Skip navigation

Research papers

This section contains a selection of abstracts of papers published by RD&T employees.

Further information about the subject matter presented in the papers can be obtained from the conference organisers, the publishers quoted or through your nearest university library.

 

Evaluation of geometrically necessary dislocations density (GNDD) near phase boundaries in dual phase steels by means of EBSD

17 Dec 2011

Jaap Moerman, Patricia Romano Triguero, Peter van Liempt; Tata Steel RD&T, IJmuiden Cem Tasan; Materials Innovation Institute, M2i, Delft

Recrystallization texture of ferrite steels: beyond the gamma-fibre

17 Dec 2011

Carla Barbatti, Jaap Moerman; Tata Steel RD&T, IJmuiden, The Netherlands P. Gobernado; Materials Innovation Institute, M2i, Delft, The Netherlands L.A.I. Kestens; Delft University of Technology, The Netherlands R.H. Petrov; Ghent University, Belgium

Texture evolution during cold rolling and annealing in dual phase steels

17 Dec 2011

Carla Barbatti, Jaap Moerman; Tata Steel RD&T, IJmuiden, The Netherlands J. Gautam, Materials Innovation Institute, M2i, Delft, The Netherlands L.A.I. Kestens, A.G. Miroux; Delft University of Technology, The Netherlands

Validation of the texture-based ALAMEL and VPSC models by measured anisotropy of plastic yielding

17 Dec 2011

Philip Eyckens, Qingge Xie, Paul van Houtte, Laurent Delannay; Katholieke Universiteit Leuven, Belgium Jaap Moerman, Henk Vegter; Tata Steel RD&T, IJmuiden, The Netherlands Albert van Bael; Limburg Catholic University College, The Netherlands Jurij J. Sidor, Leo Kestens; Ghent University, Belgium

An improved mathematical model to predict the real time transient performance of a large steel reheating furnace : paper of the ASME 2011 IMECE, November 11-17, 2011, Denver, Colorado, USA

17 Nov 2011

Jonathan Broughton, Tata Steel, RD&T Rotherham, UK Joanna Jenkins, John Ward, C.K. Tan, University of Glamorgan, Pontypridd, UK

Effects of dry joints on the compressive behaviour of refractory linings

02 Nov 2011

Kirill Andreev, Sido Sinnema; Tata Steel RD&T IJmuiden, The Netherlands

A revised criterion for the Portevin – Le Chatelier effect based on the Strain Rate Sensitivity of the Work Hardening Rate

13 Oct 2011

P. van Liempt; Tata Steel RD&T IJmuiden, The Netherlands J. Sietsma; Dept. Materials Science and Engineering, Delft, The Netherlands

Investigations into parameters influencing plume visibility at UK sinter plants

07 Oct 2011

D. Poole, E. Aries, S. Johnston, D.R. Anderson, N. Schofield, A. Horne; Tata Steel RD&T Swinden Technology Centre, United Kingdom D. Hemfrey; Tata Steel Strip Products UK, Port Talbot, United Kingdom

Detection of Coke Oven Through-Wall Leakage using Data-driven Techniques

28 Sep 2011

M. Saiepour, P. Griffith; Tata Steel RD&T, Swinden Technology Centre, United Kingdom G. Yi, J. Zhang, J. Morris; Newcastle University, United Kingdom P. Warren; Tata Steel Long Products, Scunthorpe, United Kingdom

A New Approach to Evaluate BOF Phosphorus Refining Performance

09 Sep 2011

Li Zushu, Mariana Adderley; Tata Steel RD&T Swinden Technology Centre, United Kingdom James Morgan, Keith Bain, Johan van Boggelen; Tata Steel RD&T Teesside Technology Centre, United Kingdom

A Study of Refining Performance in a BOS Converter

09 Sep 2011

M.S. Millman; Tata Steel RD&T Teesside Technology Centre, United Kingdom A. Overbosch, A Kapilashrami; Tata Steel RD&T IJmuiden, The Netherlands D. Malmberg; Swerea MEFOS, Sweden M. Brämming; SSAB Tunnplat AB, Sweden

Continuous improvement of hot metal desulphurisation at BOS No.2 IJmuiden Tata Steel

09 Sep 2011

Hessel-Jan Visser, Fokke Zwaan, Manuel Atienzo, Coen van Kralingen, Jan Brockhoff, Pieter Broersen; Tata Steel BOS No.2, IJmuiden, The Netherlands

Optimal Feedforward Filter Design for Flying Gauge Changes of a Continuous Cold Mill

02 Sep 2011

Camile WJ Hol, Marc de Boer, Vincent Beentjes; Tata Steel RD&T IJmuiden, The Netherlands Mike Price; Tata Steel Port Talbot Works, Wales Steven Sujoto; Accenture, Amsterdam, The Netherlands Carsten W. Scherer; SRC SimTech Chair Mathematical Systems Theory, University of Stuttgart, Germany Anton A.J. van der Weiden; Delft University of Technology, Delft, The Netherlands

CLEAR - An LCA model for Construction

31 Aug 2011

Allan Griffin, Iain Millar, Nick Avery, Nick Coleman, Peter Hodgson; Tata Steel RD&T Swinden Technology Centre, United Kingdom

Modelling stochastic forming behaviour in deep drawing steels

26 Aug 2011

Eisso Atzema, Michael Abspoel, Marc Scholting; Tata Steel RD&T IJmuiden, The Netherlands

Carbonation of Steel Slag II -SEM-EDS MICROANALYSIS USING PARC

19 Aug 2011

Sieger R. van der Laan, Christian Liebske; Tata Steel RD&T Ceramics Research Centre, IJmuiden, The Netherlands Hans Kobesen; Tata Steel Europe, OSF2, IJmuiden, The Netherlands Eleanor J. Berryman, Anthony E. Williams-Jones, Artasches A. Migdisov; McGill University, Canada.

Microstructure, Mechanical Properties and Formability of a Duplex Steel

05 Aug 2011

Radhakanta Rana, Jenny Loiseaux, Chris Lahaye; Tata Steel RD&T IJmuiden Technology Centre, The Netherlands

ORIENTATION GRADIENTS IN a-FIBRE GRAINS OF COLD ROLLED IF STEELS

05 Aug 2011

J. Moerman, C. Barbatti; Tata Steel RD&T IJmuiden Technology Centre, The Netherlands P. Gobernado, R.H. Petrov, L.A.I. Kestens; Delft University, Delft, The Netherlands

Progress and Issues in Thermomechanical Simulation: Experience in Tata Steel (Europe)

05 Aug 2011

Andy Howe, Sally Parker, Roger Beaverstock; Tata Steel RD&T Swinden Technology Centre, United Kingdom Willem-Maarten van Haaften; Tata Steel RD&T IJmuiden Technology Centre, The Netherlands

Static Softening Behaviour in High Aluminum Steels

05 Aug 2011

S.V. Parker; Tata Steel RD&T Swinden Technology Centre, United Kingdom Z. Aretxabaleta, B. Pereda, B. Lopez; CEIT and TECNUN, Spain

 

My Order