• Choose Language
  • Cold-rolled - High-strength steel

    Tata Steel offers a range of steels for applications requiring high strength without the weight penalty.

    The range comprises micro-alloyed, rephosphorised and carbon manganese high-strength steels in cold-rolled uncoated condition. These steels are ideal for strong, thin-gauge products.

    Cold rolled steel: consistent, reliable products

    Our advanced and ultra high-strength cold-rolled steels DP600, DP800, DP1000 and HQ1500 are lightweight and enable design freedom for complex parts.

    Their high yield and ductility ensure shape accuracy and tolerancing, which enable thickness reduction and maintained in-service performance for difficult-to-form parts.

    Contact us

    Tata Steel

    PO Box 10.000

    1970 CA IJmuiden

    Netherlands

    Helpdesk

    T +31 (0)251 494191

    Overview

    Micro-alloyed grades

    Micro-alloyed grades have high-strength levels through precipitation and grain refinement hardening. Careful use of alloying elements ensures high mechanical resistance and good weldability. There is limited scope for cold forming.

    Tata Steel supplies high-strength micro-alloyed (HSLA) steel which complies with European standard EN 10268:2006+A1:2013.

    Bake-hardening grades

    Bake-hardening steel gains extra strength after going through an automotive paint oven.  The benefit of this is a product with relatively good formability, combined with a higher strength final part.

    Rephosphorised grades

    These grades deliver high mechanical resistance and good suitability for cold forming due to solid solution hardening by phosphorus. Our rephosphorised grades are highly suited to the manufacture of car body panels and structural components because of their good resistance to impact and fatigue.

    Carbon manganese grades                                                                             

    Our carbon manganese product combines high strength with excellent formability for the most difficult cold-forming applications.

    RADECOL grades                                                                             

    Tailor-made for steel panel radiators offering higher strength and improved shape consistency. Manufacturers can down-gauge to improve their yield and produce lightweight radiators for ease of installation.

    Applications

    Automotive components
    Construction components
    Furniture
    Precision tubes
    Steel panel radiators

    Relationship with standards

    Tata Steel can supply the following cold-rolled high-strength steel grades:

    Micro-alloyed grades

    EN 10268:2006+A1:2013

    EN 10268: 1999

    Grade

    Grade

    HC260LA

    H240LA

    HC300LA

    H280LA

    HC340LA

    H320LA

    HC380LA

    H360LA

    HC420LA

    H400LA

     

    Bake-hardening grades

    EN 10338: 2010

    VDA239

    HC220B

    CR210BH

     

    Rephosphorised grades

    Grade

    SEW 094 Grade

    HC220P

    ZSt E220P

    HC260P

    ZSt E260P

     

    Carbon manganese grades

    Grade

    Grade

    HC300CM

    No EN specified equivalent

    The carbon manganese product is supplied to Tata Steel’s own standard. There is no direct EN standard equivalent.


    RADECOL grades

      EN 10268: 1999
    Grade Grade
    RADECOL 0 No EN specified equivalent
    RADECOL 2 No EN specified equivalent
    RADECOL 3 No EN specified equivalent

     

    The RADECOL product is supplied to Tata Steel’s own standard. There is no direct EN standard equivalent.

     

     

    back to top

    Properties

    Mechanical properties

    The available grades have the following mechanical properties measured perpendicular to the rolling direction (transverse test pieces):

    Micro-alloyed grades

    EN 10268:
    2006+A1:2013

    Yield strength
     Rp0.2 1

    Tensile strength Rm

    Min. elongation after fracture
    A 2

    Min. r-value r90 3

    Min. n-value n90

    Grade

    N/mm2

    N/mm2

    %

     

     

    HC260LA

    260 - 330

    350 - 430

    26

    -

    -

    HC300LA

    300 - 380

    380 - 480

    23

    -

    -

    HC340LA

    340 - 420

    410 - 510

    21

    -

    -

    HC380LA

    380 - 480

    440 - 580

    19

    -

    -

    HC420LA

    420 - 520

    470 - 600

    17

    -

    -

     

    Bake-hardening grades

    EN EN10338:
    2010

    Yield strength Re 1

    Tensile strength Rm

    Min. elongation after fracture
    A 2

    Min. r-value r90 3

    Min. n-value n90

    Min. BH2

    Grade

    N/mm2

    N/mm2

    %

     

     

    N/mm2

    HC220B

    220 - 270

    320 - 400

    32

    1.5

    0.16

    35


    Rephosphorised grades

     

    Yield strength Re 1

    Tensile strength Rm

    Min. elongation after fracture
    A 2

    Min. r-value
    r90 3

    Min. n-value n90

    Grade

    N/mm2

    N/mm2

    %

     

     

    HC220P

    220 - 270

    320 - 400

    32

    1.3

    0.16

    HC260P

    260 - 320

    360 - 440

    29

    -

    -

    1. If the yield strength is pronounced (yield flag), the values apply to the lower yield point (ReL).
    2. When thickness ≤ 0.7mm, the minimum value for elongation is reduced by 2%.
    3. For products with thickness > 2mm the minimum r90 is reduced by 0.2.

    Carbon manganese steel

     

    Yield strength ReL

    Tensile strength Rm

    Min. elongation
    after fracture A

    Grade

    N/mm2

    N/mm2

    %

    HC300CM

    300 - 360

    440 - 500

    26

     
    RADECOL grades

     

    Yield strength
    Rp0.2 1

    Tensile strength
    Rm

    Min. elongation after fracture
    A

    Grade

    N/mm2

    N/mm2

    %

    RADECOL 0

    200 - 290

    310 - 390

    30

    RADECOL 2

    245 - 330

    350 - 440

    26

    RADECOL 3

    300 - 380

    380 - 480

    23

     

     

    Chemical composition

    Cold-rolled high-strength steels supplied by Tata Steel comply to the following cast analysis with maximum values in weight percentages unless otherwise shown:

    Micro-alloyed grades

    EN 10268:2006+A1:2013

    C

    Mn

    Si

    P

    S

    Al

    Ti 1

    Nb 1

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    HC260LA

    0.10

    1.0

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC300LA

    0.12

    1.4

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC340LA

    0.12

    1.5

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC380LA

    0.12

    1.6

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC420LA

    0.14

    1.6

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    1. These additional elements may be used individually or in combination where they appear in the definition of the steel within the composition limits indicated. Vanadium and boron may also be added. However, the sum of the contents of these four dispersoidal elements shall not exceed 0.22%.
    Values in weight %.

     
    Bake-hardening grades

    EN 10338, 2010

    C

    Mn

    Si

    P

    S

    Al

    Ti

    Nb

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    HC220B

    0.08

    0.7

    0.5

    0.085

    0.025

    0.015

    -

    -

    Values in weight %.

     

    Rephosphorised grades

     

    C

    Mn

    Si

    P

    S

    Al

    Ti

    Nb

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    HC220P

    0.07

    0.7

    0.5

    0.08

    0.025

    0.015

    -

    -

    HC260P

    0.08

    0.7

    0.5

    0.1

    0.025

    0.015

    -

    -

    Values in weight %.

    Carbon manganese steel

     

    C

    Mn

    Si

    P

    S

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    HC300CM

    0.18

    1.40

    0.03

    0.025

    0.012

    Values in weight %.


    RADECOL grades

     

    C

    Mn

    Si

    P

    S

    Alsol

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    RADECOL 0

    0.085

    0.55

    0

    0.03

    0.03

    0.015

    RADECOL 2

    0.12

    1.10

    0.5

    0.10

    0.025

    0.015

    RADECOL 3

    0.11

    1.00

    0.5

    0.12

    0.025

    0.015

    Values in weight %.

     

    back to top

    Dimensions

    Dimensional Capability

    Continuously annealed (CA).

    Dimensions in mm.

    Thickness Max. width        
    From - up to HC260LA HC300LA HC340LA HC380LA HC420LA HC220B
    0.38 - 0.40 1390 - - - - -
    0.40 - 0.43 1330 - - - - -
    0.43 - 0.50 1390 - - - - -
    0.50 - 0.55 1515 1500 - - - 1400
    0.55 - 0.60 1515 1500 1500 - - 1400
    0.60 - 0.65 1600 1545 1515 1410 - 1400
    0.65 - 0.70 1600 1545 1515 1410 - 1400
    0.70 - 0.80 1710 1750 1515 1410 - 1400
    0.80 - 0.90 1710 1750 1515 1410 1300 1400
    0.90 - 0.95 1820 1750 1515 1410 1319 1400
    0.95 - 1.00 1820 1750 1515 1410 1319 1400
    1.00 - 1.10 1820 1750 1545 1484 1400 1400
    1.10 - 1.20 1820 1750 1545 1484 1400 1400
    1.20 - 1.28 1750 1750 1545 1484 1450 1400
    1.28 - 1.30 1750 1750 1545 1484 1450 1400
    1.30 - 1.40 1750 1750 1545 1484 1450 1400
    1.40 - 1.50 1750 1750 1545 1484 1450 1400
    1.50 - 1.60 1750 1750 1545 1484 1450 1400
    1.60 - 1.70 1750 1750 1545 1545 1450 1400
    1.70 - 1.80 1620 1750 1545 1545 1450 1400
    1.80 - 1.90 1500 1550 1500 1500 - 1400
    1.90 - 2.00 1500 1550 1500 1500 - 1400

    Minimum width is 821mm for HC300LA.
    Minimum width is 900mm for HC220B
    Minimum width is 825mm for all other grades
     

    Thickness Max. width    
    From - up to RADECOL 0 RADECOL 2 RADECOL 3
    0.90 - 0.95 1820 1820 1750
    0.95 - 1.00 1820 1820 1750
    1.00 - 1.10 1820 1820 1750
    1.10 - 1.20 1820 1820 1750

    Please contact us for dimensions beyond those shown in the table above

    Batch annealed (BA).

    Dimensions in mm.

    Thickness Max. width          
    From - up to HC260LA HC300LA HC340LA HC380LA HC420LA HC220P HC260P
    0.40 - 0.50 1590 - - - - - -
    0.50 - 0.55 1640 1520 - - - 1500 1500
    0.55 - 0.60 1670 1550 - - - 1500 1500
    0.60 - 0.65 1700 1570 1420 1380 1100 1800 1800
    0.65 - 0.70 1730 1590 1450 1430 1170 1800 1800
    0.70 - 0.80 1760 1620 1500 1480 1190 1800 1800
    0.80 - 0.90 1810 1680 1600 1580 1340 1800 1800
    0.90 - 1.00 1840 1710 1600 1600 1380 1800 1800
    1.00 - 1.10 1880 1750 1610 1620 1450 1800 1800
    1.10 - 1.20 1920 1780 1620 1650 1480 1800 1800
    1.20 - 1.30 1940 1810 1630 1680 1510 1800 1800
    1.30 - 1.40 1970 1830 1680 1700 1560 1800 1800
    1.40 - 1.50 1990 1850 1700 1720 1630 1800 1800
    1.50 - 1.60 2000 1870 1670 1700 1580 1800 1800
    1.60 - 1.70 2000 1910 1650 1680 1530 1800 1800
    1.70 - 1.80 2000 1910 1620 1650 1500 1800 1800
    1.80 - 1.90 2000 1900 1590 1640 1470 1800 1800
    1.90 - 2.00 2000 1870 1560 1630 1440 1800 1800
    2.00 - 2.10 2000 1840 1520 1610 1430 1800 1800
    2.10 - 2.20 2000 1810 1480 1500 1410 1800 1800
    2.20 - 2.30 1940 1770 1440 1420 1400 1700 1700
    2.30 - 2.40 1880 1720 1400 1360 1390 1700 1700
    2.40 - 2.50 1820 1670 1360 1300 1370 1600 1600
    2.50 - 2.60 1750 1640 1320 1240 1320 1600 1600
    2.60 - 2.70 1690 1570 1260 1200 1290 1600 1600
    2.70 - 2.80 1650 1520 1200 1150 1250 1400 1400
    2.80 - 2.90 1590 1460 1150 - 1210 1400 1400
    2.90 - 3.00 1530 1410 - - 1170 1400 1400

    Minimum width is 1050mm for HC380LA and HC420LA.
    Minimum width is 900mm for the other grades.
    Other dimensions are available on request - please contact us.

     

    Tolerances

    Tolerances comply with standard EN 10131: 2006 (click here).
    Tighter tolerances are available, please contact us for details.

     

    back to top

    Overview

    Overview

    Micro-alloyed grades

    Micro-alloyed grades have high-strength levels through precipitation and grain refinement hardening. Careful use of alloying elements ensures high mechanical resistance and good weldability. There is limited scope for cold forming.

    Tata Steel supplies high-strength micro-alloyed (HSLA) steel which complies with European standard EN 10268:2006+A1:2013.

    Bake-hardening grades

    Bake-hardening steel gains extra strength after going through an automotive paint oven.  The benefit of this is a product with relatively good formability, combined with a higher strength final part.

    Rephosphorised grades

    These grades deliver high mechanical resistance and good suitability for cold forming due to solid solution hardening by phosphorus. Our rephosphorised grades are highly suited to the manufacture of car body panels and structural components because of their good resistance to impact and fatigue.

    Carbon manganese grades                                                                             

    Our carbon manganese product combines high strength with excellent formability for the most difficult cold-forming applications.

    RADECOL grades                                                                             

    Tailor-made for steel panel radiators offering higher strength and improved shape consistency. Manufacturers can down-gauge to improve their yield and produce lightweight radiators for ease of installation.

    Applications

    Automotive components
    Construction components
    Furniture
    Precision tubes
    Steel panel radiators

    Relationship with standards

    Tata Steel can supply the following cold-rolled high-strength steel grades:

    Micro-alloyed grades

    EN 10268:2006+A1:2013

    EN 10268: 1999

    Grade

    Grade

    HC260LA

    H240LA

    HC300LA

    H280LA

    HC340LA

    H320LA

    HC380LA

    H360LA

    HC420LA

    H400LA

     

    Bake-hardening grades

    EN 10338: 2010

    VDA239

    HC220B

    CR210BH

     

    Rephosphorised grades

    Grade

    SEW 094 Grade

    HC220P

    ZSt E220P

    HC260P

    ZSt E260P

     

    Carbon manganese grades

    Grade

    Grade

    HC300CM

    No EN specified equivalent

    The carbon manganese product is supplied to Tata Steel’s own standard. There is no direct EN standard equivalent.


    RADECOL grades

      EN 10268: 1999
    Grade Grade
    RADECOL 0 No EN specified equivalent
    RADECOL 2 No EN specified equivalent
    RADECOL 3 No EN specified equivalent

     

    The RADECOL product is supplied to Tata Steel’s own standard. There is no direct EN standard equivalent.

     

     

    back to top

    Properties

    Properties

    Mechanical properties

    The available grades have the following mechanical properties measured perpendicular to the rolling direction (transverse test pieces):

    Micro-alloyed grades

    EN 10268:
    2006+A1:2013

    Yield strength
     Rp0.2 1

    Tensile strength Rm

    Min. elongation after fracture
    A 2

    Min. r-value r90 3

    Min. n-value n90

    Grade

    N/mm2

    N/mm2

    %

     

     

    HC260LA

    260 - 330

    350 - 430

    26

    -

    -

    HC300LA

    300 - 380

    380 - 480

    23

    -

    -

    HC340LA

    340 - 420

    410 - 510

    21

    -

    -

    HC380LA

    380 - 480

    440 - 580

    19

    -

    -

    HC420LA

    420 - 520

    470 - 600

    17

    -

    -

     

    Bake-hardening grades

    EN EN10338:
    2010

    Yield strength Re 1

    Tensile strength Rm

    Min. elongation after fracture
    A 2

    Min. r-value r90 3

    Min. n-value n90

    Min. BH2

    Grade

    N/mm2

    N/mm2

    %

     

     

    N/mm2

    HC220B

    220 - 270

    320 - 400

    32

    1.5

    0.16

    35


    Rephosphorised grades

     

    Yield strength Re 1

    Tensile strength Rm

    Min. elongation after fracture
    A 2

    Min. r-value
    r90 3

    Min. n-value n90

    Grade

    N/mm2

    N/mm2

    %

     

     

    HC220P

    220 - 270

    320 - 400

    32

    1.3

    0.16

    HC260P

    260 - 320

    360 - 440

    29

    -

    -

    1. If the yield strength is pronounced (yield flag), the values apply to the lower yield point (ReL).
    2. When thickness ≤ 0.7mm, the minimum value for elongation is reduced by 2%.
    3. For products with thickness > 2mm the minimum r90 is reduced by 0.2.

    Carbon manganese steel

     

    Yield strength ReL

    Tensile strength Rm

    Min. elongation
    after fracture A

    Grade

    N/mm2

    N/mm2

    %

    HC300CM

    300 - 360

    440 - 500

    26

     
    RADECOL grades

     

    Yield strength
    Rp0.2 1

    Tensile strength
    Rm

    Min. elongation after fracture
    A

    Grade

    N/mm2

    N/mm2

    %

    RADECOL 0

    200 - 290

    310 - 390

    30

    RADECOL 2

    245 - 330

    350 - 440

    26

    RADECOL 3

    300 - 380

    380 - 480

    23

     

     

    Chemical composition

    Cold-rolled high-strength steels supplied by Tata Steel comply to the following cast analysis with maximum values in weight percentages unless otherwise shown:

    Micro-alloyed grades

    EN 10268:2006+A1:2013

    C

    Mn

    Si

    P

    S

    Al

    Ti 1

    Nb 1

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    HC260LA

    0.10

    1.0

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC300LA

    0.12

    1.4

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC340LA

    0.12

    1.5

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC380LA

    0.12

    1.6

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    HC420LA

    0.14

    1.6

    0.5

    0.030

    0.025

    0.015

    0.15

    0.09

    1. These additional elements may be used individually or in combination where they appear in the definition of the steel within the composition limits indicated. Vanadium and boron may also be added. However, the sum of the contents of these four dispersoidal elements shall not exceed 0.22%.
    Values in weight %.

     
    Bake-hardening grades

    EN 10338, 2010

    C

    Mn

    Si

    P

    S

    Al

    Ti

    Nb

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    HC220B

    0.08

    0.7

    0.5

    0.085

    0.025

    0.015

    -

    -

    Values in weight %.

     

    Rephosphorised grades

     

    C

    Mn

    Si

    P

    S

    Al

    Ti

    Nb

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    Max.

    Max.

    HC220P

    0.07

    0.7

    0.5

    0.08

    0.025

    0.015

    -

    -

    HC260P

    0.08

    0.7

    0.5

    0.1

    0.025

    0.015

    -

    -

    Values in weight %.

    Carbon manganese steel

     

    C

    Mn

    Si

    P

    S

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    HC300CM

    0.18

    1.40

    0.03

    0.025

    0.012

    Values in weight %.


    RADECOL grades

     

    C

    Mn

    Si

    P

    S

    Alsol

    Grade

    Max.

    Max.

    Max.

    Max.

    Max.

    Min.

    RADECOL 0

    0.085

    0.55

    0

    0.03

    0.03

    0.015

    RADECOL 2

    0.12

    1.10

    0.5

    0.10

    0.025

    0.015

    RADECOL 3

    0.11

    1.00

    0.5

    0.12

    0.025

    0.015

    Values in weight %.

     

    back to top

    Dimensions

    Dimensions

    Dimensional Capability

    Continuously annealed (CA).

    Dimensions in mm.

    Thickness Max. width        
    From - up to HC260LA HC300LA HC340LA HC380LA HC420LA HC220B
    0.38 - 0.40 1390 - - - - -
    0.40 - 0.43 1330 - - - - -
    0.43 - 0.50 1390 - - - - -
    0.50 - 0.55 1515 1500 - - - 1400
    0.55 - 0.60 1515 1500 1500 - - 1400
    0.60 - 0.65 1600 1545 1515 1410 - 1400
    0.65 - 0.70 1600 1545 1515 1410 - 1400
    0.70 - 0.80 1710 1750 1515 1410 - 1400
    0.80 - 0.90 1710 1750 1515 1410 1300 1400
    0.90 - 0.95 1820 1750 1515 1410 1319 1400
    0.95 - 1.00 1820 1750 1515 1410 1319 1400
    1.00 - 1.10 1820 1750 1545 1484 1400 1400
    1.10 - 1.20 1820 1750 1545 1484 1400 1400
    1.20 - 1.28 1750 1750 1545 1484 1450 1400
    1.28 - 1.30 1750 1750 1545 1484 1450 1400
    1.30 - 1.40 1750 1750 1545 1484 1450 1400
    1.40 - 1.50 1750 1750 1545 1484 1450 1400
    1.50 - 1.60 1750 1750 1545 1484 1450 1400
    1.60 - 1.70 1750 1750 1545 1545 1450 1400
    1.70 - 1.80 1620 1750 1545 1545 1450 1400
    1.80 - 1.90 1500 1550 1500 1500 - 1400
    1.90 - 2.00 1500 1550 1500 1500 - 1400

    Minimum width is 821mm for HC300LA.
    Minimum width is 900mm for HC220B
    Minimum width is 825mm for all other grades
     

    Thickness Max. width    
    From - up to RADECOL 0 RADECOL 2 RADECOL 3
    0.90 - 0.95 1820 1820 1750
    0.95 - 1.00 1820 1820 1750
    1.00 - 1.10 1820 1820 1750
    1.10 - 1.20 1820 1820 1750

    Please contact us for dimensions beyond those shown in the table above

    Batch annealed (BA).

    Dimensions in mm.

    Thickness Max. width          
    From - up to HC260LA HC300LA HC340LA HC380LA HC420LA HC220P HC260P
    0.40 - 0.50 1590 - - - - - -
    0.50 - 0.55 1640 1520 - - - 1500 1500
    0.55 - 0.60 1670 1550 - - - 1500 1500
    0.60 - 0.65 1700 1570 1420 1380 1100 1800 1800
    0.65 - 0.70 1730 1590 1450 1430 1170 1800 1800
    0.70 - 0.80 1760 1620 1500 1480 1190 1800 1800
    0.80 - 0.90 1810 1680 1600 1580 1340 1800 1800
    0.90 - 1.00 1840 1710 1600 1600 1380 1800 1800
    1.00 - 1.10 1880 1750 1610 1620 1450 1800 1800
    1.10 - 1.20 1920 1780 1620 1650 1480 1800 1800
    1.20 - 1.30 1940 1810 1630 1680 1510 1800 1800
    1.30 - 1.40 1970 1830 1680 1700 1560 1800 1800
    1.40 - 1.50 1990 1850 1700 1720 1630 1800 1800
    1.50 - 1.60 2000 1870 1670 1700 1580 1800 1800
    1.60 - 1.70 2000 1910 1650 1680 1530 1800 1800
    1.70 - 1.80 2000 1910 1620 1650 1500 1800 1800
    1.80 - 1.90 2000 1900 1590 1640 1470 1800 1800
    1.90 - 2.00 2000 1870 1560 1630 1440 1800 1800
    2.00 - 2.10 2000 1840 1520 1610 1430 1800 1800
    2.10 - 2.20 2000 1810 1480 1500 1410 1800 1800
    2.20 - 2.30 1940 1770 1440 1420 1400 1700 1700
    2.30 - 2.40 1880 1720 1400 1360 1390 1700 1700
    2.40 - 2.50 1820 1670 1360 1300 1370 1600 1600
    2.50 - 2.60 1750 1640 1320 1240 1320 1600 1600
    2.60 - 2.70 1690 1570 1260 1200 1290 1600 1600
    2.70 - 2.80 1650 1520 1200 1150 1250 1400 1400
    2.80 - 2.90 1590 1460 1150 - 1210 1400 1400
    2.90 - 3.00 1530 1410 - - 1170 1400 1400

    Minimum width is 1050mm for HC380LA and HC420LA.
    Minimum width is 900mm for the other grades.
    Other dimensions are available on request - please contact us.

     

    Tolerances

    Tolerances comply with standard EN 10131: 2006 (click here).
    Tighter tolerances are available, please contact us for details.

     

    back to top