• Choose Language
  • Service Centre - Spain - General Industry

    Layde steel slu is located in the north of Spain, the Basque Country.

    For the transformation of coils this service centre has several slitting lines and also one cut-to-length line which can produce strips and also sheets in a variety of dimensions to serve customers in the general industry markets.

    • MagiZinc for long-lasting corrosion protection

      MagiZinc® is a popular choice for the production of cold-formed steel profiles for solar panel supports. These structures are constantly exposed to the elements and are expected to perform for at least 25 years.

      The long-lasting corrosion protection provided by MagiZinc®, combined with excellent formability, reduces component costs.

    • Ympress® for weight savings and component strength

      Ympress® is Tata Steel’s hot-rolled HSLA product. It is highly formable and delivers weight savings and increased component strength. The result is lighter, stronger, more consistent products.

      Ympress® adds value to automotive, lifting and excavating and shipbuilding applications, among others.

    • Ymvit® steel for enamelling

      Ymvit® cold-rolled steel for enamelling provides strong coating adhesion and reliable deep drawing. Ymvit® Ultra grades provide improved resistance to carbon boiling.

      Applications include barbecues, bathroom furniture, heat-exchange panels, photovoltaic solar panels, white boards and wall panels.

    Contact us

    Layde Steel slu

    Bº Eguzkitza, 11

    Ctra. Durango-Elorrio Km 1

    48200 Durango - Bizkaia

    Spain

    General information

    T +34 946 217850

    F +34 946 217868

    Overview

     

    Wide range of flat products

    Layde Steel slu is located in Durango, Spain, very close to the port of Bilbao. This offers very good logistics for our incoming Tata Steel material from the Netherlands and the UK. Our steel service centre processes and supplies a wide range of flat steel products to a variety of demanding sectors including:

    • construction
    • home appliances
    • furniture
    • general industry

    We are constantly introducing new products through close co-operation with Tata Steel mills.
    These following standard grades are available, with all properties following the Euronorm.

    • Pickled - DD11 to DD14 - EN 10111
    • Pickled - S235JR to S355JR – EN 10025
    • Pickled - S315MC to S700MC – EN 10149
    • Galvanized - DX51D + Z/ZF to DX57D+Z/ZF - EN 10346
    • Galvanized - S220GD+Z to S550GD+Z - EN 10346
    • Galvanized - HX260LAD+Z/ZF to HX420LAD+Z/ZF - EN 10346
    • Galvanized - HCT600X+Z/ZF to HCT780X+Z - EN 10346
    • Organic coated – Upon demand – RAL XXXX

    Proven capability

    Layde Steel has been serving customers since 1941. We slit and package coils and sheets to meet your exact needs. We offer the following steel products:

    • pickled
    • standard cold-rolled
    • hot-dip galvanised
    • electrozinc-plated steel
    • Pre-finished or organic-coated steel

    All coils are produced at Tata Steel mills although the pickled material is generally processed at Layde.

    We operate several slitting lines and one cut-to-length line. We can produce strips and sheets in the following dimensions:

    • width - from 10mm to 1650mm
    • length - from 300mm to 6000mm

    Tailored solutions

    We improve our processes continuously in order to add value and deliver tailored solutions to our customers. We have a dynamic, flexible and agile team that works hard to achieve cost-effective operations. Our service centre is certified to the ISO 9001:2008 standard.

    Environmental performance

    Protection of the environment is one of the pillars of our business strategy. We have implemented an Environmental Management System based on international standard ISO 14001:2004. You can find additional information in our downloads section .

     

     

    back to top

    Processing capability

     

    Layde has the following facilities, operated by highly-qualified people:

    Pickling line

    Our pickling line is a 136m long facility that uses a hydrochloric acid bath to remove the surface oxide layer on hot-rolled coils. This ensures the surface is completely clean and dry - allowing post-process oiling and eliminating the risk of oxidation. This facility is directly connected to a slitting line where we produce strips to the final width required by customers.

    Cold rolling

    Our facilities consist of two reversing 650mm SENDIZIMIR cold rolling mills. Thanks to them we can produce very fine tolerances across the entire thickness range. Our manufacturing range is between 0.20mm and 3mm (gauge) and between 10mm and 650mm (width). Inner diameters are 400-508mm depending on the product.

    Annealing

    Our EBNER furnaces are fully automatic. They use natural gas and a 100% hydrogen atmosphere that delivers an equal temperature in the whole coil. This ensures identical mechanical characteristics throughout the entire coil. This process also prevents contractions that can cause marks and scratches on the coil surface. Use of hydrogen provides a coil surface that is extraordinary clean and oil-free.

    Slitters and Cut-to-Length (CTL)

    For processing our precision cold-rolled, galvanised, electrozinc coated and pre-finished steel coils, we have different slitters and a cut-to-length facility. These produce material to meet the final dimensions required by customers.  Our capabilities are: from 25mm to 1850mm (width) and from 300mm to 6000mm (length).

    Skinpass

    We have skinpass facilities that provide material with a slight surface hardening but without modifying any of its mechanical properties. This process delivers a smooth surface within the roughness range demanded by customers.

    Dimensional capability

     SlittingDecoilingPickling
    Thickness 0.2 – 7.0mm 0.3 – 3.0mm 1.4 – 7.0mm
    Width 10 – 1650mm 300 – 1500mm  Up to 1300mm
    Length - 300 – 6000mm -

    Max. pickling strength level is 800 MPa.

    Please consult our sales department regarding specific technical feasibility of dimensional combinations, tolerances and grades.



    back to top

    Overview

    Overview

     

    Wide range of flat products

    Layde Steel slu is located in Durango, Spain, very close to the port of Bilbao. This offers very good logistics for our incoming Tata Steel material from the Netherlands and the UK. Our steel service centre processes and supplies a wide range of flat steel products to a variety of demanding sectors including:

    • construction
    • home appliances
    • furniture
    • general industry

    We are constantly introducing new products through close co-operation with Tata Steel mills.
    These following standard grades are available, with all properties following the Euronorm.

    • Pickled - DD11 to DD14 - EN 10111
    • Pickled - S235JR to S355JR – EN 10025
    • Pickled - S315MC to S700MC – EN 10149
    • Galvanized - DX51D + Z/ZF to DX57D+Z/ZF - EN 10346
    • Galvanized - S220GD+Z to S550GD+Z - EN 10346
    • Galvanized - HX260LAD+Z/ZF to HX420LAD+Z/ZF - EN 10346
    • Galvanized - HCT600X+Z/ZF to HCT780X+Z - EN 10346
    • Organic coated – Upon demand – RAL XXXX

    Proven capability

    Layde Steel has been serving customers since 1941. We slit and package coils and sheets to meet your exact needs. We offer the following steel products:

    • pickled
    • standard cold-rolled
    • hot-dip galvanised
    • electrozinc-plated steel
    • Pre-finished or organic-coated steel

    All coils are produced at Tata Steel mills although the pickled material is generally processed at Layde.

    We operate several slitting lines and one cut-to-length line. We can produce strips and sheets in the following dimensions:

    • width - from 10mm to 1650mm
    • length - from 300mm to 6000mm

    Tailored solutions

    We improve our processes continuously in order to add value and deliver tailored solutions to our customers. We have a dynamic, flexible and agile team that works hard to achieve cost-effective operations. Our service centre is certified to the ISO 9001:2008 standard.

    Environmental performance

    Protection of the environment is one of the pillars of our business strategy. We have implemented an Environmental Management System based on international standard ISO 14001:2004. You can find additional information in our downloads section .

     

     

    back to top

    Processing capability

    Processing capability

     

    Layde has the following facilities, operated by highly-qualified people:

    Pickling line

    Our pickling line is a 136m long facility that uses a hydrochloric acid bath to remove the surface oxide layer on hot-rolled coils. This ensures the surface is completely clean and dry - allowing post-process oiling and eliminating the risk of oxidation. This facility is directly connected to a slitting line where we produce strips to the final width required by customers.

    Cold rolling

    Our facilities consist of two reversing 650mm SENDIZIMIR cold rolling mills. Thanks to them we can produce very fine tolerances across the entire thickness range. Our manufacturing range is between 0.20mm and 3mm (gauge) and between 10mm and 650mm (width). Inner diameters are 400-508mm depending on the product.

    Annealing

    Our EBNER furnaces are fully automatic. They use natural gas and a 100% hydrogen atmosphere that delivers an equal temperature in the whole coil. This ensures identical mechanical characteristics throughout the entire coil. This process also prevents contractions that can cause marks and scratches on the coil surface. Use of hydrogen provides a coil surface that is extraordinary clean and oil-free.

    Slitters and Cut-to-Length (CTL)

    For processing our precision cold-rolled, galvanised, electrozinc coated and pre-finished steel coils, we have different slitters and a cut-to-length facility. These produce material to meet the final dimensions required by customers.  Our capabilities are: from 25mm to 1850mm (width) and from 300mm to 6000mm (length).

    Skinpass

    We have skinpass facilities that provide material with a slight surface hardening but without modifying any of its mechanical properties. This process delivers a smooth surface within the roughness range demanded by customers.

    Dimensional capability

     SlittingDecoilingPickling
    Thickness 0.2 – 7.0mm 0.3 – 3.0mm 1.4 – 7.0mm
    Width 10 – 1650mm 300 – 1500mm  Up to 1300mm
    Length - 300 – 6000mm -

    Max. pickling strength level is 800 MPa.

    Please consult our sales department regarding specific technical feasibility of dimensional combinations, tolerances and grades.



    back to top

    Downloads