• Choose Language
  • Metallic coated - High-strength steel

    Our range of metallic coated high-strength steels includes micro-alloyed, phosphorus-alloyed and bake-hardening grades. Available with various corrosion-resistant coatings, they are ideal for applications requiring strength without a weight penalty. MagiZinc® coatings optimise weight savings.

    • Metallic coated - advanced high-strength steel

      Our ultra-high strength steel grades for automotive applications, such as HyperForm®, are lightweight and offer design freedom for complex parts.
      Their high yield and ductility ensure shape accuracy and tolerance control - enabling maintained in-service performance for parts that are difficult to form.

    • High paint shop yield

      The Serica premium surface finish for high quality exposed panels can lower your total cost of ownership.

      Its predictable and finely-balanced surface typography delivers excellent conditions for consistent paint appearance - and a higher paint shop yield.

    Contact us

    Tata Steel

    PO Box 10.000

    1970 CA IJmuiden

    Netherlands

    Helpdesk

    T +31 (0)251 494191

    Overview

     

    Applications

    Automotive components
    Tubes

     

    Relationship with standards

    European standard

    National standards

    EN 10346:2015

    Germany

    Phosphorus alloyed interstitial-free

     

    HX180YD+Z

     

    HX220YD+Z/+ZF

     

    HX260YD+Z/+ZF

     

    Bake-hardening

     

    HX180BD+Z/+ZF

     

    HX220BD+Z/+ZF

     

    HX260BD+Z/+ZF

     

    HX300BD+Z/+ZF

     

    Phosphorus-alloyed

    SEW 094

    HX220PD+Z/+ZF 1

    ZStE220P

    HX260PD+Z/+ZF 1

    ZStE260P

    HX300PD+Z/+ZF 1

    ZStE300P

    Micro-alloyed

    SEW 093

    HX220LAD+Z/+ZF/+ZM 1

    -

    HX260LAD+Z/+ZF/+ZM

    ZStE260

    HX300LAD+Z/+ZF/+ZM

    ZStE300

    HX340LAD+Z/+ZF/+ZM

    ZStE340

    HX380LAD+Z/+ZF/+ZM

    ZStE380

    HX420LAD+Z/+ZF/+ZM

    ZStE420

    HX460LAD+Z

    -

    HX500LAD+Z

    -

    1. Not in EN 10346:2015. Tata Steel’s own specification.

     

     

    back to top

    Properties

    Mechanical properties

    Metallic coated high-strength steel grades have the following mechanical properties (skin-passed) - these are measured transverse to the rolling direction:

    European
    standard
    EN 10346:2015

    Yield
    strength 2
    ReL

    Min.
    BH2

    Tensile strength
    Rm

    Min.
    elongation after
    fracture A

    Min. r-value

    r90

    Min. n-value

    n90

    Grade

    N/mm2

    N/mm2

    N/mm2

    %

     

     

    HX180YD+Z/+ZF

    180 - 240

    -

    330 - 390

    34

    1.7

    0.18

    HX220YD+Z/+ZF

    220 - 280

    -

    340 - 420

    32

    1.5

    0.17

    HX260YD+Z/+ZF

    260 - 320

    -

    380 - 440

    30

    1.4

    0.16

    HX180BD+Z/+ZF

    180 - 240

    30

    290 - 360

    34

    1.5

    0.16

    HX220BD+Z/+ZF

    220 - 280

    30

    320 - 400

    32

    1.2

    0.15

    HX260BD+Z/+ZF

    260 - 320

    30

    360 - 440

    28

    -

    -

    HX300BD+Z/+ZF

    300 - 360

    30

    400 - 480

    26

    -

    -

    HX220LAD+Z/+ZF/+ZM1

    220 - 300

    -

    320 - 400

    29

    -

    -

    HX260LAD+Z/+ZF/+ZM

    260 - 330

    -

    350 - 430

    26

    -

    -

    HX300LAD+Z/+ZF/+ZM

    300 - 380

    -

    380 - 480

    23

    -

    -

    HX340LAD+Z/+ZF/+ZM

    340 - 420

    -

    410 - 510

    21

    -

    -

    HX380LAD+Z/+ZF/+ZM

    380 - 480

    -

    440 - 560

    19

    -

    -

    HX420LAD+Z/+ZF/+ZM

    420 - 520

    -

    470 - 590

    17

    -

    -

    HX460LAD+Z

    460 - 560

    -

    500 - 640

    15

    -

    -

    HX500LAD+Z

    500 - 620

    -

    530 - 690

    13

    -

    -

    1. Not in EN 10346:2015. Tata Steel’s own specification.
    2. Lower yield strength or 0.2% proof stress applies.
    For galvannealed grades (ZF) the minimum elongation before fracture is lowered by 2%.
    For galvannealed grades (ZF) the minimum r90-value is lowered by 0.2.
    BH2 refers to the increase of 0.2% proof stress after heating (bake hardening). Not applicable for hot rolled substrate.
    The values of the yield strength are: those of the 0.2% yield strength for products with no definite yield point; the lower yield strength ReL for the other products.

    Phosphorus-alloyed steels

     

    Yield strength 2
    ReL

    Tensile strength
    Rm

    Min. elongation after fracture A

    Min.
    r-value
    r90

    Min. n-value
    n90

     

    N/mm2

    N/mm2

    %

     

     

    HX220PD+Z/+ZF 1

    220 - 280

    340 - 400

    32

    1.3

    0.150

    HX260PD+Z/+ZF 1

    260 - 320

    380 - 440

    28

    -

    -

    HX300PD+Z/+ZF 1

    300 - 360

    400 - 480

    26

    -

    -

    1. Not in EN 10346:2015. Tata Steel’s own specification.
    2. Lower yield strength or 0.2% proof stress applies.
    For galvannealed grades (ZF) the minimum elongation before fracture is lowered by 2%.
    For galvannealed grades (ZF) the minimum r90-value is lowered by 0.2.
    Phosphorus-alloyed steels are currently not available with MagiZinc® coatings.

     

    Chemical composition

    Tata Steel supplies the following cast analysis with maximum values in weight percentages:

    EN 10346:2015

    C

    Mn

    Si

    P

    S

    Altot

    Ti

    Nb

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

     

    Max.

    Max.

    HX180YD+Z/+ZF

    0.01

    0.70

    0.20

    0.06

    0.025

    ≤ 0.1

    0.12

    0.09

    HX220YD+Z/+ZF

    0.01

    0.90

    0.20

    0.08

    0.025

    ≤ 0.1

    0.12

    0.09

    HX260YD+Z/+ZF

    0.01

    1.30

    0.25

    0.10

    0.025

    ≤ 0.1

    0.12

    0.09

    HX180BD+Z/+ZF

    0.10

    0.70

    0.50

    0.06

    0.025

    ≤ 0.1

    0.12

    0.09

    HX220BD+Z/+ZF

    0.10

    0.70

    0.50

    0.08

    0.025

    ≤ 0.1

    0.12

    0.09

    HX260BD+Z/+ZF

    0.10

    0.80

    0.50

    0.10

    0.025

    ≤ 0.1

    0.12

    0.09

    HX300BD+Z/+ZF

    0.11

    0.80

    0.50

    0.12

    0.025

    ≤ 0.1

    0.12

    0.09

    HX220LAD+Z/+ZF/+ZM 1

    0.10

    0.60

    0.50

    0.03

    0.025

    ≥ 0.015

    -

    -

    HX260LAD+Z/+ZF/+ZM

    0.11

    0.60

    0.50

    0.03

    0.025

    ≥ 0.015

    0.12

    0.09

    HX300LAD+Z/+ZF/+ZM

    0.11

    1.00

    0.50

    0.03

    0.025

    ≤ 0.1

    0.15

    0.09

    HX340LAD+Z/+ZF/+ZM

    0.11

    1.00

    0.50

    0.03

    0.025

    ≥ 0.015

    0.15

    0.09

    HX380LAD+Z/+ZF/+ZM

    0.11

    1.40

    0.50

    0.03

    0.025

    ≥ 0.015

    0.15

    0.09

    HX420LAD+Z/+ZF/+ZM

    0.11

    1.40

    0.50

    0.03

    0.025

    ≥ 0.015

    0.15

    0.09

    HX460LAD+Z

    0.15

    1.70

    0.50

    0.03

    0.025

    ≥ 0.015

    0.15

    0.09

    HX500LAD+Z

    0.15

    1.70

    0.50

    0.03

    0.025

    ≥ 0.015

    0.15

    0.09

    1. Not in EN 10346:2015. Tata Steel’s own specification.

    Phosphorus-alloyed steels

     

    C

    Mn

    Si

    Al

    P

    S

    Ti

    Nb

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Max.

    Max.

    Max.

    HX220PD+Z/+ZF

    0.08

    0.7

    0.5

    0.02

    0.1

    0.025

    -

    -

    HX260PD+Z/+ZF

    0.08

    0.8

    0.5

    0.02

    0.1

    0.025

    -

    -

    HX300PD+Z/+ZF

    0.1

    0.7

    0.5

    0.02

    0.12

    0.025

    -

    -

    Not in EN 10346:2015. Tata Steel’s own specification.

     

     

    back to top

    Dimensions

    Dimensional capability

    Galvanised (+Z) products, for steel produced in the Netherlands.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HX180YD

    HX220YD

    HX260YD

    HX180BD

    HX220BD HX220PD

    HX260BD HX260PD

    HX300BD HX300PD

    0.45 - 0.50

     

    1350

    -

    1320

    1320

    -

    1340

    0.50 - 0.55

    -

    1500

    1500

    1470

    1470

    1480

    1550

    0.55 - 0.60

    -

    1640

    1590

    1600

    1610

    1610

    1620

    0.60 - 0.65

    -

    1760

    1680

    1700

    1720

    1750

    1620

    0.65 - 0.70

    -

    1830

    1710

    1850

    1880

    1770

    1660

    0.70 - 0.75

    -

    1850

    1740

    1930

    1920

    1810

    1680

    0.75 - 0.80

    -

    1880

    1760

    1940

    1960

    1860

    1710

    0.80 - 0.90

    -

    1910

    1780

    1950

    2000

    1890

    1740

    0.90 - 1.00

    -

    1970

    1800

    1960

    2030

    1970

    1780

    1.00 - 1.10

    -

    1970

    1840

    1930

    2030

    1970

    1750

    1.10 - 1.20

    -

    1920

    1850

    1870

    2030

    1920

    1720

    1.20 - 1.30

    -

    1870

    1810

    1840

    1980

    1880

    1690

    1.30 - 1.40

    -

    1820

    1770

    1800

    1900

    1800

    1660

    1.40 - 1.50

    -

    1720

    1680

    1770

    1840

    1730

    1610

    1.50 - 1.60

    -

    1640

    1600

    1730

    1760

    1650

    1570

    1.60 - 1.70

    -

    1570

    1510

    1680

    1670

    1570

    1510

    1.70 - 1.75

    -

    1500

    1470

    1630

    1610

    1520

    1480

    1.75 - 1.80

    -

    1460

    1430

    1580

    1560

    1480

    1460

    1.80 - 1.90

    -

    1390

    1370

    1500

    1480

    1410

    1390

    1.90 - 2.00

    -

    1330

    1360

    1430

    1410

    1340

    1320

    2.00 - 2.10

    -

    -

    -

    -

    -

    -

    1260

    The minimum width is 900 mm.
    Widths under 900 mm are available on request. Please contact us.
    Please contact us on the availability of:

    • widths exceeding 1850 mm;
    • surface quality C with a thickness greater than 1.2 mm;
    • galvannealed (+ZF) high-strength grades.

    Serica® premium surface quality availability can be found in our dedicated Serica® page.

     

    Galvanised (+Z) products, for steel produced in the Netherlands.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HX220
    LAD

    HX260
    LAD

    HX300
    LAD

    HX340
    LAD

    HX380
    LAD

    HX420
    LAD

    HX460
    LAD

    HX500
    LAD

    0.35 - 0.40

    1370

    -

    -

    -

    -

    -

    -

    -

    0.40 - 0.45

    1520

    -

    -

    -

    -

    -

    -

    -

    0.45 - 0.50

    1520

    1520

    1460

    1280

    1390

    1240

    -

    -

    0.50 - 0.55

    1520

    1520

    1530

    1350

    1450

    1300

    -

    -

    0.55 - 0.60

    1580

    1580

    1640

    1430

    1480

    1360

    -

    -

    0.60 - 0.65

    1720

    1720

    1740

    1510

    1510

    1420

    -

    -

    0.65 - 0.70

    1780

    1780

    1760

    1600

    1550

    1470

    -

    -

    0.70 - 0.75

    1800

    1800

    1780

    1700

    1580

    1520

    -

    -

    0.75 - 0.90

    1830

    1850

    1800

    1710

    1600

    1570

    -

    -

    0.90 - 1.00

    1870

    1900

    1860

    1740

    1620

    1620

    -

    -

    1.00 - 1.10

    1930

    1940

    1890

    1760

    1620

    1600

    -

    -

    1.10 - 1.20

    1970

    1980

    1930

    1780

    1630

    1580

    -

    -

    1.20 - 1.25

    2010

    2010

    1970

    1810

    1630

    1570

    -

    -

    1.25 - 1.30

    2010

    2010

    1980

    1810

    1640

    1570

    -

    -

    1.30 - 1.40

    2010

    2000

    1980

    1800

    1640

    1570

    -

    -

    1.40 - 1.50

    2010

    1960

    1930

    1770

    1590

    1570

    -

    -

    1.50 - 1.60

    2010

    1930

    1900

    1740

    1550

    1570

    -

    -

    1.60 - 1.70

    2010

    1880

    1550

    1710

    1530

    1280

    1520

    -

    1.70 - 1.80

    2010

    1820

    1550

    1550

    1530

    1280

    1520

    -

    1.80 - 1.90

    1920

    1390

    1550

    1550

    1530

    1350

    1520

    1130

    1.90 - 2.00

    1920

    1550

    1550

    1550

    1530

    1430

    1520

    1200

    2.00 - 2.10

    1550

    1550

    1550

    1550

    1530

    1560

    1520

    1200

    2.10 - 2.20

    1550

    1550

    1550

    1550

    1530

    1560

    1520

    1330

    2.20 - 2.30

    1540

    1540

    1550

    1550

    1530

    1550

    1520

    1330

    2.30 - 2.50

    1540

    1540

    1550

    1550

    1530

    1550

    1540

    1450

    2.50 - 3.00

    1540

    1540

    1550

    1550

    1530

    1550

    1540

    1540

    3.00 - 3.30

    1540

    1540

    1540

    1540

    1530

    1550

    *

    -

    3.30 - 3.50

    1540

    1540 1540 1540 1500 1530 -

    -

    3.50 - 3.60

    1450

    1450

    1450

    1450

    1470

    1490

    -

    -

    3.60 - 3.70

    1430

    1430

    1430

    1430

    1450

    1440

    -

    -

    3.70 - 3.85

    1400

    1400

    1400

    1400

    1400

    1390

    -

    -

    3.85 - 4.00

    1350

    1350

    1350

    1350

    1350

    1350

    -

    -

    The minimum width is 1000 mm for HX460LAD and HX500LAD.
    The minimum width is 900 mm for all other grades.
    Widths under 900 mm are available on request. Please contact us.
    Please contact us on the availability of:

    • widths exceeding 1850 mm
    • dimensions marked '*' 
    • surface quality C with a thickness greater than 1.2 mm

    For the dimensions of galvannealed (+ZF) high-strength grades, please contact us for details. 

     

    Galvanised (+Z) products, for steel produced in the UK.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HX220YD

    HX180YD

    HX260YD

    HX180BD

    HX220BD

    HX260BD

    HX300BD

    0.55 - 0.60

    -

    1524

     -

     -

     -

    0.60 - 0.65

    -

    1570 

    1600 

    1464 

     -

    0.65 - 0.70

    1270

    -

    1630 

    1600 

    1464 

     -

    0.70 - 0.75

    1445

    -

    1670 

    1705 

    1464 

     -

    0.75 - 0.80

    1467

    -

    1670 

    1705 

    1464 

     -

    0.80 - 0.90

    1482

    -

    1670 

    1705 

    1464 

     -

    0.90 - 0.95

    1482  - 1670  1705  1464  1400

    0.95 - 1.00

    1482

    -

    1650 

    1705 

    1464 

    1400 

    1.00 - 1.10

    1482

    -

    1650 

    1705 

    1464 

    1400 

    1.10 - 1.15

    1482  - 1650  1705  1464  1400 

    1.15 - 1.20

    1482

    -

    1650 

    1705 

    1464

    1530 

    1.20 - 1.30

    1630

    -

    1650 

    1705 

    1464 

    1530

    1.30 - 1.40

    1630

    -

    1650 

    1705 

    1464 

    1530 

    1.40 - 1.50

    1630

    -

    1650 

    1705 

    1464 

    1530 

    1.50 - 1.65

    1620

    -

    1630 

    1600

    1464 

    1530 

    1.65 - 1.70

    1620

    -

    1375 

    1600 

    1464 

    1530 

    1.70 - 1.75

    1620

    -

    1375 

    1600 

    1464 

    1530 

    1.75 - 1.80

    1620

    -

    1375 

    1600 

    1464 

    1530 

    1.80 - 1.90

    1620

    -

    1375 

    1600 

    1464 

    1530 

    1.90 - 2.00

    1620

    -

    1375

    1600

    1464

    1472

     The minimum width is 900mm.

    For the dimensions of galvannealed (+ZF) high-strength grades, please contact us for details.
    Serica® premium surface quality availability can be found in our dedicated Serica® page.

    Galvanised (+Z) products, for steel produced in the UK.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HX220LAD

    HX260LAD

    HX300LAD

    HX340LAD

    HX380LAD

    HX420LAD

    0.40 - 0.55 1375 - - - -  

    0.55 - 0.58

    1500

    -

     

    0.58 - 0.60

    1500

    -

    -

    1347

    -

    -

    0.60 - 0.65

    1525

    1520

    -

    1347

    -

    -

    0.65 - 0.70

    1650

    1520

    -

    1520

    -

    -

    0.70 - 0.75

    1750

    1650

    -

    1520

    -

    -

    0.75 - 0.80

    1750

    1800

    -

    1520

    -

    -

    0.80 - 0.90

    1800

    1800

    -

    1520

    1342

    -

    0.90 - 1.00

    1830

    1800

    1400

    1520

    1342

    -

    1.00 - 1.10

    1830

    1800

    1400

    1520

    1342

    -

    1.10 - 1.15

    1830

    1800

    1400

    1520

    1342

    -

    1.15 - 1.20

    1830

    1800

    1530

    1520

    1342

    -

    1.20 - 1.25

    1830

    1800

    1530

    1520

    1342

    1500

    1.25 - 1.30

    1830

    1800

    1530

    1520

    1342

    1500

    1.30 - 1.35

    1830

    1800

    1530 1520 1342  1500

    1.35 - 1.40

    1830

    1749

    1530

    1520

    1342

    1500

    1.40 - 1.50

    1830

    1749

    1530

    1520

    1342

    1500

    1.50 - 1.60

    1750

    1650

    1530

    1520

    1500

    1500

    1.60 - 1.70

    1650

    1550

    1530

    1520

    1500

    1500

    1.70 - 1.80

    1560

    1550

    1530

    1520

    1500

    1500

    1.80 - 1.90

    1500

    1550

    1530

    1520

    1500

    -

    1.90 - 2.00

    1500

    1550

    1472

    1520

    -

    -

    2.00 - 2.10

    -

    1400

    - -  

    The minimum width is 900mm.
    For the dimensions of galvannealed (+ZF) high-strength grades, please contact us for details.

    MagiZinc (+ZM) products.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HX220LAD

    HX260LAD

    HX300LAD

    HX340LAD

    HX380LAD

    HX420LAD

    0.40 - 0.45

    1520

    1520

    1270

    -

    -

    -

    0.45 - 0.50

    1520

    1520

    1370

    -

    -

    -

    0.50 - 0.55

    1520

    1520

    1520

    -

    -

    -

    0.55 - 0.60

    1550

    1550

    1520

    -

    -

    -

    0.60 - 0.65

    1550

    1550

    1520

    1520

    1420

    -

    0.65 - 0.70

    1550

    1550

    1550

    1520

    1420

    -

    0.70 - 0.75

    1550

    1550

    1550

    1520

    1520

    1420

    0.75 - 1.60

    1550

    1550

    1550

    1520

    1520

    1520

    1.60 - 1.70

    1550

    1550

    1400

    1520

    1150

    1040

    1.70 - 1.80

    1550

    1550

    1400

    1520

    1250

    1140

    1.80 - 1.90

    1550

    1550

    1550

    1430

    1320

    1220

    1.90 - 2.00

    1550

    1550

    1550

    1430

    1320

    1220

    The minimum width is 900mm.
    For the dimensions of galvannealed (+ZF) high-strength grades, please contact us.

    Tolerances

    Tolerances comply with standard EN 10143: 2006 (click here).

    Tighter tolerances are available on request.

     

    back to top

    Overview

    Overview

     

    Applications

    Automotive components
    Tubes

     

    Relationship with standards

    European standard

    National standards

    EN 10346:2015

    Germany

    Phosphorus alloyed interstitial-free

     

    HX180YD+Z

     

    HX220YD+Z/+ZF

     

    HX260YD+Z/+ZF

     

    Bake-hardening

     

    HX180BD+Z/+ZF

     

    HX220BD+Z/+ZF

     

    HX260BD+Z/+ZF

     

    HX300BD+Z/+ZF

     

    Phosphorus-alloyed

    SEW 094

    HX220PD+Z/+ZF 1

    ZStE220P

    HX260PD+Z/+ZF 1

    ZStE260P

    HX300PD+Z/+ZF 1

    ZStE300P

    Micro-alloyed

    SEW 093

    HX220LAD+Z/+ZF/+ZM 1

    -

    HX260LAD+Z/+ZF/+ZM

    ZStE260

    HX300LAD+Z/+ZF/+ZM

    ZStE300

    HX340LAD+Z/+ZF/+ZM

    ZStE340

    HX380LAD+Z/+ZF/+ZM

    ZStE380

    HX420LAD+Z/+ZF/+ZM

    ZStE420

    HX460LAD+Z

    -

    HX500LAD+Z

    -

    1. Not in EN 10346:2015. Tata Steel’s own specification.

     

     

    back to top

    Properties

    Properties

    Mechanical properties

    Metallic coated high-strength steel grades have the following mechanical properties (skin-passed) - these are measured transverse to the rolling direction:

    European
    standard
    EN 10346:2015

    Yield
    strength 2
    ReL

    Min.
    BH2

    Tensile strength
    Rm

    Min.
    elongation after
    fracture A

    Min. r-value

    r90

    Min. n-value

    n90

    Grade

    N/mm2

    N/mm2

    N/mm2

    %

     

     

    HX180YD+Z/+ZF

    180 - 240

    -

    330 - 390

    34

    1.7

    0.18

    HX220YD+Z/+ZF

    220 - 280

    -

    340 - 420

    32

    1.5

    0.17

    HX260YD+Z/+ZF

    260 - 320

    -

    380 - 440

    30

    1.4

    0.16

    HX180BD+Z/+ZF

    180 - 240

    30

    290 - 360

    34

    1.5

    0.16

    HX220BD+Z/+ZF

    220 - 280

    30

    320 - 400

    32

    1.2

    0.15

    HX260BD+Z/+ZF

    260 - 320

    30

    360 - 440

    28

    -

    -

    HX300BD+Z/+ZF

    300 - 360

    30

    400 - 480

    26

    -

    -

    HX220LAD+Z/+ZF/+ZM1

    220 - 300

    -

    320 - 400

    29

    -

    -

    HX260LAD+Z/+ZF/+ZM

    260 - 330

    -

    350 - 430

    26

    -

    -

    HX300LAD+Z/+ZF/+ZM

    300 - 380

    -

    380 - 480

    23

    -

    -

    HX340LAD+Z/+ZF/+ZM

    340 - 420

    -

    410 - 510

    21

    -

    -

    HX380LAD+Z/+ZF/+ZM

    380 - 480

    -

    440 - 560

    19

    -

    -

    HX420LAD+Z/+ZF/+ZM

    420 - 520

    -

    470 - 590

    17

    -

    -

    HX460LAD+Z

    460 - 560

    -

    500 - 640

    15

    -

    -

    HX500LAD+Z

    500 - 620

    -

    530 - 690

    13

    -

    -

    1. Not in EN 10346:2015. Tata Steel’s own specification.
    2. Lower yield strength or 0.2% proof stress applies.
    For galvannealed grades (ZF) the minimum elongation before fracture is lowered by 2%.
    For galvannealed grades (ZF) the minimum r90-value is lowered by 0.2.
    BH2 refers to the increase of 0.2% proof stress after heating (bake hardening). Not applicable for hot rolled substrate.
    The values of the yield strength are: those of the 0.2% yield strength for products with no definite yield point; the lower yield strength ReL for the other products.

    Phosphorus-alloyed steels

     

    Yield strength 2
    ReL

    Tensile strength
    Rm

    Min. elongation after fracture A

    Min.
    r-value
    r90

    Min. n-value
    n90

     

    N/mm2

    N/mm2

    %

     

     

    HX220PD+Z/+ZF 1

    220 - 280

    340 - 400

    32

    1.3

    0.150

    HX260PD+Z/+ZF 1

    260 - 320

    380 - 440

    28

    -

    -

    HX300PD+Z/+ZF 1

    300 - 360

    400 - 480

    26

    -

    -

    1. Not in EN 10346:2015. Tata Steel’s own specification.
    2. Lower yield strength or 0.2% proof stress applies.
    For galvannealed grades (ZF) the minimum elongation before fracture is lowered by 2%.
    For galvannealed grades (ZF) the minimum r90-value is lowered by 0.2.
    Phosphorus-alloyed steels are currently not available with MagiZinc® coatings.

     

    Chemical composition

    Tata Steel supplies the following cast analysis with maximum values in weight percentages:

    EN 10346:2015

    C

    Mn

    Si

    P

    S

    Altot

    Ti

    Nb

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

     

    Max.

    Max.

    HX180YD+Z/+ZF

    0.01

    0.70

    0.20

    0.06

    0.025

    ≤ 0.1

    0.12

    0.09

    HX220YD+Z/+ZF

    0.01

    0.90

    0.20

    0.08

    0.025

    ≤ 0.1

    0.12

    0.09

    HX260YD+Z/+ZF

    0.01

    1.30

    0.25

    0.10

    0.025

    ≤ 0.1

    0.12

    0.09

    HX180BD+Z/+ZF

    0.10

    0.70

    0.50

    0.06

    0.025

    ≤ 0.1

    0.12

    0.09

    HX220BD+Z/+ZF

    0.10

    0.70

    0.50

    0.08

    0.025

    ≤ 0.1

    0.12

    0.09

    HX260BD+Z/+ZF

    0.10

    0.80

    0.50

    0.10

    0.025

    ≤ 0.1

    0.12

    0.09

    HX300BD+Z/+ZF

    0.11

    0.80

    0.50

    0.12

    0.025

    ≤ 0.1

    0.12

    0.09

    HX220LAD+Z/+ZF/+ZM 1

    0.10

    0.60

    0.50

    0.03

    0.025

    ≥ 0.015

    -

    -

    HX260LAD+Z/+ZF/+ZM

    0.11

    0.60

    0.50

    0.03

    0.025

    ≥ 0.015

    0.12

    0.09

    HX300LAD+Z/+ZF/+ZM

    0.11

    1.00

    0.50

    0.03

    0.025

    ≤ 0.1

    0.15

    0.09

    HX340LAD+Z/+ZF/+ZM

    0.11

    1.00

    0.50

    0.03

    0.025

    ≥ 0.015

    0.15

    0.09

    HX380LAD+Z/+ZF/+ZM

    0.11

    1.40

    0.50

    0.03

    0.025

    ≥ 0.015

    0.15

    0.09

    HX420LAD+Z/+ZF/+ZM

    0.11

    1.40

    0.50

    0.03

    0.025

    ≥ 0.015

    0.15

    0.09

    HX460LAD+Z

    0.15

    1.70

    0.50

    0.03

    0.025

    ≥ 0.015

    0.15

    0.09

    HX500LAD+Z

    0.15

    1.70

    0.50

    0.03

    0.025

    ≥ 0.015

    0.15

    0.09

    1. Not in EN 10346:2015. Tata Steel’s own specification.

    Phosphorus-alloyed steels

     

    C

    Mn

    Si

    Al

    P

    S

    Ti

    Nb

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Max.

    Max.

    Max.

    HX220PD+Z/+ZF

    0.08

    0.7

    0.5

    0.02

    0.1

    0.025

    -

    -

    HX260PD+Z/+ZF

    0.08

    0.8

    0.5

    0.02

    0.1

    0.025

    -

    -

    HX300PD+Z/+ZF

    0.1

    0.7

    0.5

    0.02

    0.12

    0.025

    -

    -

    Not in EN 10346:2015. Tata Steel’s own specification.

     

     

    back to top

    Dimensions

    Dimensions

    Dimensional capability

    Galvanised (+Z) products, for steel produced in the Netherlands.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HX180YD

    HX220YD

    HX260YD

    HX180BD

    HX220BD HX220PD

    HX260BD HX260PD

    HX300BD HX300PD

    0.45 - 0.50

     

    1350

    -

    1320

    1320

    -

    1340

    0.50 - 0.55

    -

    1500

    1500

    1470

    1470

    1480

    1550

    0.55 - 0.60

    -

    1640

    1590

    1600

    1610

    1610

    1620

    0.60 - 0.65

    -

    1760

    1680

    1700

    1720

    1750

    1620

    0.65 - 0.70

    -

    1830

    1710

    1850

    1880

    1770

    1660

    0.70 - 0.75

    -

    1850

    1740

    1930

    1920

    1810

    1680

    0.75 - 0.80

    -

    1880

    1760

    1940

    1960

    1860

    1710

    0.80 - 0.90

    -

    1910

    1780

    1950

    2000

    1890

    1740

    0.90 - 1.00

    -

    1970

    1800

    1960

    2030

    1970

    1780

    1.00 - 1.10

    -

    1970

    1840

    1930

    2030

    1970

    1750

    1.10 - 1.20

    -

    1920

    1850

    1870

    2030

    1920

    1720

    1.20 - 1.30

    -

    1870

    1810

    1840

    1980

    1880

    1690

    1.30 - 1.40

    -

    1820

    1770

    1800

    1900

    1800

    1660

    1.40 - 1.50

    -

    1720

    1680

    1770

    1840

    1730

    1610

    1.50 - 1.60

    -

    1640

    1600

    1730

    1760

    1650

    1570

    1.60 - 1.70

    -

    1570

    1510

    1680

    1670

    1570

    1510

    1.70 - 1.75

    -

    1500

    1470

    1630

    1610

    1520

    1480

    1.75 - 1.80

    -

    1460

    1430

    1580

    1560

    1480

    1460

    1.80 - 1.90

    -

    1390

    1370

    1500

    1480

    1410

    1390

    1.90 - 2.00

    -

    1330

    1360

    1430

    1410

    1340

    1320

    2.00 - 2.10

    -

    -

    -

    -

    -

    -

    1260

    The minimum width is 900 mm.
    Widths under 900 mm are available on request. Please contact us.
    Please contact us on the availability of:

    • widths exceeding 1850 mm;
    • surface quality C with a thickness greater than 1.2 mm;
    • galvannealed (+ZF) high-strength grades.

    Serica® premium surface quality availability can be found in our dedicated Serica® page.

     

    Galvanised (+Z) products, for steel produced in the Netherlands.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HX220
    LAD

    HX260
    LAD

    HX300
    LAD

    HX340
    LAD

    HX380
    LAD

    HX420
    LAD

    HX460
    LAD

    HX500
    LAD

    0.35 - 0.40

    1370

    -

    -

    -

    -

    -

    -

    -

    0.40 - 0.45

    1520

    -

    -

    -

    -

    -

    -

    -

    0.45 - 0.50

    1520

    1520

    1460

    1280

    1390

    1240

    -

    -

    0.50 - 0.55

    1520

    1520

    1530

    1350

    1450

    1300

    -

    -

    0.55 - 0.60

    1580

    1580

    1640

    1430

    1480

    1360

    -

    -

    0.60 - 0.65

    1720

    1720

    1740

    1510

    1510

    1420

    -

    -

    0.65 - 0.70

    1780

    1780

    1760

    1600

    1550

    1470

    -

    -

    0.70 - 0.75

    1800

    1800

    1780

    1700

    1580

    1520

    -

    -

    0.75 - 0.90

    1830

    1850

    1800

    1710

    1600

    1570

    -

    -

    0.90 - 1.00

    1870

    1900

    1860

    1740

    1620

    1620

    -

    -

    1.00 - 1.10

    1930

    1940

    1890

    1760

    1620

    1600

    -

    -

    1.10 - 1.20

    1970

    1980

    1930

    1780

    1630

    1580

    -

    -

    1.20 - 1.25

    2010

    2010

    1970

    1810

    1630

    1570

    -

    -

    1.25 - 1.30

    2010

    2010

    1980

    1810

    1640

    1570

    -

    -

    1.30 - 1.40

    2010

    2000

    1980

    1800

    1640

    1570

    -

    -

    1.40 - 1.50

    2010

    1960

    1930

    1770

    1590

    1570

    -

    -

    1.50 - 1.60

    2010

    1930

    1900

    1740

    1550

    1570

    -

    -

    1.60 - 1.70

    2010

    1880

    1550

    1710

    1530

    1280

    1520

    -

    1.70 - 1.80

    2010

    1820

    1550

    1550

    1530

    1280

    1520

    -

    1.80 - 1.90

    1920

    1390

    1550

    1550

    1530

    1350

    1520

    1130

    1.90 - 2.00

    1920

    1550

    1550

    1550

    1530

    1430

    1520

    1200

    2.00 - 2.10

    1550

    1550

    1550

    1550

    1530

    1560

    1520

    1200

    2.10 - 2.20

    1550

    1550

    1550

    1550

    1530

    1560

    1520

    1330

    2.20 - 2.30

    1540

    1540

    1550

    1550

    1530

    1550

    1520

    1330

    2.30 - 2.50

    1540

    1540

    1550

    1550

    1530

    1550

    1540

    1450

    2.50 - 3.00

    1540

    1540

    1550

    1550

    1530

    1550

    1540

    1540

    3.00 - 3.30

    1540

    1540

    1540

    1540

    1530

    1550

    *

    -

    3.30 - 3.50

    1540

    1540 1540 1540 1500 1530 -

    -

    3.50 - 3.60

    1450

    1450

    1450

    1450

    1470

    1490

    -

    -

    3.60 - 3.70

    1430

    1430

    1430

    1430

    1450

    1440

    -

    -

    3.70 - 3.85

    1400

    1400

    1400

    1400

    1400

    1390

    -

    -

    3.85 - 4.00

    1350

    1350

    1350

    1350

    1350

    1350

    -

    -

    The minimum width is 1000 mm for HX460LAD and HX500LAD.
    The minimum width is 900 mm for all other grades.
    Widths under 900 mm are available on request. Please contact us.
    Please contact us on the availability of:

    • widths exceeding 1850 mm
    • dimensions marked '*' 
    • surface quality C with a thickness greater than 1.2 mm

    For the dimensions of galvannealed (+ZF) high-strength grades, please contact us for details. 

     

    Galvanised (+Z) products, for steel produced in the UK.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HX220YD

    HX180YD

    HX260YD

    HX180BD

    HX220BD

    HX260BD

    HX300BD

    0.55 - 0.60

    -

    1524

     -

     -

     -

    0.60 - 0.65

    -

    1570 

    1600 

    1464 

     -

    0.65 - 0.70

    1270

    -

    1630 

    1600 

    1464 

     -

    0.70 - 0.75

    1445

    -

    1670 

    1705 

    1464 

     -

    0.75 - 0.80

    1467

    -

    1670 

    1705 

    1464 

     -

    0.80 - 0.90

    1482

    -

    1670 

    1705 

    1464 

     -

    0.90 - 0.95

    1482  - 1670  1705  1464  1400

    0.95 - 1.00

    1482

    -

    1650 

    1705 

    1464 

    1400 

    1.00 - 1.10

    1482

    -

    1650 

    1705 

    1464 

    1400 

    1.10 - 1.15

    1482  - 1650  1705  1464  1400 

    1.15 - 1.20

    1482

    -

    1650 

    1705 

    1464

    1530 

    1.20 - 1.30

    1630

    -

    1650 

    1705 

    1464 

    1530

    1.30 - 1.40

    1630

    -

    1650 

    1705 

    1464 

    1530 

    1.40 - 1.50

    1630

    -

    1650 

    1705 

    1464 

    1530 

    1.50 - 1.65

    1620

    -

    1630 

    1600

    1464 

    1530 

    1.65 - 1.70

    1620

    -

    1375 

    1600 

    1464 

    1530 

    1.70 - 1.75

    1620

    -

    1375 

    1600 

    1464 

    1530 

    1.75 - 1.80

    1620

    -

    1375 

    1600 

    1464 

    1530 

    1.80 - 1.90

    1620

    -

    1375 

    1600 

    1464 

    1530 

    1.90 - 2.00

    1620

    -

    1375

    1600

    1464

    1472

     The minimum width is 900mm.

    For the dimensions of galvannealed (+ZF) high-strength grades, please contact us for details.
    Serica® premium surface quality availability can be found in our dedicated Serica® page.

    Galvanised (+Z) products, for steel produced in the UK.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HX220LAD

    HX260LAD

    HX300LAD

    HX340LAD

    HX380LAD

    HX420LAD

    0.40 - 0.55 1375 - - - -  

    0.55 - 0.58

    1500

    -

     

    0.58 - 0.60

    1500

    -

    -

    1347

    -

    -

    0.60 - 0.65

    1525

    1520

    -

    1347

    -

    -

    0.65 - 0.70

    1650

    1520

    -

    1520

    -

    -

    0.70 - 0.75

    1750

    1650

    -

    1520

    -

    -

    0.75 - 0.80

    1750

    1800

    -

    1520

    -

    -

    0.80 - 0.90

    1800

    1800

    -

    1520

    1342

    -

    0.90 - 1.00

    1830

    1800

    1400

    1520

    1342

    -

    1.00 - 1.10

    1830

    1800

    1400

    1520

    1342

    -

    1.10 - 1.15

    1830

    1800

    1400

    1520

    1342

    -

    1.15 - 1.20

    1830

    1800

    1530

    1520

    1342

    -

    1.20 - 1.25

    1830

    1800

    1530

    1520

    1342

    1500

    1.25 - 1.30

    1830

    1800

    1530

    1520

    1342

    1500

    1.30 - 1.35

    1830

    1800

    1530 1520 1342  1500

    1.35 - 1.40

    1830

    1749

    1530

    1520

    1342

    1500

    1.40 - 1.50

    1830

    1749

    1530

    1520

    1342

    1500

    1.50 - 1.60

    1750

    1650

    1530

    1520

    1500

    1500

    1.60 - 1.70

    1650

    1550

    1530

    1520

    1500

    1500

    1.70 - 1.80

    1560

    1550

    1530

    1520

    1500

    1500

    1.80 - 1.90

    1500

    1550

    1530

    1520

    1500

    -

    1.90 - 2.00

    1500

    1550

    1472

    1520

    -

    -

    2.00 - 2.10

    -

    1400

    - -  

    The minimum width is 900mm.
    For the dimensions of galvannealed (+ZF) high-strength grades, please contact us for details.

    MagiZinc (+ZM) products.

    Dimensions in mm.

    Thickness

    Max. width

    From - up to

    HX220LAD

    HX260LAD

    HX300LAD

    HX340LAD

    HX380LAD

    HX420LAD

    0.40 - 0.45

    1520

    1520

    1270

    -

    -

    -

    0.45 - 0.50

    1520

    1520

    1370

    -

    -

    -

    0.50 - 0.55

    1520

    1520

    1520

    -

    -

    -

    0.55 - 0.60

    1550

    1550

    1520

    -

    -

    -

    0.60 - 0.65

    1550

    1550

    1520

    1520

    1420

    -

    0.65 - 0.70

    1550

    1550

    1550

    1520

    1420

    -

    0.70 - 0.75

    1550

    1550

    1550

    1520

    1520

    1420

    0.75 - 1.60

    1550

    1550

    1550

    1520

    1520

    1520

    1.60 - 1.70

    1550

    1550

    1400

    1520

    1150

    1040

    1.70 - 1.80

    1550

    1550

    1400

    1520

    1250

    1140

    1.80 - 1.90

    1550

    1550

    1550

    1430

    1320

    1220

    1.90 - 2.00

    1550

    1550

    1550

    1430

    1320

    1220

    The minimum width is 900mm.
    For the dimensions of galvannealed (+ZF) high-strength grades, please contact us.

    Tolerances

    Tolerances comply with standard EN 10143: 2006 (click here).

    Tighter tolerances are available on request.

     

    back to top