• Choose Language
  • Metallic coated - Steel for forming

    Our forming steels are available in a wide range of grades and corrosion-resistant coatings.

    Each grade is designed for specific applications and comes with a choice of surface quality. Extensive dimensional choice provides opportunities for cutting waste and maximising yield.

    • Metallic coated steel - Magizinc®

      MagiZinc® improves corrosion resistance with half the thickness of conventional zinc coatings, increasing yield, reducing cost and facilitating stronger, lighter products.

      It offers improved automotive corrosion protection and higher process efficiency.

    • High-end aesthetics

      Compared to standard hot-dip galvanised grades, the Serica surface finish reduces the ‘orange peel’ effect commonly visible on painted exposed panels.

      Serica unlocks the potential for high-end aesthetics in serial production vehicles.

    Contact us

    Tata Steel

    PO Box 10.000

    1970 CA IJmuiden

    Netherlands

    Helpdesk

    T +31 (0)251 494191

    Overview

    Applications

    Automotive components
    Building components
    Domestic appliances
    Drain pipes
    Electrical goods
    Tubes and sections

     

    Relationship with standards

    European standard

    National standards

    EN 10346:2015

    Germany

     

    DIN 17162-1

    DX51D+Z/+ZF/+ZM

    St 02 Z

    DX52D+Z/+ZF/+ZM

    St 03 Z

    DX53D+Z/+ZF/+ZM

    St 05 Z

    DX54D+Z/+ZF/+ZM

    St 06 Z

    DX56D+Z/+ZF/+ZM

    St 07 Z 1

    DX57D+Z/+ZF/+ZM

    -

    DX57D HyperForm® +Z 1

    -

    1. Not in standard. Tata Steel’s own specification.

    Properties

    Mechanical properties

    Metallic coated steel for forming has the following mechanical properties. These are measured transverse to the rolling direction:

    EN 10346:2015

    Yield
    strength 1 
    Re

    Tensile strength
    Rm

    Min. elongation after fracture 2
    A

    Min.
    r-value r90

    Min.
    n-value n90

    Grade

    N/mm²

    N/mm²

    %

     

     

    DX51D+Z/+ZF/+ZM

    -

    270 - 500

    22

    -

    -

    DX52D+Z/+ZF/+ZM

    140 - 300 3

    270 - 420

    26

    -

    -

    DX53D+Z/+ZF/+ZM

    140 - 260

    270 - 380

    30

    -

    -

    DX54D+Z

    120 - 220

    260 - 350

    36

    1.6 4

    0.18

    DX54D+ZF/+ZM

    120 - 220

    260 - 350

    34

    1.4 4

    0.18

    DX56D+Z

    120 - 180

    260 - 350

    39

    1.9 4

    0.21

    DX56D+ZF/+ZM

    120 - 180

    260 - 350

    37

    1.7 4, 5

    0.20 5

    DX57D+Z

    120 - 170

    260 - 350

    41

    2.1 4

    0.22

    DX57D+ZF/+ZM

    120 - 170

    260 - 350

    39

    1.9 4, 5

    0.21 5

    DX57D HyperForm® +Z 6

    120 - 160

    260 - 310

    43

     2.3 0.225 

    1. If the yield point is not pronounced, the values apply to the 0.2% - proof strength Rp0.2 ; if the yield
       strength is pronounced, the values apply to the lower yield point ReL.
    2. Decreased minimum elongation values apply for product thickness t ≤ 0.50mm (minus 4 units)
       and for 0.50mm ≤ t ≤ 0.70mm (minus 2 units).
    3. This value applies to skin-passed products only (surface qualities B and C).
    4. For t > 1.5mm, the minimum r90 - value reduced by 0.2 applies
    5. For t ≤ 0.70mm, the minimum r90 - value reduced by 0.2 and minimum n90- value reduced by 0.01
       apply.
    6. Not in EN 10346:2015. Tata Steel’s own specification.

     

    Chemical composition

    Tata Steel complies with the following cast analysis with maximum values in weight percentages: EN 10346:2015.

    Grade

    C

    Mn

    P

    S

    Al

    N

    Ti

     

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    DX51D+Z/+ZF/+ZM

    0.18

    1.20

    0.12

    0.045

    -

    -

    0.30

    DX52D+Z/+ZF/+ZM

    0.12

    0.60

    0.10

    0.045

    -

    -

    0.30

    DX53D+Z/+ZF/+ZM

    0.12

    0.60

    0.10

    0.045

    -

    -

    0.30

    DX54D+Z/+ZF/+ZM

    0.12

    0.60

    0.10

    0.045

    -

    -

    0.30

    DX56D+Z/+ZF/+ZM

    0.12

    0.60

    0.10

    0.045

    -

    -

    0.30

    DX57D+Z/+ZF/+ZM

    0.12

    0.60

    0.10

    0.045

    -

    -

    0.30

    DX57D HyperForm® +Z 1

    0.12

    0.60

    0.10

    0.045

    -

    -

    0.30

    All values in weight%.

    1. Not in EN 10346:2015. Tata Steel’s own specification.

     

    back to top

    Dimensions

    Dimensional capability

    Galvanised (+Z) products, for steel produced in the Netherlands.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    DX51D

    DX52D

    DX53D

    DX54D

    DX56D

    DX57D 

    DX57D HyperForm®

    0.35 - 0.40

    1370

    -

    -

    -

    -

    -

    -

    0.40 - 0.45

    1520

    1520

    -

    -

    -

    -

    -

    0.45 - 0.50

    1520

    1520

    1520

    1350

    1350

    -

    -

    0.50 - 0.55

    1520

    1520

    1540

    1500

    1500

    1470

    -

    0.55 - 0.60

    1590

    1590

    1640

    1620

    1620

    1590

    -

    0.60 - 0.65

    1770

    1770

    1740

    1730

    1730

    1710

    1800

    0.65 - 0.70

    1870

    1870

    1830

    1870

    1870

    1790

    1820

    0.70 - 0.75

    1890

    1890

    1910

    1970

    1970

    1790

    1780

    0.75 - 0.80

    1990

    1990

    1950

    1970

    1970

    1720

    1710

    0.80 - 0.90

    2020

    2020

    2000

    1970

    1970

    1610

    1600

    0.90 - 1.00

    2020

    2020

    2000

    1970

    1970

    1480

    1490

    1.00 - 1.10

    2020

    2020

    2000

    1970

    1970

    -

    -

    1.10 - 1.20

    2020

    2020

    2000

    1970

    1970

    -

    -

    1.20 - 1.30

    2020

    2020

    1940

    1940

    1940

    -

    -

    1.30 - 1.40

    2020

    2020

    1890

    1840

    1840

    -

    -

    1.40 - 1.50

    2020

    2020

    1830

    1840

    1840

    -

    -

    1.50 - 1.60

    2020

    2020

    1740

    1840

    1840

    -

    -

    1.60 - 1.70

    2020

    2020

    1640

    1800

    1800

    -

    -

    1.70 - 1.75

    2000

    1970

    1600

    1720

    1720

    -

    -

    1.75 - 1.90

    2000

    1970

    1530

    1630

    1630

    -

    -

    1.90 - 2.00

    2000

    1970

    1450

    1530

    1530

    -

    -

    2.00 - 2.25

    1580

    1580

    -

    -

    -

    -

    -

    2.25 - 2.40

    1580

    1580

    -

    -

    -

    -

    -

    2.40 - 2.50

    1580

    1580

    -

    -

    -

    -

    -

    2.50 - 3.00

    1540

    1540

    -

    -

    -

    -

    -

    3.00 - 3.50

    1540

    1540

    -

    -

    -

    -

    -

    3.50 - 3.60

    1500

    1500

    -

    -

    -

    -

    -

    3.60 - 3.70

    1450

    1450

    -

    -

    -

    -

    -

    3.70 - 3.85

    1400

    1400

    -

    3.85 - 4.00

    1350

    1350

    -

    -

    -

    -

    -

    The minimum width is 900mm except for thickness over 3.00mm where the minimum width is 1000mm.
    Widths smaller than 900 mm are available on request. Please contact us.
    Surface quality MA, MB, MC available. Please contact us about the availability of surface quality C with a thickness greater than 1.2mm. 
    Serica® premium surface quality availability can be found in our dedicated Serica® page.
    Thicknesses greater than 3mm will be supplied in oscillated coiled condition.

     

    Galvanised (+Z) products, for steel produced in the UK.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    DX51D

    DX52D

    DX53D

    DX54D

    DX56D

    DX57D

    DX57D HyperForm®

    0.36 - 0.40

    1349

    -

    -

    -

    -

    -

    0.40 - 0.45

    1375

    1375

    -

    -

    -

    -

    0.45 - 0.50

    1375

    1375

    -

    -

    -

    -

    0.50 - 0.55

    1375

    1375

    1250

    1250

    -

    -

    0.55 - 0.58

    1520

    1570

    1544

    1544

    1544

    -

    0.58 - 0.60

    1520

    1570

    1544

    1544

    1544

    1550

    0.60 - 0.65

    1525

    1570

    1570

    1573

    1573

    1570

    0.65 - 0.66

    1525

    1640

    1644

    1647

    1647

    1650

    0.66 - 0.70

    1650

    1650

    1644

    1647

    1647

    1650

    0.70 - 0.72

    1750

    1650

    1694

    1794

    1794

    1750

    0.72 - 0.75

    1750

    1650

    1694

    1794

    1794

    1794

    0.75 - 0.80

    1750

    1650

    1694

    1800

    1800

    1800

    0.80 - 0.90

    1800

    1650

    1694

    1800

    1800

    1800

    0.90 - 0.95

    1830

    1650

    1694

    1800

    1800

    1800

    0.95 - 1.00

    1830

    1650

    1694

    1800

    1800

    1800

    1.00 - 1.25

    1830

    1650

    1694

    1800

    1800

    1800

    1.25 - 1.35

    1830

    1640

    1694

    1794

    1794

    1794

    1.35 - 1.50

    1830

    1640

    1694

    1794

    1794

    1794

    1.50 - 1.60

    1750

    1640

    1673

    1753

    1753

    -

    1.60 - 1.65

    1650

    1640

    1673

    1727

    1727

    -

    1.65 - 1.70

    1650

    1380

    1570

    1727

    1727

    -

    1.70 - 1.75

    1560

    1380

    1570

    1727

    1727

    -

    1.75 - 1.80

    1560

    1380

    1570

    1727

    1727

    -

    1.80 - 1.90

    1500

    1380

    1380

    1437

    1437

    -

    1.90 - 2.00

    1500

    1380

    1380

    1437

    1437

    -

    2.00 - 2.25

    1375

    -

    -

    -

    -

    -

    2.25 - 2.40

    1375

    -

    -

    -

    -

    -

    2.40 - 2.50

    1375

    -

    -

    -

    -

    -

    The minimum width is 900mm.
    Surface quality MA, MB, MC available. Please contact us about the availability of specific coating weights and surface finishes.
    Serica® premium surface quality availability can be found in our dedicated Serica® page.

    Galvannealed (+ZF) products.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    DX51D

    DX52D

    DX53D

    DX54D

    DX56D

    0.40 - 0.50

    1350

    1350

    1350

    1350

    1350

    0.50 - 0.60

    1470

    1470

    1470

    1470

    1470

    0.60 - 0.65

    1730

    1730

    1730

    1730

    1730

    0.65 - 1.60

    1850

    1850

    1850

    1850

    1850

    1.60 - 1.75

    1680

    1680

    1680

    1680

    1680

    The minimum width is 900mm.
    For DX57D, please contact us for available widths.

    MagiZinc® (+ZM) products.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    DX51D

    DX52D

    DX53D

    DX54D

    DX56D

    0.40 - 0.45

    1520

    1520

    -

    -

    -

    0.45 - 0.60

    1520

    1520

    1520

    1520

    1520

    0.60 - 1.20

    1550

    1550

    1550

    1550

    1550

    1.20 - 2.00

    1550

    1550

    1550

    1550

    -

    The minimum width is 900mm.
    For DX57D, please contact us for available widths.

     

    Tolerances

    Tolerances comply with standard EN 10143:2006 (click here).

    Tighter tolerances are available on request.

     

    back to top

     

    Overview

    Overview

    Applications

    Automotive components
    Building components
    Domestic appliances
    Drain pipes
    Electrical goods
    Tubes and sections

     

    Relationship with standards

    European standard

    National standards

    EN 10346:2015

    Germany

     

    DIN 17162-1

    DX51D+Z/+ZF/+ZM

    St 02 Z

    DX52D+Z/+ZF/+ZM

    St 03 Z

    DX53D+Z/+ZF/+ZM

    St 05 Z

    DX54D+Z/+ZF/+ZM

    St 06 Z

    DX56D+Z/+ZF/+ZM

    St 07 Z 1

    DX57D+Z/+ZF/+ZM

    -

    DX57D HyperForm® +Z 1

    -

    1. Not in standard. Tata Steel’s own specification.

    Properties

    Properties

    Mechanical properties

    Metallic coated steel for forming has the following mechanical properties. These are measured transverse to the rolling direction:

    EN 10346:2015

    Yield
    strength 1 
    Re

    Tensile strength
    Rm

    Min. elongation after fracture 2
    A

    Min.
    r-value r90

    Min.
    n-value n90

    Grade

    N/mm²

    N/mm²

    %

     

     

    DX51D+Z/+ZF/+ZM

    -

    270 - 500

    22

    -

    -

    DX52D+Z/+ZF/+ZM

    140 - 300 3

    270 - 420

    26

    -

    -

    DX53D+Z/+ZF/+ZM

    140 - 260

    270 - 380

    30

    -

    -

    DX54D+Z

    120 - 220

    260 - 350

    36

    1.6 4

    0.18

    DX54D+ZF/+ZM

    120 - 220

    260 - 350

    34

    1.4 4

    0.18

    DX56D+Z

    120 - 180

    260 - 350

    39

    1.9 4

    0.21

    DX56D+ZF/+ZM

    120 - 180

    260 - 350

    37

    1.7 4, 5

    0.20 5

    DX57D+Z

    120 - 170

    260 - 350

    41

    2.1 4

    0.22

    DX57D+ZF/+ZM

    120 - 170

    260 - 350

    39

    1.9 4, 5

    0.21 5

    DX57D HyperForm® +Z 6

    120 - 160

    260 - 310

    43

     2.3 0.225 

    1. If the yield point is not pronounced, the values apply to the 0.2% - proof strength Rp0.2 ; if the yield
       strength is pronounced, the values apply to the lower yield point ReL.
    2. Decreased minimum elongation values apply for product thickness t ≤ 0.50mm (minus 4 units)
       and for 0.50mm ≤ t ≤ 0.70mm (minus 2 units).
    3. This value applies to skin-passed products only (surface qualities B and C).
    4. For t > 1.5mm, the minimum r90 - value reduced by 0.2 applies
    5. For t ≤ 0.70mm, the minimum r90 - value reduced by 0.2 and minimum n90- value reduced by 0.01
       apply.
    6. Not in EN 10346:2015. Tata Steel’s own specification.

     

    Chemical composition

    Tata Steel complies with the following cast analysis with maximum values in weight percentages: EN 10346:2015.

    Grade

    C

    Mn

    P

    S

    Al

    N

    Ti

     

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    DX51D+Z/+ZF/+ZM

    0.18

    1.20

    0.12

    0.045

    -

    -

    0.30

    DX52D+Z/+ZF/+ZM

    0.12

    0.60

    0.10

    0.045

    -

    -

    0.30

    DX53D+Z/+ZF/+ZM

    0.12

    0.60

    0.10

    0.045

    -

    -

    0.30

    DX54D+Z/+ZF/+ZM

    0.12

    0.60

    0.10

    0.045

    -

    -

    0.30

    DX56D+Z/+ZF/+ZM

    0.12

    0.60

    0.10

    0.045

    -

    -

    0.30

    DX57D+Z/+ZF/+ZM

    0.12

    0.60

    0.10

    0.045

    -

    -

    0.30

    DX57D HyperForm® +Z 1

    0.12

    0.60

    0.10

    0.045

    -

    -

    0.30

    All values in weight%.

    1. Not in EN 10346:2015. Tata Steel’s own specification.

     

    back to top

    Dimensions

    Dimensions

    Dimensional capability

    Galvanised (+Z) products, for steel produced in the Netherlands.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    DX51D

    DX52D

    DX53D

    DX54D

    DX56D

    DX57D 

    DX57D HyperForm®

    0.35 - 0.40

    1370

    -

    -

    -

    -

    -

    -

    0.40 - 0.45

    1520

    1520

    -

    -

    -

    -

    -

    0.45 - 0.50

    1520

    1520

    1520

    1350

    1350

    -

    -

    0.50 - 0.55

    1520

    1520

    1540

    1500

    1500

    1470

    -

    0.55 - 0.60

    1590

    1590

    1640

    1620

    1620

    1590

    -

    0.60 - 0.65

    1770

    1770

    1740

    1730

    1730

    1710

    1800

    0.65 - 0.70

    1870

    1870

    1830

    1870

    1870

    1790

    1820

    0.70 - 0.75

    1890

    1890

    1910

    1970

    1970

    1790

    1780

    0.75 - 0.80

    1990

    1990

    1950

    1970

    1970

    1720

    1710

    0.80 - 0.90

    2020

    2020

    2000

    1970

    1970

    1610

    1600

    0.90 - 1.00

    2020

    2020

    2000

    1970

    1970

    1480

    1490

    1.00 - 1.10

    2020

    2020

    2000

    1970

    1970

    -

    -

    1.10 - 1.20

    2020

    2020

    2000

    1970

    1970

    -

    -

    1.20 - 1.30

    2020

    2020

    1940

    1940

    1940

    -

    -

    1.30 - 1.40

    2020

    2020

    1890

    1840

    1840

    -

    -

    1.40 - 1.50

    2020

    2020

    1830

    1840

    1840

    -

    -

    1.50 - 1.60

    2020

    2020

    1740

    1840

    1840

    -

    -

    1.60 - 1.70

    2020

    2020

    1640

    1800

    1800

    -

    -

    1.70 - 1.75

    2000

    1970

    1600

    1720

    1720

    -

    -

    1.75 - 1.90

    2000

    1970

    1530

    1630

    1630

    -

    -

    1.90 - 2.00

    2000

    1970

    1450

    1530

    1530

    -

    -

    2.00 - 2.25

    1580

    1580

    -

    -

    -

    -

    -

    2.25 - 2.40

    1580

    1580

    -

    -

    -

    -

    -

    2.40 - 2.50

    1580

    1580

    -

    -

    -

    -

    -

    2.50 - 3.00

    1540

    1540

    -

    -

    -

    -

    -

    3.00 - 3.50

    1540

    1540

    -

    -

    -

    -

    -

    3.50 - 3.60

    1500

    1500

    -

    -

    -

    -

    -

    3.60 - 3.70

    1450

    1450

    -

    -

    -

    -

    -

    3.70 - 3.85

    1400

    1400

    -

    3.85 - 4.00

    1350

    1350

    -

    -

    -

    -

    -

    The minimum width is 900mm except for thickness over 3.00mm where the minimum width is 1000mm.
    Widths smaller than 900 mm are available on request. Please contact us.
    Surface quality MA, MB, MC available. Please contact us about the availability of surface quality C with a thickness greater than 1.2mm. 
    Serica® premium surface quality availability can be found in our dedicated Serica® page.
    Thicknesses greater than 3mm will be supplied in oscillated coiled condition.

     

    Galvanised (+Z) products, for steel produced in the UK.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    DX51D

    DX52D

    DX53D

    DX54D

    DX56D

    DX57D

    DX57D HyperForm®

    0.36 - 0.40

    1349

    -

    -

    -

    -

    -

    0.40 - 0.45

    1375

    1375

    -

    -

    -

    -

    0.45 - 0.50

    1375

    1375

    -

    -

    -

    -

    0.50 - 0.55

    1375

    1375

    1250

    1250

    -

    -

    0.55 - 0.58

    1520

    1570

    1544

    1544

    1544

    -

    0.58 - 0.60

    1520

    1570

    1544

    1544

    1544

    1550

    0.60 - 0.65

    1525

    1570

    1570

    1573

    1573

    1570

    0.65 - 0.66

    1525

    1640

    1644

    1647

    1647

    1650

    0.66 - 0.70

    1650

    1650

    1644

    1647

    1647

    1650

    0.70 - 0.72

    1750

    1650

    1694

    1794

    1794

    1750

    0.72 - 0.75

    1750

    1650

    1694

    1794

    1794

    1794

    0.75 - 0.80

    1750

    1650

    1694

    1800

    1800

    1800

    0.80 - 0.90

    1800

    1650

    1694

    1800

    1800

    1800

    0.90 - 0.95

    1830

    1650

    1694

    1800

    1800

    1800

    0.95 - 1.00

    1830

    1650

    1694

    1800

    1800

    1800

    1.00 - 1.25

    1830

    1650

    1694

    1800

    1800

    1800

    1.25 - 1.35

    1830

    1640

    1694

    1794

    1794

    1794

    1.35 - 1.50

    1830

    1640

    1694

    1794

    1794

    1794

    1.50 - 1.60

    1750

    1640

    1673

    1753

    1753

    -

    1.60 - 1.65

    1650

    1640

    1673

    1727

    1727

    -

    1.65 - 1.70

    1650

    1380

    1570

    1727

    1727

    -

    1.70 - 1.75

    1560

    1380

    1570

    1727

    1727

    -

    1.75 - 1.80

    1560

    1380

    1570

    1727

    1727

    -

    1.80 - 1.90

    1500

    1380

    1380

    1437

    1437

    -

    1.90 - 2.00

    1500

    1380

    1380

    1437

    1437

    -

    2.00 - 2.25

    1375

    -

    -

    -

    -

    -

    2.25 - 2.40

    1375

    -

    -

    -

    -

    -

    2.40 - 2.50

    1375

    -

    -

    -

    -

    -

    The minimum width is 900mm.
    Surface quality MA, MB, MC available. Please contact us about the availability of specific coating weights and surface finishes.
    Serica® premium surface quality availability can be found in our dedicated Serica® page.

    Galvannealed (+ZF) products.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    DX51D

    DX52D

    DX53D

    DX54D

    DX56D

    0.40 - 0.50

    1350

    1350

    1350

    1350

    1350

    0.50 - 0.60

    1470

    1470

    1470

    1470

    1470

    0.60 - 0.65

    1730

    1730

    1730

    1730

    1730

    0.65 - 1.60

    1850

    1850

    1850

    1850

    1850

    1.60 - 1.75

    1680

    1680

    1680

    1680

    1680

    The minimum width is 900mm.
    For DX57D, please contact us for available widths.

    MagiZinc® (+ZM) products.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    DX51D

    DX52D

    DX53D

    DX54D

    DX56D

    0.40 - 0.45

    1520

    1520

    -

    -

    -

    0.45 - 0.60

    1520

    1520

    1520

    1520

    1520

    0.60 - 1.20

    1550

    1550

    1550

    1550

    1550

    1.20 - 2.00

    1550

    1550

    1550

    1550

    -

    The minimum width is 900mm.
    For DX57D, please contact us for available widths.

     

    Tolerances

    Tolerances comply with standard EN 10143:2006 (click here).

    Tighter tolerances are available on request.

     

    back to top