• Choose Language
  • Automotive - Metallic coated - High-strength steel

    Our range of metallic coated high-strength steels includes micro alloyed, interstitial-free and bake hardening grades.

    Ideal for applications requiring high strength and good formability. Due to their single-phase microstructures, properties are very consistent. This results in reliable production processes.

    • Excellent paint finish

      Steels with the new Serica surface finish enable a consistently excellent paint finish, even when thinner or fewer paint layers are used. Combined with the cost-effective process of hot-dip coating, Serica offers you significant total cost of ownership benefits.

    • MagiZinc Auto - Advanced hot dip zinc coating

      MagiZinc®Auto delivers twice the level of corrosion protection offered by conventional zinc coatings - creating scope for weight reduction and increased yield.

      Less prone to zinc-flaking, MagiZinc Auto reduces tool pollution by 25% for improvements of up to 30% in press shop uptime.

    Contact us

    Tata Steel

    Automotive

    PO Box 10.000, Dudokhuis

    1970 CA IJmuiden

    The Netherlands

    T +31 (0) 251 495748

    Overview

     

    Applications

    Our high-strength steels are used for both:

    • interior (unexposed) parts
    • exterior (exposed) parts

    Microalloyed (HSLA) steels are used solely for structural reinforcements, crash absorption components and brackets. Applications include

    • front longitudinal
    • roof cross beams
    • floor panels

    Phosphorus alloyed interstitial-free steels and bake hardening steels are used mainly for exposed body panels that require good formability in combination with high strength for dent resistance. Applications include:

    • hoods
    • roofs
    • doors

     

    Relationship with standards

      VDA standard European standard National standards
    Grade VDA 239-100 EN 10346:2015 Germany
    Phosphorus alloyed interstitial-free    
    CR IF180-GI/GA/ZM CR180IF-GI/ZM HX180YD+Z -
    CR IF220-GI/GA/ZM CR210IF-GI/GA/ZM HX220YD+Z/+ZF -
    CR IF260-GI/GA/ZM CR240IF-GI/GA/ZM HX260YD+Z/+ZF -
    Bake hardening    
    CR BH180-GI/GA/ZM CR180BH-GI/GA/ZM HX180BD+Z/+ZF -
    CR BH220-GI/GA/ZM CR210BH-GI/GA/ZM HX220BD+Z/+ZF -
    CR BH260-GI/GA/ZM CR240BH-GI/GA/ZM HX260BD+Z/+ZF -
    CR BH300-GI/GA/ZM CR270BH-GI/GA/ZM HX300BD+Z/+ZF -
    Phosphorus alloyed   SEW 094
    CR P220-GI/GA/ZM - HX220PD+Z/+ZF 1 ZStE220P
    CR P260-GI/GA/ZM - HX260PD+Z/+ZF 1 ZStE260P
    CR P300-GI/GA/ZM - HX300PD+Z/+ZF 1 ZStE300P
    Microalloyed     SEW 093
    CR HSLA220-GI/GA/ZM CR210LA-GI/GA/ZM HX220LAD+Z/+ZF/+ZM 1 -
    CR HSLA260-GI/GA/ZM CR240LA-GI/GA/ZM HX260LAD+Z/+ZF/+ZM ZStE260
    CR HSLA300-GI/GA/ZM CR270LA-GI/GA/ZM HX300LAD+Z/+ZF/+ZM ZStE300
    CR HSLA340-GI/GA/ZM CR300LA-GI/GA/ZM HX340LAD+Z/+ZF/+ZM ZStE340
    CR HSLA380-GI/GA/ZM CR340LA-GI/GA/ZM HX380LAD+Z/+ZF/+ZM ZStE380
    CR HSLA420-GI/GA/ZM CR380LA-GI/GA/ZM HX420LAD+Z/+ZF/+ZM ZStE420
    CR HSLA460-GI CR420LA-GI/ZM HX460LAD+Z/+ZM -
    CR HSLA500-GI/ZM CR460LA-GI HX500LAD+Z -

    1. Not in EN 10346. Tata Steel’s own specification.

     

     

    back to top

    Properties

     

    Mechanical properties

    Metallic coated high-strength steel grades have the following mechanical properties (skin-passed) - these are measured transverse to the rolling direction. Property range is indicated according to EN 10346, but properties meet equivalent VDA 239-100 specifications also.

      Coating Yield strength 1 Min. Tensile strength Min. elongation after fracture Min. r-value Min. n-value
    Grade type ReL BH2 Rm A  r90  n90
        N/mm2 N/mm2 N/mm2 %    
    CR IF180 GI/ZM 180 - 240 - 330 - 390 34 1.7 0.18
    CR IF220 GI/GA/ZM 220 - 280 - 340 - 420 32 1.5 0.17
    CR IF260 GI/GA/ZM 260 - 320 - 380 - 440 30 1.4 0.16
    CR BH180 GI/GA/ZM 180 - 240 35 290 - 360 34 1.5 0.16
    CR BH220 GI/GA/ZM 220 - 280 35 320 - 400 32 1.2 0.15
    CR BH260 GI/GA/ZM 260 - 320 35 360 - 440 28 - -
    CR BH300 GI/GA/ZM 300 - 360 35 400 - 480 26 - -
    CR HSLA220 GI/GA/ZM 220 - 300 - 320 - 400 29 - -
    CR HSLA260 GI/GA/ZM 260 - 330 - 350 - 430 26 - -
    CR HSLA300 GI/GA/ZM 300 - 380 - 380 - 480 23 - -
    CR HSLA340 GI/GA/ZM 340 - 420 - 410 - 510 21 - -
    CR HSLA380 GI/GA/ZM 380 - 480 - 440 - 560 19 - -
    CR HSLA420 GI/GA/ZM 420 - 520 - 470 - 590 17 - -
    CR HSLA460 GI/ZM 460 - 560 - 500 - 640 15 - -
    CR HSLA500 GI 500 - 620 - 530 - 690 13 - -

    1. Lower yield strength or 0.2% proof stress applies.
    For galvannealed grades (GA) the minimum elongation before fracture is lowered by 2%.
    For galvannealed grades (GA) the minimum r90-value is lowered by 0.2.
    BH2 refers to the increase of 0.2% proof stress after heating (bake hardening). Not applicable for hot rolled substrate.
    The values of the yield strength are: those of the 0.2% yield strength for products with no definite yield point; the lower yield strength ReL for the other products.

    Phosphorus alloyed steels

      Coating type Yield strength1 Tensile strength Min. elongation after fracture Min. r-value Min. n-value
    Grade   ReL Rm A r90 n90
        N/mm2 N/mm2 %    
    CR P220 GI/GA 220 - 280 340 - 400 32 1.3 0.15
    CR P260 GI/GA 260 - 320 380 - 440 28 - -
    CR P300 GI/GA 300 - 360 400 - 480 26 - -

    1. Lower yield strength or 0.2% proof stress applies.
    For galvannealed grades (GA) the minimum elongation before fracture is lowered by 2%.
    For galvannealed grades (GA) the minimum r90-value is lowered by 0.2.
    Phosphorus-alloyed steels are currently not available with MagiZinc coatings.

     

    Chemical composition

    Tata Steel supplies the following cast analysis with maximum values in weight percentages:

      C Mn Si P S Altot Ti Nb
    Grade Max. Max. Max. Max. Max.   Max. Max.
    CR IF180-GI/GA/ZM 0.01 0.7 0.2 0.06 0.025 ≤ 0.1 0.12 0.09
    CR IF220-GI/GA/ZM 0.01 0.9 0.2 0.08 0.025 ≤ 0.1 0.12 0.09
    CR IF260-GI/GA/ZM 0.01 1.3 0.25 0.1 0.025 ≤ 0.1 0.12 0.09
    CR BH180-GI/GA/ZM 0.1 0.7 0.5 0.06 0.025 ≤ 0.1 0.12 0.09
    CR BH220-GI/GA/ZM 0.1 0.7 0.5 0.08 0.025 ≤ 0.1 0.12 0.09
    CR BH260-GI/GA/ZM 0.1 0.8 0.5 0.1 0.025 ≤ 0.1 0.12 0.09
    CR BH300-GI/GA/ZM 0.11 0.8 0.5 0.12 0.025 ≤ 0.1 0.12 0.09
    CR HSLA220-GI/GA/ZM 0.1 0.6 0.5 0.03 0.025 ≥ 0.015 - -
    CR HSLA260-GI/GA/ZM 0.11 0.6 0.5 0.03 0.025 ≥ 0.015 0.12 0.09
    CR HSLA300-GI/GA/ZM 0.11 1 0.5 0.03 0.025 ≤ 0.1 0.15 0.09
    CR HSLA340-GI/GA/ZM 0.11 1 0.5 0.03 0.025 ≥ 0.015 0.15 0.09
    CR HSLA380-GI/GA/ZM 0.11 1.4 0.5 0.03 0.025 ≥ 0.015 0.15 0.09
    CR HSLA420-GI/GA/ZM 0.11 1.4 0.5 0.03 0.025 ≥ 0.015 0.15 0.09
    CR HSLA460-GI 0.15 1.7 0.5 0.03 0.025 ≥ 0.015 0.15 0.09
    CR HSLA500-GI/ZM 0.15 1.7 0.5 0.03 0.025 ≥ 0.015 0.15 0.09

     

    Phosphorus alloyed steels

      C Mn Si Al P S Ti Nb
    Grade Max. Max. Max. Max. Max. Max. Max. Max.
    CR P220-GI/GA/ZM 0.08 0.7 0.5 0.02 0.1 0.025 - -
    CR P260-GI/GA/ZM 0.08 0.8 0.5 0.02 0.1 0.025 - -
    CR P300-GI/GA/ZM 0.1 0.7 0.5 0.02 0.12 0.025 - -

     

    back to top

    Dimensions

     

    Dimensional capability

    Galvanised (GI) and MagiZinc Auto (ZM) products

    Dimensions in mm.

    Abmessungen in mm.

    Thickness Max. width                
    From - to IF180 IF220 IF260 BH180D BH220BD P220 B260 P260 B300 P300
    0.45 - 0.50 - 1350 - 1320 1320 1320 - - 1340 1340
    0.50 - 0.55 - 1500 1500 1470 1470 1470 1480 1480 1550 1550
    0.55 - 0.60 - 1640 1590 1600 1610 1610 1610 1610 1620 1620
    0.60 - 0.65 - 1760 1680 1700 1720 1720 1750 1750 1620 1620
    0.65 - 0.66 1267 1830 1710 1850 1880 1880 1770 1770 1660 1660
    0.66 - 0.70 1267 1830 1710 1850 1880 1880 1770 1770 1694 1660
    0.70 - 0.75 1442 1850 1740 1930 1920 1920 1810 1810 1694 1680
    0.75 - 0.80 1464 1880 1760 1940 1960 1960 1860 1860 1710 1710
    0.80 - 0.90 1536 1910 1780 1950 2000 2000 1890 1890 1740 1740
    0.90 - 1.00 1536 1970 1800 1960 2030 2030 1970 1970 1780 1780
    1.00 - 1.10 1536 1970 1840 1930 2030 2030 1970 1970 1750 1750
    1.10 - 1.15 1536 1920 1850 1870 2030 2030 1920 1920 1720 1720
    1.15 - 1.20 1536 1920 1850 1870 2030 2030 1920 1920 1744 1720
    1.20 - 1.30 1627 1870 1810 1840 1980 1980 1880 1880 1744 1690
    1.30 - 1.40 1627 1820 1770 1800 1900 1900 1800 1800 1744 1660
    1.40 - 1.50 1627 1720 1680 1770 1840 1840 1764 1730 1744 1610
    1.50 - 1.60 1617 1640 1600 1730 1760 1760 1650 1650 1744 1570
    1.60 - 1.65 1617 1570 1510 1680 1714 1670 1570 1570 1744 1510
    1.65 - 1.70 1617 1570 1510 1680 1670 1670 1570 1570 1744 1510
    1.70 - 1.75 1617 1500 1470 1630 1664 1610 1564 1520 1744 1480
    1.75 - 1.80 1617 1460 1430 1580 1664 1560 1564 1480 1744 1460
    1.80 - 1.90 1617 1390 1370 1500 1589 1480 1539 1410 1694 1390
    1.90 - 1.95 1586 1330 1300 1430 1580 1410 1539 1340 1594 1320
    1.95 - 2.00 1586 1330 1300 1430 1539 1410 1539 1340 1594 1320
    2.00 - 2.10 - - - - - - - - 1260 1260

    Die Mindestbreite beträgt 900 mm. 
    Breiten unter 900 mm sind auf Anfrage erhältlich. 
    Bitte kontaktieren Sie uns. Bitte kontaktieren Sie uns über die Verfügbarkeit von: 
    - Oberflächenqualität C mit einer Dicke von mehr als 1,2 mm; 
    - Galvannealed (+ ZF) hochfeste Sorten. 
    - Serica® Premium Oberflächenqualität
     

    Galvanised (GI) and MagiZinc Auto (ZM) products (continued)

    Dimensions in mm. 

    Thickness Max. width          
    From - to HSLA220 HSLA260 HSLA300 HSLA340 HSLA380 HSLA420
    0.40 - 0.45 1520 1520 1270 - - -
    0.45 - 0.50 1520 1520 1370 - - -
    0.50 - 0.55 1520 1520 1520 - - -
    0.55 - 0.60 1550 1550 1520 - - -
    0.60 - 0.65 1550 1550 1520 1520 1420 -
    0.65 - 0.70 1550 1550 1550 1520 1420 -
    0.70 - 0.75 1550 1550 1550 1520 1520 1420
    0.75 - 1.60 1550 1550 1550 1520 1520 1520
    1.60 - 1.70 1550 1550 1400 1520 1150 1040
    1.70 - 1.80 1550 1550 1400 1460 1250 1140
    1.80 - 1.90 1550 1550 1550 1430 1320 1220
    1.90 - 2.00 1550 1550 1550 1430 1320 1220

    The minimum width is 900mm.
    For the dimensions of galvannealed (GA) high-strength grades, please contact us.

     

    Tolerances

    Tolerances comply with standard EN 10143:2006 (click here).
    Tighter tolerances are available on request.

     

    back to top

     

    Overview

    Overview

     

    Applications

    Our high-strength steels are used for both:

    • interior (unexposed) parts
    • exterior (exposed) parts

    Microalloyed (HSLA) steels are used solely for structural reinforcements, crash absorption components and brackets. Applications include

    • front longitudinal
    • roof cross beams
    • floor panels

    Phosphorus alloyed interstitial-free steels and bake hardening steels are used mainly for exposed body panels that require good formability in combination with high strength for dent resistance. Applications include:

    • hoods
    • roofs
    • doors

     

    Relationship with standards

      VDA standard European standard National standards
    Grade VDA 239-100 EN 10346:2015 Germany
    Phosphorus alloyed interstitial-free    
    CR IF180-GI/GA/ZM CR180IF-GI/ZM HX180YD+Z -
    CR IF220-GI/GA/ZM CR210IF-GI/GA/ZM HX220YD+Z/+ZF -
    CR IF260-GI/GA/ZM CR240IF-GI/GA/ZM HX260YD+Z/+ZF -
    Bake hardening    
    CR BH180-GI/GA/ZM CR180BH-GI/GA/ZM HX180BD+Z/+ZF -
    CR BH220-GI/GA/ZM CR210BH-GI/GA/ZM HX220BD+Z/+ZF -
    CR BH260-GI/GA/ZM CR240BH-GI/GA/ZM HX260BD+Z/+ZF -
    CR BH300-GI/GA/ZM CR270BH-GI/GA/ZM HX300BD+Z/+ZF -
    Phosphorus alloyed   SEW 094
    CR P220-GI/GA/ZM - HX220PD+Z/+ZF 1 ZStE220P
    CR P260-GI/GA/ZM - HX260PD+Z/+ZF 1 ZStE260P
    CR P300-GI/GA/ZM - HX300PD+Z/+ZF 1 ZStE300P
    Microalloyed     SEW 093
    CR HSLA220-GI/GA/ZM CR210LA-GI/GA/ZM HX220LAD+Z/+ZF/+ZM 1 -
    CR HSLA260-GI/GA/ZM CR240LA-GI/GA/ZM HX260LAD+Z/+ZF/+ZM ZStE260
    CR HSLA300-GI/GA/ZM CR270LA-GI/GA/ZM HX300LAD+Z/+ZF/+ZM ZStE300
    CR HSLA340-GI/GA/ZM CR300LA-GI/GA/ZM HX340LAD+Z/+ZF/+ZM ZStE340
    CR HSLA380-GI/GA/ZM CR340LA-GI/GA/ZM HX380LAD+Z/+ZF/+ZM ZStE380
    CR HSLA420-GI/GA/ZM CR380LA-GI/GA/ZM HX420LAD+Z/+ZF/+ZM ZStE420
    CR HSLA460-GI CR420LA-GI/ZM HX460LAD+Z/+ZM -
    CR HSLA500-GI/ZM CR460LA-GI HX500LAD+Z -

    1. Not in EN 10346. Tata Steel’s own specification.

     

     

    back to top

    Properties

    Properties

     

    Mechanical properties

    Metallic coated high-strength steel grades have the following mechanical properties (skin-passed) - these are measured transverse to the rolling direction. Property range is indicated according to EN 10346, but properties meet equivalent VDA 239-100 specifications also.

      Coating Yield strength 1 Min. Tensile strength Min. elongation after fracture Min. r-value Min. n-value
    Grade type ReL BH2 Rm A  r90  n90
        N/mm2 N/mm2 N/mm2 %    
    CR IF180 GI/ZM 180 - 240 - 330 - 390 34 1.7 0.18
    CR IF220 GI/GA/ZM 220 - 280 - 340 - 420 32 1.5 0.17
    CR IF260 GI/GA/ZM 260 - 320 - 380 - 440 30 1.4 0.16
    CR BH180 GI/GA/ZM 180 - 240 35 290 - 360 34 1.5 0.16
    CR BH220 GI/GA/ZM 220 - 280 35 320 - 400 32 1.2 0.15
    CR BH260 GI/GA/ZM 260 - 320 35 360 - 440 28 - -
    CR BH300 GI/GA/ZM 300 - 360 35 400 - 480 26 - -
    CR HSLA220 GI/GA/ZM 220 - 300 - 320 - 400 29 - -
    CR HSLA260 GI/GA/ZM 260 - 330 - 350 - 430 26 - -
    CR HSLA300 GI/GA/ZM 300 - 380 - 380 - 480 23 - -
    CR HSLA340 GI/GA/ZM 340 - 420 - 410 - 510 21 - -
    CR HSLA380 GI/GA/ZM 380 - 480 - 440 - 560 19 - -
    CR HSLA420 GI/GA/ZM 420 - 520 - 470 - 590 17 - -
    CR HSLA460 GI/ZM 460 - 560 - 500 - 640 15 - -
    CR HSLA500 GI 500 - 620 - 530 - 690 13 - -

    1. Lower yield strength or 0.2% proof stress applies.
    For galvannealed grades (GA) the minimum elongation before fracture is lowered by 2%.
    For galvannealed grades (GA) the minimum r90-value is lowered by 0.2.
    BH2 refers to the increase of 0.2% proof stress after heating (bake hardening). Not applicable for hot rolled substrate.
    The values of the yield strength are: those of the 0.2% yield strength for products with no definite yield point; the lower yield strength ReL for the other products.

    Phosphorus alloyed steels

      Coating type Yield strength1 Tensile strength Min. elongation after fracture Min. r-value Min. n-value
    Grade   ReL Rm A r90 n90
        N/mm2 N/mm2 %    
    CR P220 GI/GA 220 - 280 340 - 400 32 1.3 0.15
    CR P260 GI/GA 260 - 320 380 - 440 28 - -
    CR P300 GI/GA 300 - 360 400 - 480 26 - -

    1. Lower yield strength or 0.2% proof stress applies.
    For galvannealed grades (GA) the minimum elongation before fracture is lowered by 2%.
    For galvannealed grades (GA) the minimum r90-value is lowered by 0.2.
    Phosphorus-alloyed steels are currently not available with MagiZinc coatings.

     

    Chemical composition

    Tata Steel supplies the following cast analysis with maximum values in weight percentages:

      C Mn Si P S Altot Ti Nb
    Grade Max. Max. Max. Max. Max.   Max. Max.
    CR IF180-GI/GA/ZM 0.01 0.7 0.2 0.06 0.025 ≤ 0.1 0.12 0.09
    CR IF220-GI/GA/ZM 0.01 0.9 0.2 0.08 0.025 ≤ 0.1 0.12 0.09
    CR IF260-GI/GA/ZM 0.01 1.3 0.25 0.1 0.025 ≤ 0.1 0.12 0.09
    CR BH180-GI/GA/ZM 0.1 0.7 0.5 0.06 0.025 ≤ 0.1 0.12 0.09
    CR BH220-GI/GA/ZM 0.1 0.7 0.5 0.08 0.025 ≤ 0.1 0.12 0.09
    CR BH260-GI/GA/ZM 0.1 0.8 0.5 0.1 0.025 ≤ 0.1 0.12 0.09
    CR BH300-GI/GA/ZM 0.11 0.8 0.5 0.12 0.025 ≤ 0.1 0.12 0.09
    CR HSLA220-GI/GA/ZM 0.1 0.6 0.5 0.03 0.025 ≥ 0.015 - -
    CR HSLA260-GI/GA/ZM 0.11 0.6 0.5 0.03 0.025 ≥ 0.015 0.12 0.09
    CR HSLA300-GI/GA/ZM 0.11 1 0.5 0.03 0.025 ≤ 0.1 0.15 0.09
    CR HSLA340-GI/GA/ZM 0.11 1 0.5 0.03 0.025 ≥ 0.015 0.15 0.09
    CR HSLA380-GI/GA/ZM 0.11 1.4 0.5 0.03 0.025 ≥ 0.015 0.15 0.09
    CR HSLA420-GI/GA/ZM 0.11 1.4 0.5 0.03 0.025 ≥ 0.015 0.15 0.09
    CR HSLA460-GI 0.15 1.7 0.5 0.03 0.025 ≥ 0.015 0.15 0.09
    CR HSLA500-GI/ZM 0.15 1.7 0.5 0.03 0.025 ≥ 0.015 0.15 0.09

     

    Phosphorus alloyed steels

      C Mn Si Al P S Ti Nb
    Grade Max. Max. Max. Max. Max. Max. Max. Max.
    CR P220-GI/GA/ZM 0.08 0.7 0.5 0.02 0.1 0.025 - -
    CR P260-GI/GA/ZM 0.08 0.8 0.5 0.02 0.1 0.025 - -
    CR P300-GI/GA/ZM 0.1 0.7 0.5 0.02 0.12 0.025 - -

     

    back to top

    Dimensions

    Dimensions

     

    Dimensional capability

    Galvanised (GI) and MagiZinc Auto (ZM) products

    Dimensions in mm.

    Abmessungen in mm.

    Thickness Max. width                
    From - to IF180 IF220 IF260 BH180D BH220BD P220 B260 P260 B300 P300
    0.45 - 0.50 - 1350 - 1320 1320 1320 - - 1340 1340
    0.50 - 0.55 - 1500 1500 1470 1470 1470 1480 1480 1550 1550
    0.55 - 0.60 - 1640 1590 1600 1610 1610 1610 1610 1620 1620
    0.60 - 0.65 - 1760 1680 1700 1720 1720 1750 1750 1620 1620
    0.65 - 0.66 1267 1830 1710 1850 1880 1880 1770 1770 1660 1660
    0.66 - 0.70 1267 1830 1710 1850 1880 1880 1770 1770 1694 1660
    0.70 - 0.75 1442 1850 1740 1930 1920 1920 1810 1810 1694 1680
    0.75 - 0.80 1464 1880 1760 1940 1960 1960 1860 1860 1710 1710
    0.80 - 0.90 1536 1910 1780 1950 2000 2000 1890 1890 1740 1740
    0.90 - 1.00 1536 1970 1800 1960 2030 2030 1970 1970 1780 1780
    1.00 - 1.10 1536 1970 1840 1930 2030 2030 1970 1970 1750 1750
    1.10 - 1.15 1536 1920 1850 1870 2030 2030 1920 1920 1720 1720
    1.15 - 1.20 1536 1920 1850 1870 2030 2030 1920 1920 1744 1720
    1.20 - 1.30 1627 1870 1810 1840 1980 1980 1880 1880 1744 1690
    1.30 - 1.40 1627 1820 1770 1800 1900 1900 1800 1800 1744 1660
    1.40 - 1.50 1627 1720 1680 1770 1840 1840 1764 1730 1744 1610
    1.50 - 1.60 1617 1640 1600 1730 1760 1760 1650 1650 1744 1570
    1.60 - 1.65 1617 1570 1510 1680 1714 1670 1570 1570 1744 1510
    1.65 - 1.70 1617 1570 1510 1680 1670 1670 1570 1570 1744 1510
    1.70 - 1.75 1617 1500 1470 1630 1664 1610 1564 1520 1744 1480
    1.75 - 1.80 1617 1460 1430 1580 1664 1560 1564 1480 1744 1460
    1.80 - 1.90 1617 1390 1370 1500 1589 1480 1539 1410 1694 1390
    1.90 - 1.95 1586 1330 1300 1430 1580 1410 1539 1340 1594 1320
    1.95 - 2.00 1586 1330 1300 1430 1539 1410 1539 1340 1594 1320
    2.00 - 2.10 - - - - - - - - 1260 1260

    Die Mindestbreite beträgt 900 mm. 
    Breiten unter 900 mm sind auf Anfrage erhältlich. 
    Bitte kontaktieren Sie uns. Bitte kontaktieren Sie uns über die Verfügbarkeit von: 
    - Oberflächenqualität C mit einer Dicke von mehr als 1,2 mm; 
    - Galvannealed (+ ZF) hochfeste Sorten. 
    - Serica® Premium Oberflächenqualität
     

    Galvanised (GI) and MagiZinc Auto (ZM) products (continued)

    Dimensions in mm. 

    Thickness Max. width          
    From - to HSLA220 HSLA260 HSLA300 HSLA340 HSLA380 HSLA420
    0.40 - 0.45 1520 1520 1270 - - -
    0.45 - 0.50 1520 1520 1370 - - -
    0.50 - 0.55 1520 1520 1520 - - -
    0.55 - 0.60 1550 1550 1520 - - -
    0.60 - 0.65 1550 1550 1520 1520 1420 -
    0.65 - 0.70 1550 1550 1550 1520 1420 -
    0.70 - 0.75 1550 1550 1550 1520 1520 1420
    0.75 - 1.60 1550 1550 1550 1520 1520 1520
    1.60 - 1.70 1550 1550 1400 1520 1150 1040
    1.70 - 1.80 1550 1550 1400 1460 1250 1140
    1.80 - 1.90 1550 1550 1550 1430 1320 1220
    1.90 - 2.00 1550 1550 1550 1430 1320 1220

    The minimum width is 900mm.
    For the dimensions of galvannealed (GA) high-strength grades, please contact us.

     

    Tolerances

    Tolerances comply with standard EN 10143:2006 (click here).
    Tighter tolerances are available on request.

     

    back to top

     

    Downloads