• Choose Language
  • Cold-rolled - High-strength steel

    Tata Steel offers a range of steels for applications requiring high strength without the weight penalty.

    The range comprises micro-alloyed, rephosphorised and carbon manganese high-strength steels in cold-rolled uncoated condition. These steels are ideal for strong, thin-gauge products.

    Cold rolled steel: consistent, reliable products

    Our advanced and ultra high-strength cold-rolled steels DP600, DP800, DP1000 and HQ1500 are lightweight and enable design freedom for complex parts.

    Their high yield and ductility ensure shape accuracy and tolerancing, which enable thickness reduction and maintained in-service performance for difficult-to-form parts.

    Contact us

    Tata Steel

    PO Box 10.000

    1970 CA IJmuiden

    Netherlands

    Helpdesk

    T +31 (0)251 494191

    Overview

    Micro-alloyed grades

    Micro-alloyed grades have high-strength levels through precipitation and grain refinement hardening. Careful use of alloying elements ensures high mechanical resistance and good weldability. There is limited scope for cold forming.

    Tata Steel supplies high-strength micro-alloyed (HSLA) steel which complies with European standard EN 10268:2006+A1:2013.

    Bake-hardening grades

    Bake-hardening steel gains extra strength after going through an automotive paint oven.  The benefit of this is a product with relatively good formability, combined with a higher strength final part.

    Rephosphorised grades

    These grades deliver high mechanical resistance and good suitability for cold forming due to solid solution hardening by phosphorus. Our rephosphorised grades are highly suited to the manufacture of car body panels and structural components because of their good resistance to impact and fatigue.

    Carbon manganese grades                                                                             

    Our carbon manganese product combines high strength with excellent formability for the most difficult cold-forming applications.

     

    Applications

    Automotive components
    Construction components
    Furniture
    Precision tubes

    Relationship with standards

    Tata Steel can supply the following cold-rolled high-strength steel grades:

    Micro-alloyed grades

    EN 10268:2006+A1:2013

    EN 10268: 1999

    Grade

    Grade

    HC260LA

    H240LA

    HC300LA

    H280LA

    HC340LA

    H320LA

    HC380LA

    H360LA

    HC420LA

    H400LA

     

    Bake-hardening grades

    EN10338: 2010

    VDA239

    HC220B

    CR210BH

     

    Rephosphorised grades

    Grade

    SEW 094 Grade

    HC220P

    ZSt E220P

    HC260P

    ZSt E260P

     

    Carbon manganese grades

    Grade

    Grade

    HC300CM

    No EN specified equivalent

    The carbon manganese product is supplied to Tata Steel’s own standard. There is no direct EN standard equivalent.

     

    RADECOL grades

    Grade

    Grade

    RADECOL 2

    No EN specified equivalent

    RADECOL 3

    No EN specified equivalent

    The RADECOL product is supplied to Tata Steel’s own standard. There is no direct EN standard equivalent.

     

     

    back to top

    Properties

    Mechanical properties

    The available grades have the following mechanical properties measured perpendicular to the rolling direction (transverse test pieces):

    Micro-alloyed grades

    EN 10268:
    2006+A1:2013

    Yield strength
     Rp0.2 1

    Tensile strength Rm

    Min. elongation after fracture
    A 2

    Min. r-value r90 3

    Min. n-value n90

    Grade

    N/mm2

    N/mm2

    %

     

     

    HC260LA

    260 - 330

    350 - 430

    26

    -

    -

    HC300LA

    300 - 380

    380 - 480

    23

    -

    -

    HC340LA

    340 - 420

    410 - 510

    21

    -

    -

    HC380LA

    380 - 480

    440 - 580

    19

    -

    -

    HC420LA

    420 - 520

    470 - 600

    17

    -

    -

     

    Bake-hardening grades

    EN EN10338:
    2010

    Yield strength Re 1

    Tensile strength Rm

    Min. elongation after fracture
    A 2

    Min. r-value r90 3

    Min. n-value n90

    Min. BH2

    Grade

    N/mm2

    N/mm2

    %

     

     

    N/mm2

    HC220B

    220 - 270

    320 - 400

    32

    1.5

    0.16

    35


     

    Rephosphorised grades

     

    Yield strength Re 1

    Tensile strength Rm

    Min. elongation after fracture
    A 2

    Min. r-value
    r90 3

    Min. n-value n90

    Grade

    N/mm2

    N/mm2

    %

     

     

    HC220P

    220 - 270

    320 - 400

    32

    1.3

    0.16

    HC260P

    260 - 320

    360 - 440

    29

    -

    -

    1. If the yield strength is pronounced (yield flag), the values apply to the lower yield point (ReL).
    2. When thickness ≤ 0.7mm, the minimum value for elongation is reduced by 2%.
    3. For products with thickness > 2mm the minimum r90 is reduced by 0.2.

     

    Carbon manganese steel

     

    Yield strength ReL

    Tensile strength Rm

    Min. elongation
    after fracture A

    Grade

    N/mm2

    N/mm2

    %

    HC300CM

    300 - 360

    440 - 500

    26

     

     

    RADECOL grades

     

    Yield strength
    Rp0.2 1

    Tensile strength
    Rm

    Min. elongation after fracture
    A

    Grade

    N/mm2

    N/mm2

    %

    RADECOL 2

    245 - 330

    350 - 440

    26

    RADECOL 3

    300 - 380

    380 - 480

    23

     

     

    Chemical composition

    Cold-rolled high-strength steels supplied by Tata Steel comply to the following cast analysis with maximum values in weight percentages unless otherwise shown:

    Micro-alloyed grades

    EN 10268:2006+A1:2013

    C

    Mn

    Si

    P

    S

    Al

    Ti 1

    Nb 1

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    HC260LA

    0.10

    1.0

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC300LA

    0.12

    1.4

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC340LA

    0.12

    1.5

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC380LA

    0.12

    1.6

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC420LA

    0.14

    1.6

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    1. These additional elements may be used individually or in combination where they appear in the definition of the steel within the composition limits indicated. Vanadium and boron may also be added. However, the sum of the contents of these four dispersoidal elements shall not exceed 0.22%.
    Values in weight %.

     

    Bake-hardening grades

    EN 10338, 2010

    C

    Mn

    Si

    P

    S

    Al

    Ti

    Nb

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    HC220B

    0.08

    0.7

    0.5

    0.085

    0.025

    0.015

    -

    -

    Values in weight percentages.

     

    Rephosphorised grades

     

    C

    Mn

    Si

    P

    S

    Al

    Ti

    Nb

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    HC220P

    0.07

    0.7

    0.5

    0.08

    0.025

    0.015

    -

    -

    HC260P

    0.08

    0.7

    0.5

    0.1

    0.025

    0.015

    -

    -

    Values in weight percentages.

     

    Carbon manganese grades

     

    C

    Mn

    Si

    P

    S

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    HC300CM

    0.18

    1.40

    0.03

    0.025

    0.012

    Values in weight percentages.

     

    RADECOL grades

     

    C

    Mn

    Si

    P

    S

    S.Al

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    RADECOL 2

    0.12

    1.10

    0.5

    0.10

    0.025

    0.015

    RADECOL 3

    0.11

    1.00

    0.5

    0.12

    0.025

    0.015

    Values in weight percentages.

     

    back to top

    Dimensions

    Dimensional Capability

    For steel produced in the UK – continuously annealed (CA).

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HC260LA

    HC300LA

    HC340LA

    HC380LA

    HC420LA

    0.40 - 0.43

    1330

    -

    -

    -

    -

    0.43 - 0.50

    1390

    -

    -

    -

    -

    0.50 - 0.55

    1525

    -

    -

    -

    -

    0.55 - 0.60

    1525

    -

    -

    -

    -

    0.60 - 0.65

    1525

    1405

    1360

    1258

    -

    0.65 - 0.70

    1725

    1405

    1360

    1258

    -

    0.70 - 0.80

    1725

    1405

    1360

    1258

    -

    0.80 - 0.90

    1725

    1405

    1360

    1258

    -

    0.90 - 0.95

    1725

    1405

    1360

    1298

    -

    0.95 - 0.99

    1725

    1405

    1530

    1338

    -

    0.99 - 1.00

    1815

    1405

    1530

    1338

    -

    1.00 - 1.10

    1815

    1560

    1530

    1378

    1300

    1.10 - 1.20

    1815

    1560

    1530

    1378

    1300

    1.20 - 1.28

    1815

    1475

    1530

    1378

    1300

    1.28 - 1.30

    1815

    1475

    1530

    1398

    1300

    1.30 - 1.40

    1815

    1475

    1530

    1398

    1300

    1.40 - 1.50

    1815

    1475

    1530

    1398

    1300

    1.50 - 1.60

    1815

    1450

    1450

    1398

    -

    1.60 - 1.70

    1450

    1450

    1450

    1398

    -

    1.70 - 1.80

    1450

    1450

    1450

    1398

    -

    1.80 - 1.86

    1450

    1450

    1450

    1398

    -

    1.86 - 1.90

    1450

    1450

    1450

    1450

    -

    1.90 - 2.00

    1450

    1450

    1450

    1450

    -

    Minimum width is 825mm for HC420LA.
    Minimum width is 900mm for all other grades
     

    Thickness

    Max. width

    From - up to

    HC220B

    HC220P

    HC260P

    HC300M

    RADECOL 2

    RADECOL 3

    0.40 - 0.43

    -

    -

    -

    -

    1330

    0.43 - 0.50

    -

    -

    -

    -

    1390 

    0.50 - 0.55

    1500

    -

    -

    -

    1525 

    0.55 - 0.60

    1500

    -

    -

    -

    1525  -

    0.60 - 0.65

    1500

    -

    -

    -

    1525  1405

    0.65 - 0.70

    1500

    -

    -

    1400

    1725  1405 

    0.70 - 0.80

    1500

    -

    -

    1400

    1725  1405 

    0.80 - 0.90

    1500

    -

    -

    1400

    1725  1405 

    0.90 - 0.95

    1500

    -

    -

    1400

    1725  1405 

    0.95 - 0.99

    1500

    -

    -

    1400

    1725 1405 

    0.99 - 1.00

    1500

    -

    -

    1400

    1815  1405

    1.00 - 1.10

    1500

    -

    -

    1400

    1815  1560 

    1.10 - 1.20

    1500

    -

    -

    1400

    1815  1560 

    1.20 - 1.28

    1500

    -

    -

    1400

    1815  1475 

    1.28 - 1.30

    1500

    -

    -

    1400

    1815  1475 

    1.30 - 1.40

    1500

    -

    -

    1400

    1815  1475 

    1.40 - 1.50

    1500

    -

    -

    1400

    1815  1475 

    1.50 - 1.60

    1500

    -

    -

    1400

    1815 1450 

    1.60 - 1.70

    1500

    -

    -

    -

    1450 1450 

    1.70 - 1.80

    1500

    -

    -

    -

    1450  1450 

    1.80 - 1.86

    1500

    -

    -

    -

    1450  1450 

    1.86 - 1.90

    1500

    -

    -

    -

    1450  1450 

    1.90 - 2.00

    1500

    -

    -

    -

    1450  1450 

    Minimum width is 900mm.

     

    For steel produced in the Netherlands - batch annealed (BA).

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HC260LA

    HC300LA

    HC340LA

    HC380LA

    HC420LA

    0.40 - 0.43

    1500

    1400

    -

    -

    -

    0.43 - 0.50

    1500

    1400

    -

    -

    -

    0.50 - 0.55

    1600

    1480

    -

    -

    -

    0.55 - 0.60

    1650

    1490

    -

    1250

    -

    0.60 - 0.65

    1700

    1510

    1220

    1350

    1120

    0.65 - 0.70

    1720

    1580

    1330

    1350

    1190

    0.70 - 0.80

    1750

    1610

    1430

    1410

    1210

    0.80 - 0.90

    1800

    1660

    1480

    1450

    1260

    0.90 - 1.00

    1850

    1670

    1530

    1500

    1290

    1.00 - 1.10

    1880

    1740

    1570

    1570

    1320

    1.10 - 1.20

    1920

    1740

    1610

    1610

    1370

    1.20 - 1.21

    1940

    1740

    1660

    1670

    1390

    1.21 - 1.30

    1940

    1800

    1660

    1670

    1390

    1.30 - 1.40

    1970

    1810

    1700

    1670

    1370

    1.40 - 1.50

    1970

    1840

    1700

    1700

    1350

    1.50 - 1.60

    1970

    1860

    1650

    1730

    1330

    1.60 - 1.70

    1970

    1840

    1650

    1700

    1310

    1.70 - 1.80

    1950

    1800

    1630

    1670

    1300

    1.80 - 1.90

    1920

    1770

    1600

    1600

    1280

    1.90 - 2.00

    1850

    1740

    1570

    1550

    1260

    2.00 - 2.10

    1800

    1690

    1540

    1510

    1240

    2.10 - 2.20

    1740

    1640

    1470

    1480

    1220

    2.20 - 2.30

    1670

    1590

    1400

    1400

    1210

    2.30 - 2.40

    1600

    1540

    1340

    1350

    1190

    2.40 - 2.50

    1540

    1480

    1290

    1290

    1170

    2.50 - 2.60

    1490

    1430

    1240

    1240

    1150

    2.60 - 2.70

    1440

    1380

    1190

    1220

    1130

    2.70 - 2.80

    1390

    1330

    1150

    1170

    -

    2.80 - 2.90

    1340

    1280

    -

    -

    -

    2.90 - 3.00

    -

    1240

    -

    -

    -

    Minimum width is 1050mm for HC380LA and HC420LA.
    Minimum width is 900mm for the other grades.
    Other dimensions are available on request - please contact us.

     

    For steel produced in the Netherlands - batch annealed (BA).

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HC220P

    HC260P

    HC300M

    0.40 - 0.43

    -

    -

    -

    0.43 - 0.50

    -

    -

    -

    0.50 - 0.55

    1500

    1500

    -

    0.55 - 0.60

    1500

    1500

    -

    0.60 - 0.65

    1800

    1800

    -

    0.65 - 0.70

    1800

    1800

    -

    0.70 - 0.80

    1800

    1800

    -

    0.80 - 0.90

    1800

    1800

    -

    0.90 - 1.00

    1800

    1800

    -

    1.00 - 2.00

    1800

    1800

    -

    2.00 - 2.10

    1800

    1800

    -

    2.10 - 2.20

    1800

    1800

    -

    2.20 - 2.30

    1700

    1700

    -

    2.30 - 2.40

    1700

    1700

    -

    2.40 - 2.50

    1600

    1600

    -

    2.50 - 2.60

    1600

    1600

    -

    2.60 - 2.70

    1600

    1600

    -

    2.70 - 2.80

    1400

    1400

    -

    2.80 - 2.90

    1400

    1400

    -

    2.90 - 3.00

    1400

    1400

    -

    Minimum width is 900mm.
    Other dimensions are available on request - please contact us.
     

    Tolerances

    Tolerances comply with standard EN 10131: 2006 (click here).
    Tighter tolerances are available, please contact us for details.

     

    back to top

    Overview

    Overview

    Micro-alloyed grades

    Micro-alloyed grades have high-strength levels through precipitation and grain refinement hardening. Careful use of alloying elements ensures high mechanical resistance and good weldability. There is limited scope for cold forming.

    Tata Steel supplies high-strength micro-alloyed (HSLA) steel which complies with European standard EN 10268:2006+A1:2013.

    Bake-hardening grades

    Bake-hardening steel gains extra strength after going through an automotive paint oven.  The benefit of this is a product with relatively good formability, combined with a higher strength final part.

    Rephosphorised grades

    These grades deliver high mechanical resistance and good suitability for cold forming due to solid solution hardening by phosphorus. Our rephosphorised grades are highly suited to the manufacture of car body panels and structural components because of their good resistance to impact and fatigue.

    Carbon manganese grades                                                                             

    Our carbon manganese product combines high strength with excellent formability for the most difficult cold-forming applications.

     

    Applications

    Automotive components
    Construction components
    Furniture
    Precision tubes

    Relationship with standards

    Tata Steel can supply the following cold-rolled high-strength steel grades:

    Micro-alloyed grades

    EN 10268:2006+A1:2013

    EN 10268: 1999

    Grade

    Grade

    HC260LA

    H240LA

    HC300LA

    H280LA

    HC340LA

    H320LA

    HC380LA

    H360LA

    HC420LA

    H400LA

     

    Bake-hardening grades

    EN10338: 2010

    VDA239

    HC220B

    CR210BH

     

    Rephosphorised grades

    Grade

    SEW 094 Grade

    HC220P

    ZSt E220P

    HC260P

    ZSt E260P

     

    Carbon manganese grades

    Grade

    Grade

    HC300CM

    No EN specified equivalent

    The carbon manganese product is supplied to Tata Steel’s own standard. There is no direct EN standard equivalent.

     

    RADECOL grades

    Grade

    Grade

    RADECOL 2

    No EN specified equivalent

    RADECOL 3

    No EN specified equivalent

    The RADECOL product is supplied to Tata Steel’s own standard. There is no direct EN standard equivalent.

     

     

    back to top

    Properties

    Properties

    Mechanical properties

    The available grades have the following mechanical properties measured perpendicular to the rolling direction (transverse test pieces):

    Micro-alloyed grades

    EN 10268:
    2006+A1:2013

    Yield strength
     Rp0.2 1

    Tensile strength Rm

    Min. elongation after fracture
    A 2

    Min. r-value r90 3

    Min. n-value n90

    Grade

    N/mm2

    N/mm2

    %

     

     

    HC260LA

    260 - 330

    350 - 430

    26

    -

    -

    HC300LA

    300 - 380

    380 - 480

    23

    -

    -

    HC340LA

    340 - 420

    410 - 510

    21

    -

    -

    HC380LA

    380 - 480

    440 - 580

    19

    -

    -

    HC420LA

    420 - 520

    470 - 600

    17

    -

    -

     

    Bake-hardening grades

    EN EN10338:
    2010

    Yield strength Re 1

    Tensile strength Rm

    Min. elongation after fracture
    A 2

    Min. r-value r90 3

    Min. n-value n90

    Min. BH2

    Grade

    N/mm2

    N/mm2

    %

     

     

    N/mm2

    HC220B

    220 - 270

    320 - 400

    32

    1.5

    0.16

    35


     

    Rephosphorised grades

     

    Yield strength Re 1

    Tensile strength Rm

    Min. elongation after fracture
    A 2

    Min. r-value
    r90 3

    Min. n-value n90

    Grade

    N/mm2

    N/mm2

    %

     

     

    HC220P

    220 - 270

    320 - 400

    32

    1.3

    0.16

    HC260P

    260 - 320

    360 - 440

    29

    -

    -

    1. If the yield strength is pronounced (yield flag), the values apply to the lower yield point (ReL).
    2. When thickness ≤ 0.7mm, the minimum value for elongation is reduced by 2%.
    3. For products with thickness > 2mm the minimum r90 is reduced by 0.2.

     

    Carbon manganese steel

     

    Yield strength ReL

    Tensile strength Rm

    Min. elongation
    after fracture A

    Grade

    N/mm2

    N/mm2

    %

    HC300CM

    300 - 360

    440 - 500

    26

     

     

    RADECOL grades

     

    Yield strength
    Rp0.2 1

    Tensile strength
    Rm

    Min. elongation after fracture
    A

    Grade

    N/mm2

    N/mm2

    %

    RADECOL 2

    245 - 330

    350 - 440

    26

    RADECOL 3

    300 - 380

    380 - 480

    23

     

     

    Chemical composition

    Cold-rolled high-strength steels supplied by Tata Steel comply to the following cast analysis with maximum values in weight percentages unless otherwise shown:

    Micro-alloyed grades

    EN 10268:2006+A1:2013

    C

    Mn

    Si

    P

    S

    Al

    Ti 1

    Nb 1

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    HC260LA

    0.10

    1.0

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC300LA

    0.12

    1.4

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC340LA

    0.12

    1.5

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC380LA

    0.12

    1.6

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC420LA

    0.14

    1.6

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    1. These additional elements may be used individually or in combination where they appear in the definition of the steel within the composition limits indicated. Vanadium and boron may also be added. However, the sum of the contents of these four dispersoidal elements shall not exceed 0.22%.
    Values in weight %.

     

    Bake-hardening grades

    EN 10338, 2010

    C

    Mn

    Si

    P

    S

    Al

    Ti

    Nb

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    HC220B

    0.08

    0.7

    0.5

    0.085

    0.025

    0.015

    -

    -

    Values in weight percentages.

     

    Rephosphorised grades

     

    C

    Mn

    Si

    P

    S

    Al

    Ti

    Nb

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    HC220P

    0.07

    0.7

    0.5

    0.08

    0.025

    0.015

    -

    -

    HC260P

    0.08

    0.7

    0.5

    0.1

    0.025

    0.015

    -

    -

    Values in weight percentages.

     

    Carbon manganese grades

     

    C

    Mn

    Si

    P

    S

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    HC300CM

    0.18

    1.40

    0.03

    0.025

    0.012

    Values in weight percentages.

     

    RADECOL grades

     

    C

    Mn

    Si

    P

    S

    S.Al

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    RADECOL 2

    0.12

    1.10

    0.5

    0.10

    0.025

    0.015

    RADECOL 3

    0.11

    1.00

    0.5

    0.12

    0.025

    0.015

    Values in weight percentages.

     

    back to top

    Dimensions

    Dimensions

    Dimensional Capability

    For steel produced in the UK – continuously annealed (CA).

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HC260LA

    HC300LA

    HC340LA

    HC380LA

    HC420LA

    0.40 - 0.43

    1330

    -

    -

    -

    -

    0.43 - 0.50

    1390

    -

    -

    -

    -

    0.50 - 0.55

    1525

    -

    -

    -

    -

    0.55 - 0.60

    1525

    -

    -

    -

    -

    0.60 - 0.65

    1525

    1405

    1360

    1258

    -

    0.65 - 0.70

    1725

    1405

    1360

    1258

    -

    0.70 - 0.80

    1725

    1405

    1360

    1258

    -

    0.80 - 0.90

    1725

    1405

    1360

    1258

    -

    0.90 - 0.95

    1725

    1405

    1360

    1298

    -

    0.95 - 0.99

    1725

    1405

    1530

    1338

    -

    0.99 - 1.00

    1815

    1405

    1530

    1338

    -

    1.00 - 1.10

    1815

    1560

    1530

    1378

    1300

    1.10 - 1.20

    1815

    1560

    1530

    1378

    1300

    1.20 - 1.28

    1815

    1475

    1530

    1378

    1300

    1.28 - 1.30

    1815

    1475

    1530

    1398

    1300

    1.30 - 1.40

    1815

    1475

    1530

    1398

    1300

    1.40 - 1.50

    1815

    1475

    1530

    1398

    1300

    1.50 - 1.60

    1815

    1450

    1450

    1398

    -

    1.60 - 1.70

    1450

    1450

    1450

    1398

    -

    1.70 - 1.80

    1450

    1450

    1450

    1398

    -

    1.80 - 1.86

    1450

    1450

    1450

    1398

    -

    1.86 - 1.90

    1450

    1450

    1450

    1450

    -

    1.90 - 2.00

    1450

    1450

    1450

    1450

    -

    Minimum width is 825mm for HC420LA.
    Minimum width is 900mm for all other grades
     

    Thickness

    Max. width

    From - up to

    HC220B

    HC220P

    HC260P

    HC300M

    RADECOL 2

    RADECOL 3

    0.40 - 0.43

    -

    -

    -

    -

    1330

    0.43 - 0.50

    -

    -

    -

    -

    1390 

    0.50 - 0.55

    1500

    -

    -

    -

    1525 

    0.55 - 0.60

    1500

    -

    -

    -

    1525  -

    0.60 - 0.65

    1500

    -

    -

    -

    1525  1405

    0.65 - 0.70

    1500

    -

    -

    1400

    1725  1405 

    0.70 - 0.80

    1500

    -

    -

    1400

    1725  1405 

    0.80 - 0.90

    1500

    -

    -

    1400

    1725  1405 

    0.90 - 0.95

    1500

    -

    -

    1400

    1725  1405 

    0.95 - 0.99

    1500

    -

    -

    1400

    1725 1405 

    0.99 - 1.00

    1500

    -

    -

    1400

    1815  1405

    1.00 - 1.10

    1500

    -

    -

    1400

    1815  1560 

    1.10 - 1.20

    1500

    -

    -

    1400

    1815  1560 

    1.20 - 1.28

    1500

    -

    -

    1400

    1815  1475 

    1.28 - 1.30

    1500

    -

    -

    1400

    1815  1475 

    1.30 - 1.40

    1500

    -

    -

    1400

    1815  1475 

    1.40 - 1.50

    1500

    -

    -

    1400

    1815  1475 

    1.50 - 1.60

    1500

    -

    -

    1400

    1815 1450 

    1.60 - 1.70

    1500

    -

    -

    -

    1450 1450 

    1.70 - 1.80

    1500

    -

    -

    -

    1450  1450 

    1.80 - 1.86

    1500

    -

    -

    -

    1450  1450 

    1.86 - 1.90

    1500

    -

    -

    -

    1450  1450 

    1.90 - 2.00

    1500

    -

    -

    -

    1450  1450 

    Minimum width is 900mm.

     

    For steel produced in the Netherlands - batch annealed (BA).

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HC260LA

    HC300LA

    HC340LA

    HC380LA

    HC420LA

    0.40 - 0.43

    1500

    1400

    -

    -

    -

    0.43 - 0.50

    1500

    1400

    -

    -

    -

    0.50 - 0.55

    1600

    1480

    -

    -

    -

    0.55 - 0.60

    1650

    1490

    -

    1250

    -

    0.60 - 0.65

    1700

    1510

    1220

    1350

    1120

    0.65 - 0.70

    1720

    1580

    1330

    1350

    1190

    0.70 - 0.80

    1750

    1610

    1430

    1410

    1210

    0.80 - 0.90

    1800

    1660

    1480

    1450

    1260

    0.90 - 1.00

    1850

    1670

    1530

    1500

    1290

    1.00 - 1.10

    1880

    1740

    1570

    1570

    1320

    1.10 - 1.20

    1920

    1740

    1610

    1610

    1370

    1.20 - 1.21

    1940

    1740

    1660

    1670

    1390

    1.21 - 1.30

    1940

    1800

    1660

    1670

    1390

    1.30 - 1.40

    1970

    1810

    1700

    1670

    1370

    1.40 - 1.50

    1970

    1840

    1700

    1700

    1350

    1.50 - 1.60

    1970

    1860

    1650

    1730

    1330

    1.60 - 1.70

    1970

    1840

    1650

    1700

    1310

    1.70 - 1.80

    1950

    1800

    1630

    1670

    1300

    1.80 - 1.90

    1920

    1770

    1600

    1600

    1280

    1.90 - 2.00

    1850

    1740

    1570

    1550

    1260

    2.00 - 2.10

    1800

    1690

    1540

    1510

    1240

    2.10 - 2.20

    1740

    1640

    1470

    1480

    1220

    2.20 - 2.30

    1670

    1590

    1400

    1400

    1210

    2.30 - 2.40

    1600

    1540

    1340

    1350

    1190

    2.40 - 2.50

    1540

    1480

    1290

    1290

    1170

    2.50 - 2.60

    1490

    1430

    1240

    1240

    1150

    2.60 - 2.70

    1440

    1380

    1190

    1220

    1130

    2.70 - 2.80

    1390

    1330

    1150

    1170

    -

    2.80 - 2.90

    1340

    1280

    -

    -

    -

    2.90 - 3.00

    -

    1240

    -

    -

    -

    Minimum width is 1050mm for HC380LA and HC420LA.
    Minimum width is 900mm for the other grades.
    Other dimensions are available on request - please contact us.

     

    For steel produced in the Netherlands - batch annealed (BA).

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HC220P

    HC260P

    HC300M

    0.40 - 0.43

    -

    -

    -

    0.43 - 0.50

    -

    -

    -

    0.50 - 0.55

    1500

    1500

    -

    0.55 - 0.60

    1500

    1500

    -

    0.60 - 0.65

    1800

    1800

    -

    0.65 - 0.70

    1800

    1800

    -

    0.70 - 0.80

    1800

    1800

    -

    0.80 - 0.90

    1800

    1800

    -

    0.90 - 1.00

    1800

    1800

    -

    1.00 - 2.00

    1800

    1800

    -

    2.00 - 2.10

    1800

    1800

    -

    2.10 - 2.20

    1800

    1800

    -

    2.20 - 2.30

    1700

    1700

    -

    2.30 - 2.40

    1700

    1700

    -

    2.40 - 2.50

    1600

    1600

    -

    2.50 - 2.60

    1600

    1600

    -

    2.60 - 2.70

    1600

    1600

    -

    2.70 - 2.80

    1400

    1400

    -

    2.80 - 2.90

    1400

    1400

    -

    2.90 - 3.00

    1400

    1400

    -

    Minimum width is 900mm.
    Other dimensions are available on request - please contact us.
     

    Tolerances

    Tolerances comply with standard EN 10131: 2006 (click here).
    Tighter tolerances are available, please contact us for details.

     

    back to top