• Choose Language
  • Conveyance tubes -  Install® and Install® Plus

    Install and Install Plus multi-certified, hot-finished tube can be used with confidence and is the professional’s choice for a wide variety of building, engineering and industrial service applications.

    Premium multi-certified, hot-finished tubes

    Our multi-certified conveyance and pressure tubes provide a simplified solution for diverse application demands.

    Hot-finished for a uniform stress-free tube, with consistent mechanical properties and improved ductility, they are an ideal substitution for comparable hot-finished seamless products.

    Contact us

    Tata Steel

    PO Box 101

    Weldon Road, Corby

    Northants NN17 5UA

    T +44 (0)1536 402121

    F +44 (0)1536 404111

    Overview

     

    Key features

    Install® product range

    • Available in a wide range of sizes and wall thicknesses.
    • Available in a range of end (bevelled, plain) and surface finishes (self-colour, varnished, painted, polymer, epoxy or galvanised options available) (Note: certain size restrictions or minimum order quantities may apply).Backed up by technical experts who can offer advice on applications and product suitability.
    • Install® is fully technically supported with a wide range of available product brochures.
    • Certified to BES 6001 Responsible Sourcing standard.

    Install® 195

    • Hot-finished process route, delivering consistent performance, mechanical properties and improved ductility, compared to competitor cold-formed options that may suffer from internal stresses and increased risk of failure during manipulation.
    • A principal ‘gaslist’ tube for UK and ROI market applications.
    • Single certified product, manufactured in accordance to EN10255.
    • CE marked to CPD CAT 3 (gas/fuel) and CPD CAT 4 (water) for added confidence and application suitability.
    • 195 steel grade.
    • Manufactured in the UK.
    • Suitable for pressure applications and temperature range    -7 to + 260 ºC.

    Install® Plus 235

    • A principal ‘gaslist’ tube for Mainland European (MLE) market applications.
    • UK manufactured in accordance with a range of standards, including EN10255 and EN10217-2 to satisfy both Construction
    • Products Regulation (CPR) and the Pressure Equipment Directive (PED) requirements, where applicable.
    • Hot-finished process route, delivering consistent performance, mechanical properties and improved ductility, compared to competitor cold-formed options that may suffer from internal stresses and increased risk of failure during manipulation.
    • The perfect replacement for BS1387, which is now a withdrawn and unsupported standard.
    • Install® Plus 235 uses a higher 235MPa grade of steel (compared to lower 195 grade as per BS1387) delivering improved pressure integrity.
    • CE marked to CPR CAT 3 (gas/fuel) and CPR CAT 4 (water) for added confidence and application suitability.
    • Suitable for pressure applications and temperature range -20 to +300ºC.
    • Available in a wide range of sizes and weights (wall thickness).
    • We are able to offer exact lengths for bulk orders.
    • Our pre-grooved tube offers project savings as well as other installation benefits.

    Key Characteristics

    Product brands Install® 
    Sub-brands Install 195 Install Plus 235
    Delivery conditionand size range Hot OD21.3 - 165.1mm
    WLA (Weld Line Anneal) N/A N/A
    Main targeted application Building services

    HVAC and services conveyance

    HVAC, services and general industrial conveyance
    Primary grade/min yield strength (MPa)

    195

    235
    Tensile strength (MPa) 320-520 360-500
    Elongation (longitudinal min) % 27 25
    Standard temperature range (°C)1 -20 to 300 -20 to 300
    Low temp option
    (request at time of order)
    see note 2 see note 2
    Seamless substitute Yes Yes

    1 It may be possible to demonstrate lower temperature properties if full application is known, please contact one of our account managers to discuss your requirements.
    2  Other smaller sizes may be available upon request/order quantity size, please contact one of our account managers to discuss your requirements.

     

     

    back to top

    Dimensions

     

    Size Range - Generic - INSTALL and INSTALL PLUS

              Heavy Weight Medium Weight
    OD Nominal Bore Outside Diameter Wall
    Thickness
    Weight per metre Wall
    Thickness
    Weight per metre
      NB   OD   T Plain end/
    grooved tube
    Screwed and
    socketed
    T Plain end/
    grooved tube
    Screwed and
    socketed
      (mm) (inch) Max (mm) Min (mm) (mm) (kg/m) (kg/m) (mm) (kg/m) (kg/m)
    21.3 15 ½ 21.8 21 3.2 1.44 1.45 2.6 1.21 1.22
    26.9 20 ¾ 27.3 26.5 3.2 1.87 1.88 2.6 1.57 1.57
    33.7 25 1 34.2 33.3 4 2.93 2.95 3.2 2.41 2.43
    42.4 32 42.9 42 4 3.79 3.82 3.2 3.1 3.13
    48.3 40 48.8 47.9 4 4.37 4.41 3.2 3.56 3.6
    60.3 50 2 60.8 59.7 4.5 6.19 6.26 3.6 5.03 5.1
    76.1 65 76.6 75.3 4.5 7.93 8.05 3.6 6.42 6.54
    88.9 80 3 89.5 88 5 10.3 10.5 4 8.36 8.53
    114.3 100 4 115 113.1 5.4 14.5 14.8 4.5 12.2 12.5
    139.7 125 5 140.8 138.5 5.4 17.9 18.4 5 16.6 17.1
    165.1 150 6 166.5 163.9 5.4 21.3 21.9 5 19.8 20.4

     For larger Install® Plus XL EN10255 sizes, please refer to our Inline® product literature for full details.

     

    back to top

     

    Downloads

     

    Conveyance tubes

    The Complete Solution

    This publication contains technical information about our dedicated family of tube products for conveyance and pressure applications


    Install® Plus and Inline™ technical mini guide

    This publication contains technical information about our Premium multi-certified, hot-finished tubes for building, engineering and industrial applications.

    Further conveyance tube information and downloads can be found at www.tatasteelconstruction.com.

     

    back to top

    Overview

    Overview

     

    Key features

    Install® product range

    • Available in a wide range of sizes and wall thicknesses.
    • Available in a range of end (bevelled, plain) and surface finishes (self-colour, varnished, painted, polymer, epoxy or galvanised options available) (Note: certain size restrictions or minimum order quantities may apply).Backed up by technical experts who can offer advice on applications and product suitability.
    • Install® is fully technically supported with a wide range of available product brochures.
    • Certified to BES 6001 Responsible Sourcing standard.

    Install® 195

    • Hot-finished process route, delivering consistent performance, mechanical properties and improved ductility, compared to competitor cold-formed options that may suffer from internal stresses and increased risk of failure during manipulation.
    • A principal ‘gaslist’ tube for UK and ROI market applications.
    • Single certified product, manufactured in accordance to EN10255.
    • CE marked to CPD CAT 3 (gas/fuel) and CPD CAT 4 (water) for added confidence and application suitability.
    • 195 steel grade.
    • Manufactured in the UK.
    • Suitable for pressure applications and temperature range    -7 to + 260 ºC.

    Install® Plus 235

    • A principal ‘gaslist’ tube for Mainland European (MLE) market applications.
    • UK manufactured in accordance with a range of standards, including EN10255 and EN10217-2 to satisfy both Construction
    • Products Regulation (CPR) and the Pressure Equipment Directive (PED) requirements, where applicable.
    • Hot-finished process route, delivering consistent performance, mechanical properties and improved ductility, compared to competitor cold-formed options that may suffer from internal stresses and increased risk of failure during manipulation.
    • The perfect replacement for BS1387, which is now a withdrawn and unsupported standard.
    • Install® Plus 235 uses a higher 235MPa grade of steel (compared to lower 195 grade as per BS1387) delivering improved pressure integrity.
    • CE marked to CPR CAT 3 (gas/fuel) and CPR CAT 4 (water) for added confidence and application suitability.
    • Suitable for pressure applications and temperature range -20 to +300ºC.
    • Available in a wide range of sizes and weights (wall thickness).
    • We are able to offer exact lengths for bulk orders.
    • Our pre-grooved tube offers project savings as well as other installation benefits.

    Key Characteristics

    Product brands Install® 
    Sub-brands Install 195 Install Plus 235
    Delivery conditionand size range Hot OD21.3 - 165.1mm
    WLA (Weld Line Anneal) N/A N/A
    Main targeted application Building services

    HVAC and services conveyance

    HVAC, services and general industrial conveyance
    Primary grade/min yield strength (MPa)

    195

    235
    Tensile strength (MPa) 320-520 360-500
    Elongation (longitudinal min) % 27 25
    Standard temperature range (°C)1 -20 to 300 -20 to 300
    Low temp option
    (request at time of order)
    see note 2 see note 2
    Seamless substitute Yes Yes

    1 It may be possible to demonstrate lower temperature properties if full application is known, please contact one of our account managers to discuss your requirements.
    2  Other smaller sizes may be available upon request/order quantity size, please contact one of our account managers to discuss your requirements.

     

     

    back to top

    Dimensions

    Dimensions

     

    Size Range - Generic - INSTALL and INSTALL PLUS

              Heavy Weight Medium Weight
    OD Nominal Bore Outside Diameter Wall
    Thickness
    Weight per metre Wall
    Thickness
    Weight per metre
      NB   OD   T Plain end/
    grooved tube
    Screwed and
    socketed
    T Plain end/
    grooved tube
    Screwed and
    socketed
      (mm) (inch) Max (mm) Min (mm) (mm) (kg/m) (kg/m) (mm) (kg/m) (kg/m)
    21.3 15 ½ 21.8 21 3.2 1.44 1.45 2.6 1.21 1.22
    26.9 20 ¾ 27.3 26.5 3.2 1.87 1.88 2.6 1.57 1.57
    33.7 25 1 34.2 33.3 4 2.93 2.95 3.2 2.41 2.43
    42.4 32 42.9 42 4 3.79 3.82 3.2 3.1 3.13
    48.3 40 48.8 47.9 4 4.37 4.41 3.2 3.56 3.6
    60.3 50 2 60.8 59.7 4.5 6.19 6.26 3.6 5.03 5.1
    76.1 65 76.6 75.3 4.5 7.93 8.05 3.6 6.42 6.54
    88.9 80 3 89.5 88 5 10.3 10.5 4 8.36 8.53
    114.3 100 4 115 113.1 5.4 14.5 14.8 4.5 12.2 12.5
    139.7 125 5 140.8 138.5 5.4 17.9 18.4 5 16.6 17.1
    165.1 150 6 166.5 163.9 5.4 21.3 21.9 5 19.8 20.4

     For larger Install® Plus XL EN10255 sizes, please refer to our Inline® product literature for full details.

     

    back to top

     

    Downloads

    Downloads

     

    Conveyance tubes

    The Complete Solution

    This publication contains technical information about our dedicated family of tube products for conveyance and pressure applications


    Install® Plus and Inline™ technical mini guide

    This publication contains technical information about our Premium multi-certified, hot-finished tubes for building, engineering and industrial applications.

    Further conveyance tube information and downloads can be found at www.tatasteelconstruction.com.

     

    back to top