Metallic coated

Steel for forming

Our cold-rolled forming steels are available in a wide range of grades and corrosion-resistant coatings. Each grade is designed for specific applications and comes with a choice of surface quality. Extensive dimensional choice provides opportunities for cutting waste and maximising yield.

MagiZinc® improves corrosion resistance with half the thickness of conventional zinc coatings, increasing yield, reducing cost and facilitating stronger, lighter products. It offers improved automotive corrosion protection and higher process efficiency.

Applications

  • Automotive components
  • Building components
  • Domestic appliances
  • Electrical goods
  • Tubes and sections
     
Component containing a MagiZinc coating
Hot dip galvanizing line, IJmuiden
Tinplate coils
Product specification
Steel for forming is currently available in the following grades

EN-Engineering-Product-Metallic coated-Forming-DX51D+Z/+ZF/+ZM TSE

DX51D+Z/+ZF/+ZM
Specification details for DX51D+Z/+ZF/+ZM

EN-Engineering-Product-Metallic coated-Forming-All Grades OverviewTSE

Overview

Overview

With MagiZinc® you can manufacture lighter products with higher strength thanks to the improved corrosion protection and at the same time increase the production volume and further reduce costs thanks to the better processing properties.
 

Relationship with standards

Metallic coated steel for forming complies with the following European standard
 

EN 10346: 2015

DX51D+Z/+ZF/+ZM

DX52D+Z/+ZF/+ZM

DX53D+Z/+ZF/+ZM

DX54D+Z/+ZF/+ZM

DX56D+Z/+ZF/+ZM

DX57D+Z/+ZM

DX58D+Z 1

1. Not in standard. Tata Steel’s own specification.

EN-Engineering-Product-Metallic coated-All Grades Coatings Surface aspectsTSE

Coatings and surface aspects

Coatings

Three types of metallic coating are available:

Pure zinc

Galvanised steel (+Z) is coated with an almost pure zinc coating (>99% zinc).

Zinc-iron alloy

Galvannealed steel (+ZF) is coated with a zinc coating containing approximately 8-12% iron. 
For further information on our galvannealed products please visit our Automotive catalogue.

MagiZinc

MagiZinc steel (+ZM) is coated with a zinc coating containing additional magnesium and aluminium.
 

Coating weight

Coating Minimum Maximum
Pure zinc (Z) 90 (6 µm/side) 600 (42 µm/side)
Zinc-iron (ZF) 90 (6 µm/side) 140 (10 µm/side)
MagiZinc (ZM)1 70 (5 µm/side) 310 (22 µm/side)
Coating weight measured in g/m2 double-sided (µm, per side).
Coils with coatings > 450 g/m2 will be supplied in oscillated coiled condition.
Coils coated with 600 g/m2 are only available in width range 980 to 1300 mm.
For MagiZinc (ZM) coating weights below 100 g/m2 please visit our Automotive catalogue
 

Surface quality

Surface quality complies with standard: EN 10346:2015. Galvanised steels are available in surface quality A, B or C.
For the highest surface quality requirements we also offer Serica FLO®. For more details please visit our Automotive catalogue.

Surface quality A: as coated surface

Imperfections such as pimples, marks, scratches, pits, variations in surface appearance, dark spots, stripe marks and light passivation stains are permissible.
Stretch levelling breaks or run-off marks may appear. Coil breaks and stretcher strains may also appear.

Surface quality B: improved surface

With this surface quality, small imperfections such as stretch levelling breaks, skin pass marks, slight scratches, indentations, surface structure, zinc run-off marks and light passivation stains are permissible.

Surface quality C: best quality surface

For more information on surface quality C please visit our Automotive catalogue.

 

Surface finish

Pure zinc

MA: minimised spangle, as coated surface (Z).
MB: minimised spangle, improved surface (Z).
MC: minimised spangle, best quality surface (Z).

Zinc-iron alloy

A: as coated surface (ZF).
B: improved surface (ZF).
C: best quality surface (ZF).

MagiZinc®

A : as coated surface (ZM).
B : improved surface (ZM).
C: best quality surface (ZM).

 

Surface roughness

Metallic coated steel (with the exception of galvanised steel with standard surface (MA)) can be supplied in various grades of roughness – please contact us for more details. If no roughness is specified, roughness will be as shown in the table below.

Roughness Ra (µm)

 

cut off 0.8mm

cut off 2.5mm

0.6 - 1.9

0.7 - 2.2

 

Surface treatments

The surface treatments available are O, C and CO.

Oiling (O)

The material surface can be oiled with preservative oil. Other types of oil - for increasing strength or reducing weight – are available to help achieve your optimum performance parameters. Please contact us for details.

Tata Steel offers the following range of oiling levels:

Coating type

Capability

Pure zinc (Z)

0.25 - 1.5 g/m2

Zinc-iron (ZF)

0.5 - 1.5 g/m2

MagiZinc® (ZM)

0.25 - 1.5 g/m2

Other oiling levels are available on request.

Chromium-free passivation (C)

This surface treatment temporarily protects the zinc-coated material against white rust during transportation and storage (not applicable to all qualities and dimensions – please contact us for details).

Chromium-free passivation and oiled (CO)

Please request this combination of surface treatments if you require extra protection against white rust formation (not applicable to all qualities and dimensions – please contact us for details).

Untreated (U)

Please contact us regarding the availability of untreated coils.

EN-Engineering-Product-Metallic coated-Forming-DX51D-PropertiesTSE

Properties

Properties


Mechanical properties

Metallic coated steel for forming has the following mechanical properties. These are measured transverse to the rolling direction:

EN 10346: 2015 Grade DX51D+Z/+ZF/+ZM
Yield strength 1 Re N/mm² -
Tensile strength Rm N/mm² 270 - 500
Elongation 2 % 22
Min. r-value   -
Min. n-value   -
1. If the yield point is not pronounced, the values apply to the 0.2% - proof strength Rp0.2 ; if the yield strength is pronounced, the values apply to the lower yield point ReL.
2. Decreased minimum elongation values apply for product thickness t ≤ 0.50mm (minus 4 units) and for 0.50mm ≤ t ≤ 0.70mm (minus 2 units).
Elongation after fracture A uses test piece length L0 = 80 mm.
 

Chemical composition

Tata Steel complies with the following cast analysis:

EN 10346: 2015 Grade DX51D+Z/+ZF/+ZM
C Max. 0.18
Mn Max. 1.20
P Max. 0.12
S Max. 0.045
Al Min. -
N Max. -
Ti Max. 0.30
All values are in weight%.

EN-Engineering-Product-Metallic coated-Forming-DX51D-DimensionsTSE

Dimensions

Dimensional capability
 

Galvanised (+Z) products

Dimensions in mm.

Thickness Max. width
From - up to DX51D
0.35 - 0.40 1370
0.40 - 0.55 1520
0.55 - 0.60 1600
0.60 - 0.65 1770
0.65 - 0.70 1870
0.70 - 0.75 1890
0.75 - 0.80 1990
0.80 - 2.00 2000
2.00 - 2.50 1550
2.50 - 3.50 1540
3.50 - 3.60 1500
3.60 - 3.70 1450
3.70 - 3.85 1400
3.85 - 4.00 1350
For widths below 900 mm, please contact us.
For thicknesses over 2.50 mm, the minimum width is 1000 mm.
 

Galvannealed (+ZF) products

Dimensions in mm.

Thickness Max. width
From - up to DX51D
0.50 - 0.60 1420
0.60 - 0.65 1700
0.65 - 1.50 1850
1.50 - 1.60 1830
1.60 - 1.70 1710
1.70 - 1.75 1660
1.75 - 1.80 1620
1.80 - 1.90 1530
1.90 - 2.00 1440
For widths below 900 mm, please contact us.
 

MagiZinc® (+ZM) products

Dimensions in mm.

Thickness Max. width
From - up to DX51D
0.40 - 0.55 1520
0.55 - 0.60 1600
0.60 - 0.65 1770
0.65 - 0.70 1870
0.70 - 0.75 1890
0.75 - 0.80 1990
0.80 - 2.00 2000
For widths below 900 mm, please contact us.
For thicknesses between 2.00 and 2.50 mm, please contact us.
 

Tolerances

Tolerances comply with standard EN 10143 2006.
Tighter tolerances are available, please contact us for details.

EN-EngineeringAutomotive-Product-Metallic Coated-All Grades Shape and Dimensional TolerancesTSE

Shape and dimensional tolerances

Tolerances on thickness

The tolerances comply with standard EN 10143: 2006.
Tighter tolerances are available on request.
Thickness tolerance availability is shown below:

Thickness tolerance

Availability

Full thickness tolerance

Available

Special thickness tolerance

Available

50% of full thickness tolerance

Refer before ordering

 

The following tolerances apply to the grades with a minimum value for the yield strength lower than 260N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

> 0.40

≤ 0.60

± 0.04

± 0.05

± 0.06

± 0.035

± 0.040

± 0.045

> 0.60

≤ 0.80

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.80

≤ 1.00

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 1.00

≤ 1.20

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.20

≤ 1.60

± 0.10

± 0.11

± 0.12

± 0.060

± 0.070

± 0.080

> 1.60

≤ 2.00

± 0.12

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 2.00

≤ 2.50

± 0.14

± 0.15

± 0.16

± 0.090

± 0.100

± 0.110

> 2.50

≤ 3.00

± 0.17

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 3.00

≤ 5.00

± 0.20

± 0.20

± 0.21

± 0.15

± 0.16

± 0.17

> 5.00

≤ 6.50

± 0.22

± 0.22

± 0.23

± 0.17

± 0.18

± 0.19

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 260N/mm² ≤ Rp0.2 < 360N/mm² and for grades DX51D and S550GD.

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.035

± 0.040

-

> 0.40

≤ 0.60

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.60

≤ 0.80

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.80

≤ 1.00

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.00

≤ 1.20

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.20

≤ 1.60

± 0.11

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 1.60

≤ 2.00

± 0.14

± 0.15

± 0.16

± 0.080

± 0.090

± 0.110

> 2.00

≤ 2.50

± 0.16

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 2.50

≤ 3.00

± 0.19

± 0.20

± 0.20

± 0.130

± 0.140

± 0.150

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 360N/mm² ≤ Rp0.2 ≤ 420N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.040

± 0.045

-

> 0.40

≤ 0.60

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.60

≤ 0.80

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.80

≤ 1.00

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.00

≤ 1.20

± 0.10

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.20

≤ 1.60

± 0.13

± 0.14

± 0.16

± 0.080

± 0.090

± 0.110

> 1.60

≤ 2.00

± 0.16

± 0.17

± 0.19

± 0.090

± 0.110

± 0.120

> 2.00

≤ 2.50

± 0.18

± 0.20

± 0.21

± 0.120

± 0.130

± 0.140

> 2.50

≤ 3.00

± 0.22

± 0.22

± 0.23

± 0.140

± 0.150

± 0.160

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 420N/mm² < Rp0.2 ≤ 900N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.06

± 0.07

-

± 0.045

± 0.050

-

> 0.40

≤ 0.60

± 0.06

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.60

≤ 0.80

± 0.07

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 0.80

≤ 1.00

± 0.09

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.00

≤ 1.20

± 0.11

± 0.13

± 0.14

± 0.080

± 0.090

± 0.110

> 1.20

≤ 1.60

± 0.15

± 0.16

± 0.18

± 0.090

± 0.110

± 0.120

> 1.60

≤ 2.00

± 0.18

± 0.19

± 0.21

± 0.110

± 0.120

± 0.140

> 2.00

≤ 2.50

± 0.21

± 0.22

± 0.24

± 0.140

± 0.150

± 0.170

> 2.50

≤ 3.00

± 0.24

± 0.25

± 0.26

± 0.170

± 0.180

± 0.190

> 3.00

≤ 5.00

± 0.26

± 0.27

± 0.28

± 0.23

± 0.24

± 0.26

> 5.00

≤ 6.50

± 0.28

± 0.29

± 0.30

± 0.25

± 0.26

± 0.28

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

Tolerances on width

The tolerances on width comply with standard EN 10143: 2006
MagiZinc is not included in the standard, but fulfils EN 10143: 2006 requirements.
Tighter tolerances are available on request.

Tolerances in mm.

Nominal width w Normal tolerances Special tolerances (S)
600 ≤ w ≤ 1200 + 5
0
+ 2
0
1200 < w ≤ 1500 + 6
0
+ 2
0
1500 < w ≤ 1800 + 7
0
+ 3
0
w > 1800 + 8
0
+ 3
0

 

Dimensions and coil weights

Description Availability
Coil diameter inner 610mm
(508 mm available on request)
Coil diameter outer 10/7 x width max
1000mm min.
2500mm max.
Coil weight 30t max.
33t max available after consultation
Coil weight limited by maximum outer diameter
Maximum weight allowed by road/rail transport
Some products may have different coil weight ranges available
Usually a minimum coil weight up to 85% of the maximum coil weight can be requested
KIM: width ≤ 1200 mm 11.7 - 22.7 kg/mm width
KIM: 1200mm < width ≤ 1700 mm 11.6 - 21.7 kg/mm width
KIM: width > 1700 mm 11.0 kg/mm width and 11.6 - 21.7 kg/mm width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

EN-EngineeringAutomotive-Product-Metallic coated-All grades Further processingTSE

Further processing

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times

Light gauge processing

Processing type Slitting Decoiling Blanking
Thickness range (mm) 0.2 - 7.0 0.3 - 6.0 0.3 - 6.0
Width range (mm) 10 - 2050 50 - 2600 200 - 2600
Length range - up to 6m up to 6m
Locations UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Netherlands

For further information please visit our Service Centre webpages.

 

 

EN-Engineering-Product-Metallic coated-Forming-DX52D+Z/+ZF/+ZM TSE

DX52D+Z/+ZF/+ZM
Specification details for DX52D+Z/+ZF/+ZM

EN-Engineering-Product-Metallic coated-Forming-All Grades OverviewTSE

Overview

Overview

With MagiZinc® you can manufacture lighter products with higher strength thanks to the improved corrosion protection and at the same time increase the production volume and further reduce costs thanks to the better processing properties.
 

Relationship with standards

Metallic coated steel for forming complies with the following European standard
 

EN 10346: 2015

DX51D+Z/+ZF/+ZM

DX52D+Z/+ZF/+ZM

DX53D+Z/+ZF/+ZM

DX54D+Z/+ZF/+ZM

DX56D+Z/+ZF/+ZM

DX57D+Z/+ZM

DX58D+Z 1

1. Not in standard. Tata Steel’s own specification.

EN-Engineering-Product-Metallic coated-All Grades Coatings Surface aspectsTSE

Coatings and surface aspects

Coatings

Three types of metallic coating are available:

Pure zinc

Galvanised steel (+Z) is coated with an almost pure zinc coating (>99% zinc).

Zinc-iron alloy

Galvannealed steel (+ZF) is coated with a zinc coating containing approximately 8-12% iron. 
For further information on our galvannealed products please visit our Automotive catalogue.

MagiZinc

MagiZinc steel (+ZM) is coated with a zinc coating containing additional magnesium and aluminium.
 

Coating weight

Coating Minimum Maximum
Pure zinc (Z) 90 (6 µm/side) 600 (42 µm/side)
Zinc-iron (ZF) 90 (6 µm/side) 140 (10 µm/side)
MagiZinc (ZM)1 70 (5 µm/side) 310 (22 µm/side)
Coating weight measured in g/m2 double-sided (µm, per side).
Coils with coatings > 450 g/m2 will be supplied in oscillated coiled condition.
Coils coated with 600 g/m2 are only available in width range 980 to 1300 mm.
For MagiZinc (ZM) coating weights below 100 g/m2 please visit our Automotive catalogue
 

Surface quality

Surface quality complies with standard: EN 10346:2015. Galvanised steels are available in surface quality A, B or C.
For the highest surface quality requirements we also offer Serica FLO®. For more details please visit our Automotive catalogue.

Surface quality A: as coated surface

Imperfections such as pimples, marks, scratches, pits, variations in surface appearance, dark spots, stripe marks and light passivation stains are permissible.
Stretch levelling breaks or run-off marks may appear. Coil breaks and stretcher strains may also appear.

Surface quality B: improved surface

With this surface quality, small imperfections such as stretch levelling breaks, skin pass marks, slight scratches, indentations, surface structure, zinc run-off marks and light passivation stains are permissible.

Surface quality C: best quality surface

For more information on surface quality C please visit our Automotive catalogue.

 

Surface finish

Pure zinc

MA: minimised spangle, as coated surface (Z).
MB: minimised spangle, improved surface (Z).
MC: minimised spangle, best quality surface (Z).

Zinc-iron alloy

A: as coated surface (ZF).
B: improved surface (ZF).
C: best quality surface (ZF).

MagiZinc®

A : as coated surface (ZM).
B : improved surface (ZM).
C: best quality surface (ZM).

 

Surface roughness

Metallic coated steel (with the exception of galvanised steel with standard surface (MA)) can be supplied in various grades of roughness – please contact us for more details. If no roughness is specified, roughness will be as shown in the table below.

Roughness Ra (µm)

 

cut off 0.8mm

cut off 2.5mm

0.6 - 1.9

0.7 - 2.2

 

Surface treatments

The surface treatments available are O, C and CO.

Oiling (O)

The material surface can be oiled with preservative oil. Other types of oil - for increasing strength or reducing weight – are available to help achieve your optimum performance parameters. Please contact us for details.

Tata Steel offers the following range of oiling levels:

Coating type

Capability

Pure zinc (Z)

0.25 - 1.5 g/m2

Zinc-iron (ZF)

0.5 - 1.5 g/m2

MagiZinc® (ZM)

0.25 - 1.5 g/m2

Other oiling levels are available on request.

Chromium-free passivation (C)

This surface treatment temporarily protects the zinc-coated material against white rust during transportation and storage (not applicable to all qualities and dimensions – please contact us for details).

Chromium-free passivation and oiled (CO)

Please request this combination of surface treatments if you require extra protection against white rust formation (not applicable to all qualities and dimensions – please contact us for details).

Untreated (U)

Please contact us regarding the availability of untreated coils.

EN-Engineering-Product-Metallic coated-Forming-DX52D-PropertiesTSE

Properties

Properties


Mechanical properties

Metallic coated steel for forming has the following mechanical properties. These are measured transverse to the rolling direction:

EN 10346: 2015 Grade DX52D+Z/+ZF/+ZM
Yield strength 1 Re N/mm² 140 - 300 3
Tensile strength Rm N/mm² 270 - 420
Elongation 2 % 26
Min. r-value   -
Min. n-value   -
1. If the yield point is not pronounced, the values apply to the 0.2% - proof strength Rp0.2 ; if the yield strength is pronounced, the values apply to the lower yield point ReL.
2. Decreased minimum elongation values apply for product thickness t ≤ 0.50 mm (minus 4 units) and for 0.50 mm ≤ t ≤ 0.70 mm (minus 2 units).
Elongation after fracture A uses test piece length L0 = 80 mm.
3. This value applies to skin-passed products only (surface qualities B and C).
 

Chemical composition

Tata Steel complies with the following cast analysis:

EN 10346: 2015 Grade DX52D+Z/+ZF/+ZM
C Max. 0.12
Mn Max. 0.60
P Max. 0.10
S Max. 0.045
Si Max. 0.50
Al Min. -
N Max. -
Ti Max. 0.30
All values are in weight%.

EN-Engineering-Product-Metallic coated-Forming-DX52D-DimensionsTSE

Dimensions

Dimensional capability
 

Galvanised (+Z) products

Dimensions in mm.

Thickness Max. width
From - up to DX52D
0.36 - 0.40 1370
0.40 - 0.55 1520
0.55 - 0.60 1600
0.60 - 0.65 1770
0.65 - 0.70 1870
0.70 - 0.75 1890
0.75 - 0.80 1990
0.80 - 2.00 2000
2.00 - 2.50 1550
2.50 - 3.50 1540
3.50 - 3.60 1500
3.60 - 3.70 1450
3.70 - 3.85 1400
3.85 - 4.00 1350
For widths below 900 mm, please contact us.
For thicknesses over 2.50 mm, the minimum width is 1000 mm.
 

Galvannealed (+ZF) products

Dimensions in mm.

Thickness Max. width
From - up to DX52D
0.50 - 0.60 1420
0.60 - 0.65 1700
0.65 - 1.50 1850
1.50 - 1.60 1830
1.60 - 1.70 1710
1.70 - 1.75 1660
1.75 - 1.80 1620
1.80 - 1.90 1530
1.90 - 2.00 1440
For widths below 900 mm, please contact us.
 

MagiZinc® (+ZM) products

Dimensions in mm.

Thickness Max. width
From - up to DX52D
0.40 - 0.55 1520
0.55 - 0.60 1600
0.60 - 0.65 1770
0.65 - 0.70 1870
0.70 - 0.75 1890
0.75 - 0.80 1990
0.80 - 2.00 2000
For widths below 900 mm, please contact us.
For thicknesses between 2.00 and 2.50 mm, please contact us.
 

Tolerances

Tolerances comply with standard EN 10143 2006.
Tighter tolerances are available, please contact us for details.

EN-EngineeringAutomotive-Product-Metallic Coated-All Grades Shape and Dimensional TolerancesTSE

Shape and dimensional tolerances

Tolerances on thickness

The tolerances comply with standard EN 10143: 2006.
Tighter tolerances are available on request.
Thickness tolerance availability is shown below:

Thickness tolerance

Availability

Full thickness tolerance

Available

Special thickness tolerance

Available

50% of full thickness tolerance

Refer before ordering

 

The following tolerances apply to the grades with a minimum value for the yield strength lower than 260N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

> 0.40

≤ 0.60

± 0.04

± 0.05

± 0.06

± 0.035

± 0.040

± 0.045

> 0.60

≤ 0.80

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.80

≤ 1.00

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 1.00

≤ 1.20

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.20

≤ 1.60

± 0.10

± 0.11

± 0.12

± 0.060

± 0.070

± 0.080

> 1.60

≤ 2.00

± 0.12

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 2.00

≤ 2.50

± 0.14

± 0.15

± 0.16

± 0.090

± 0.100

± 0.110

> 2.50

≤ 3.00

± 0.17

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 3.00

≤ 5.00

± 0.20

± 0.20

± 0.21

± 0.15

± 0.16

± 0.17

> 5.00

≤ 6.50

± 0.22

± 0.22

± 0.23

± 0.17

± 0.18

± 0.19

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 260N/mm² ≤ Rp0.2 < 360N/mm² and for grades DX51D and S550GD.

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.035

± 0.040

-

> 0.40

≤ 0.60

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.60

≤ 0.80

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.80

≤ 1.00

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.00

≤ 1.20

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.20

≤ 1.60

± 0.11

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 1.60

≤ 2.00

± 0.14

± 0.15

± 0.16

± 0.080

± 0.090

± 0.110

> 2.00

≤ 2.50

± 0.16

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 2.50

≤ 3.00

± 0.19

± 0.20

± 0.20

± 0.130

± 0.140

± 0.150

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 360N/mm² ≤ Rp0.2 ≤ 420N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.040

± 0.045

-

> 0.40

≤ 0.60

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.60

≤ 0.80

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.80

≤ 1.00

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.00

≤ 1.20

± 0.10

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.20

≤ 1.60

± 0.13

± 0.14

± 0.16

± 0.080

± 0.090

± 0.110

> 1.60

≤ 2.00

± 0.16

± 0.17

± 0.19

± 0.090

± 0.110

± 0.120

> 2.00

≤ 2.50

± 0.18

± 0.20

± 0.21

± 0.120

± 0.130

± 0.140

> 2.50

≤ 3.00

± 0.22

± 0.22

± 0.23

± 0.140

± 0.150

± 0.160

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 420N/mm² < Rp0.2 ≤ 900N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.06

± 0.07

-

± 0.045

± 0.050

-

> 0.40

≤ 0.60

± 0.06

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.60

≤ 0.80

± 0.07

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 0.80

≤ 1.00

± 0.09

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.00

≤ 1.20

± 0.11

± 0.13

± 0.14

± 0.080

± 0.090

± 0.110

> 1.20

≤ 1.60

± 0.15

± 0.16

± 0.18

± 0.090

± 0.110

± 0.120

> 1.60

≤ 2.00

± 0.18

± 0.19

± 0.21

± 0.110

± 0.120

± 0.140

> 2.00

≤ 2.50

± 0.21

± 0.22

± 0.24

± 0.140

± 0.150

± 0.170

> 2.50

≤ 3.00

± 0.24

± 0.25

± 0.26

± 0.170

± 0.180

± 0.190

> 3.00

≤ 5.00

± 0.26

± 0.27

± 0.28

± 0.23

± 0.24

± 0.26

> 5.00

≤ 6.50

± 0.28

± 0.29

± 0.30

± 0.25

± 0.26

± 0.28

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

Tolerances on width

The tolerances on width comply with standard EN 10143: 2006
MagiZinc is not included in the standard, but fulfils EN 10143: 2006 requirements.
Tighter tolerances are available on request.

Tolerances in mm.

Nominal width w Normal tolerances Special tolerances (S)
600 ≤ w ≤ 1200 + 5
0
+ 2
0
1200 < w ≤ 1500 + 6
0
+ 2
0
1500 < w ≤ 1800 + 7
0
+ 3
0
w > 1800 + 8
0
+ 3
0

 

Dimensions and coil weights

Description Availability
Coil diameter inner 610mm
(508 mm available on request)
Coil diameter outer 10/7 x width max
1000mm min.
2500mm max.
Coil weight 30t max.
33t max available after consultation
Coil weight limited by maximum outer diameter
Maximum weight allowed by road/rail transport
Some products may have different coil weight ranges available
Usually a minimum coil weight up to 85% of the maximum coil weight can be requested
KIM: width ≤ 1200 mm 11.7 - 22.7 kg/mm width
KIM: 1200mm < width ≤ 1700 mm 11.6 - 21.7 kg/mm width
KIM: width > 1700 mm 11.0 kg/mm width and 11.6 - 21.7 kg/mm width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

EN-EngineeringAutomotive-Product-Metallic coated-All grades Further processingTSE

Further processing

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times

Light gauge processing

Processing type Slitting Decoiling Blanking
Thickness range (mm) 0.2 - 7.0 0.3 - 6.0 0.3 - 6.0
Width range (mm) 10 - 2050 50 - 2600 200 - 2600
Length range - up to 6m up to 6m
Locations UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Netherlands

For further information please visit our Service Centre webpages.

 

 

EN-Engineering-Product-Metallic coated-Forming-DX53D+Z/+ZF/+ZM TSE

DX53D+Z/+ZF/+ZM
Specification details for DX53D+Z/+ZF/+ZM

EN-Engineering-Product-Metallic coated-Forming-All Grades OverviewTSE

Overview

Overview

With MagiZinc® you can manufacture lighter products with higher strength thanks to the improved corrosion protection and at the same time increase the production volume and further reduce costs thanks to the better processing properties.
 

Relationship with standards

Metallic coated steel for forming complies with the following European standard
 

EN 10346: 2015

DX51D+Z/+ZF/+ZM

DX52D+Z/+ZF/+ZM

DX53D+Z/+ZF/+ZM

DX54D+Z/+ZF/+ZM

DX56D+Z/+ZF/+ZM

DX57D+Z/+ZM

DX58D+Z 1

1. Not in standard. Tata Steel’s own specification.

EN-Engineering-Product-Metallic coated-All Grades Coatings Surface aspectsTSE

Coatings and surface aspects

Coatings

Three types of metallic coating are available:

Pure zinc

Galvanised steel (+Z) is coated with an almost pure zinc coating (>99% zinc).

Zinc-iron alloy

Galvannealed steel (+ZF) is coated with a zinc coating containing approximately 8-12% iron. 
For further information on our galvannealed products please visit our Automotive catalogue.

MagiZinc

MagiZinc steel (+ZM) is coated with a zinc coating containing additional magnesium and aluminium.
 

Coating weight

Coating Minimum Maximum
Pure zinc (Z) 90 (6 µm/side) 600 (42 µm/side)
Zinc-iron (ZF) 90 (6 µm/side) 140 (10 µm/side)
MagiZinc (ZM)1 70 (5 µm/side) 310 (22 µm/side)
Coating weight measured in g/m2 double-sided (µm, per side).
Coils with coatings > 450 g/m2 will be supplied in oscillated coiled condition.
Coils coated with 600 g/m2 are only available in width range 980 to 1300 mm.
For MagiZinc (ZM) coating weights below 100 g/m2 please visit our Automotive catalogue
 

Surface quality

Surface quality complies with standard: EN 10346:2015. Galvanised steels are available in surface quality A, B or C.
For the highest surface quality requirements we also offer Serica FLO®. For more details please visit our Automotive catalogue.

Surface quality A: as coated surface

Imperfections such as pimples, marks, scratches, pits, variations in surface appearance, dark spots, stripe marks and light passivation stains are permissible.
Stretch levelling breaks or run-off marks may appear. Coil breaks and stretcher strains may also appear.

Surface quality B: improved surface

With this surface quality, small imperfections such as stretch levelling breaks, skin pass marks, slight scratches, indentations, surface structure, zinc run-off marks and light passivation stains are permissible.

Surface quality C: best quality surface

For more information on surface quality C please visit our Automotive catalogue.

 

Surface finish

Pure zinc

MA: minimised spangle, as coated surface (Z).
MB: minimised spangle, improved surface (Z).
MC: minimised spangle, best quality surface (Z).

Zinc-iron alloy

A: as coated surface (ZF).
B: improved surface (ZF).
C: best quality surface (ZF).

MagiZinc®

A : as coated surface (ZM).
B : improved surface (ZM).
C: best quality surface (ZM).

 

Surface roughness

Metallic coated steel (with the exception of galvanised steel with standard surface (MA)) can be supplied in various grades of roughness – please contact us for more details. If no roughness is specified, roughness will be as shown in the table below.

Roughness Ra (µm)

 

cut off 0.8mm

cut off 2.5mm

0.6 - 1.9

0.7 - 2.2

 

Surface treatments

The surface treatments available are O, C and CO.

Oiling (O)

The material surface can be oiled with preservative oil. Other types of oil - for increasing strength or reducing weight – are available to help achieve your optimum performance parameters. Please contact us for details.

Tata Steel offers the following range of oiling levels:

Coating type

Capability

Pure zinc (Z)

0.25 - 1.5 g/m2

Zinc-iron (ZF)

0.5 - 1.5 g/m2

MagiZinc® (ZM)

0.25 - 1.5 g/m2

Other oiling levels are available on request.

Chromium-free passivation (C)

This surface treatment temporarily protects the zinc-coated material against white rust during transportation and storage (not applicable to all qualities and dimensions – please contact us for details).

Chromium-free passivation and oiled (CO)

Please request this combination of surface treatments if you require extra protection against white rust formation (not applicable to all qualities and dimensions – please contact us for details).

Untreated (U)

Please contact us regarding the availability of untreated coils.

EN-Engineering-Product-Metallic coated-Forming-DX53D-PropertiesTSE

Properties

Properties


Mechanical properties

Metallic coated steel for forming has the following mechanical properties. These are measured transverse to the rolling direction:
 

EN 10346: 2015 Grade DX53D+Z/+ZF/+ZM
Yield strength 1 Re N/mm² 140 - 260
Tensile strength Rm N/mm² 270 - 380
Elongation 2 % 30
Min. r-value   -
Min. n-value   -
1. If the yield point is not pronounced, the values apply to the 0.2% - proof strength Rp0.2 ; if the yield strength is pronounced, the values apply to the lower yield point ReL.
2. Decreased minimum elongation values apply for product thickness t ≤ 0.50mm (minus 4 units) and for 0.50mm ≤ t ≤ 0.70mm (minus 2 units).
Elongation after fracture A uses test piece length L0 = 80 mm.
 

Chemical composition

Tata Steel complies with the following cast analysis:

EN 10346: 2015 Grade DX53D+Z/+ZF/+ZM
C Max. 0.12
Mn Max. 0.60
P Max. 0.10
S Max. 0.045
Al Min. -
N Max. -
Ti Max. 0.30

All values are in weight%.

EN-Engineering-Product-Metallic coated-Forming-DX53D-DimensionsTSE

Dimensions

Dimensional capability
 

Galvanised (+Z) products

Dimensions in mm.

Thickness Max. width
From - up to DX53D
0.45 - 0.50 1520
0.50 - 0.55 1540
0.55 - 0.60 1640
0.60 - 0.65 1740
0.65 - 0.70 1830
0.70 - 0.75 1910
0.75 - 0.80 1950
0.80 - 1.20 2000
1.20 - 1.30 1940
1.30 - 1.40 1890
1.40 - 1.50 1830
1.50 - 1.60 1740
1.60 - 1.65 1670
1.65 - 1.70 1640
1.70 - 1.75 1600
1.75 - 1.80 1570
1.80 - 1.90 1530
1.90 - 2.00 1450
For widths below 900 mm, please contact us.
 

Galvannealed (+ZF) products

Dimensions in mm.

Thickness Max. width
From - up to DX53D
0.50 - 0.60 1420
0.60 - 0.65 1700
0.65 - 1.45 1850
1.45 - 1.50 1850
1.50 - 1.60 1830
1.60 - 1.70 1710
1.70 - 1.75 1660
1.75 - 1.80 1620
1.80 - 1.90 1530
1.90 - 2.00 1440
For widths below 900 mm, please contact us.
 

MagiZinc® (+ZM) products

Dimensions in mm.

Thickness Max. width 
From - up to DX53D
0.45 - 0.50 1520
0.50 - 0.55 1540
0.55 - 0.60 1640
0.60 - 0.65 1740
0.65 - 0.70 1830
0.70 - 0.75 1910
0.75 - 0.80 1950
0.80 - 1.20 2000
1.20 - 1.30 1940
1.30 - 1.40 1890
1.40 - 1.50 1830
1.50 - 1.60 1740
1.60 - 1.70 1640
1.70 - 1.80 1570
1.80 - 1.90 1530
1.90 - 2.00 1450
For widths below 900 mm, please contact us.

 

Tolerances

Tolerances comply with standard EN 10143 2006.
Tighter tolerances are available, please contact us for details.

EN-EngineeringAutomotive-Product-Metallic Coated-All Grades Shape and Dimensional TolerancesTSE

Shape and dimensional tolerances

Tolerances on thickness

The tolerances comply with standard EN 10143: 2006.
Tighter tolerances are available on request.
Thickness tolerance availability is shown below:

Thickness tolerance

Availability

Full thickness tolerance

Available

Special thickness tolerance

Available

50% of full thickness tolerance

Refer before ordering

 

The following tolerances apply to the grades with a minimum value for the yield strength lower than 260N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

> 0.40

≤ 0.60

± 0.04

± 0.05

± 0.06

± 0.035

± 0.040

± 0.045

> 0.60

≤ 0.80

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.80

≤ 1.00

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 1.00

≤ 1.20

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.20

≤ 1.60

± 0.10

± 0.11

± 0.12

± 0.060

± 0.070

± 0.080

> 1.60

≤ 2.00

± 0.12

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 2.00

≤ 2.50

± 0.14

± 0.15

± 0.16

± 0.090

± 0.100

± 0.110

> 2.50

≤ 3.00

± 0.17

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 3.00

≤ 5.00

± 0.20

± 0.20

± 0.21

± 0.15

± 0.16

± 0.17

> 5.00

≤ 6.50

± 0.22

± 0.22

± 0.23

± 0.17

± 0.18

± 0.19

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 260N/mm² ≤ Rp0.2 < 360N/mm² and for grades DX51D and S550GD.

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.035

± 0.040

-

> 0.40

≤ 0.60

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.60

≤ 0.80

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.80

≤ 1.00

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.00

≤ 1.20

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.20

≤ 1.60

± 0.11

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 1.60

≤ 2.00

± 0.14

± 0.15

± 0.16

± 0.080

± 0.090

± 0.110

> 2.00

≤ 2.50

± 0.16

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 2.50

≤ 3.00

± 0.19

± 0.20

± 0.20

± 0.130

± 0.140

± 0.150

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 360N/mm² ≤ Rp0.2 ≤ 420N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.040

± 0.045

-

> 0.40

≤ 0.60

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.60

≤ 0.80

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.80

≤ 1.00

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.00

≤ 1.20

± 0.10

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.20

≤ 1.60

± 0.13

± 0.14

± 0.16

± 0.080

± 0.090

± 0.110

> 1.60

≤ 2.00

± 0.16

± 0.17

± 0.19

± 0.090

± 0.110

± 0.120

> 2.00

≤ 2.50

± 0.18

± 0.20

± 0.21

± 0.120

± 0.130

± 0.140

> 2.50

≤ 3.00

± 0.22

± 0.22

± 0.23

± 0.140

± 0.150

± 0.160

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 420N/mm² < Rp0.2 ≤ 900N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.06

± 0.07

-

± 0.045

± 0.050

-

> 0.40

≤ 0.60

± 0.06

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.60

≤ 0.80

± 0.07

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 0.80

≤ 1.00

± 0.09

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.00

≤ 1.20

± 0.11

± 0.13

± 0.14

± 0.080

± 0.090

± 0.110

> 1.20

≤ 1.60

± 0.15

± 0.16

± 0.18

± 0.090

± 0.110

± 0.120

> 1.60

≤ 2.00

± 0.18

± 0.19

± 0.21

± 0.110

± 0.120

± 0.140

> 2.00

≤ 2.50

± 0.21

± 0.22

± 0.24

± 0.140

± 0.150

± 0.170

> 2.50

≤ 3.00

± 0.24

± 0.25

± 0.26

± 0.170

± 0.180

± 0.190

> 3.00

≤ 5.00

± 0.26

± 0.27

± 0.28

± 0.23

± 0.24

± 0.26

> 5.00

≤ 6.50

± 0.28

± 0.29

± 0.30

± 0.25

± 0.26

± 0.28

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

Tolerances on width

The tolerances on width comply with standard EN 10143: 2006
MagiZinc is not included in the standard, but fulfils EN 10143: 2006 requirements.
Tighter tolerances are available on request.

Tolerances in mm.

Nominal width w Normal tolerances Special tolerances (S)
600 ≤ w ≤ 1200 + 5
0
+ 2
0
1200 < w ≤ 1500 + 6
0
+ 2
0
1500 < w ≤ 1800 + 7
0
+ 3
0
w > 1800 + 8
0
+ 3
0

 

Dimensions and coil weights

Description Availability
Coil diameter inner 610mm
(508 mm available on request)
Coil diameter outer 10/7 x width max
1000mm min.
2500mm max.
Coil weight 30t max.
33t max available after consultation
Coil weight limited by maximum outer diameter
Maximum weight allowed by road/rail transport
Some products may have different coil weight ranges available
Usually a minimum coil weight up to 85% of the maximum coil weight can be requested
KIM: width ≤ 1200 mm 11.7 - 22.7 kg/mm width
KIM: 1200mm < width ≤ 1700 mm 11.6 - 21.7 kg/mm width
KIM: width > 1700 mm 11.0 kg/mm width and 11.6 - 21.7 kg/mm width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

EN-EngineeringAutomotive-Product-Metallic coated-All grades Further processingTSE

Further processing

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times

Light gauge processing

Processing type Slitting Decoiling Blanking
Thickness range (mm) 0.2 - 7.0 0.3 - 6.0 0.3 - 6.0
Width range (mm) 10 - 2050 50 - 2600 200 - 2600
Length range - up to 6m up to 6m
Locations UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Netherlands

For further information please visit our Service Centre webpages.

 

 

EN-Engineering-Product-Metallic coated-Forming-DX54D+Z/+ZF/+ZM TSE

DX54D+Z/+ZF/+ZM
Specification details for DX54D+Z/+ZF/+ZM

EN-Engineering-Product-Metallic coated-Forming-All Grades OverviewTSE

Overview

Overview

With MagiZinc® you can manufacture lighter products with higher strength thanks to the improved corrosion protection and at the same time increase the production volume and further reduce costs thanks to the better processing properties.
 

Relationship with standards

Metallic coated steel for forming complies with the following European standard
 

EN 10346: 2015

DX51D+Z/+ZF/+ZM

DX52D+Z/+ZF/+ZM

DX53D+Z/+ZF/+ZM

DX54D+Z/+ZF/+ZM

DX56D+Z/+ZF/+ZM

DX57D+Z/+ZM

DX58D+Z 1

1. Not in standard. Tata Steel’s own specification.

EN-Engineering-Product-Metallic coated-All Grades Coatings Surface aspectsTSE

Coatings and surface aspects

Coatings

Three types of metallic coating are available:

Pure zinc

Galvanised steel (+Z) is coated with an almost pure zinc coating (>99% zinc).

Zinc-iron alloy

Galvannealed steel (+ZF) is coated with a zinc coating containing approximately 8-12% iron. 
For further information on our galvannealed products please visit our Automotive catalogue.

MagiZinc

MagiZinc steel (+ZM) is coated with a zinc coating containing additional magnesium and aluminium.
 

Coating weight

Coating Minimum Maximum
Pure zinc (Z) 90 (6 µm/side) 600 (42 µm/side)
Zinc-iron (ZF) 90 (6 µm/side) 140 (10 µm/side)
MagiZinc (ZM)1 70 (5 µm/side) 310 (22 µm/side)
Coating weight measured in g/m2 double-sided (µm, per side).
Coils with coatings > 450 g/m2 will be supplied in oscillated coiled condition.
Coils coated with 600 g/m2 are only available in width range 980 to 1300 mm.
For MagiZinc (ZM) coating weights below 100 g/m2 please visit our Automotive catalogue
 

Surface quality

Surface quality complies with standard: EN 10346:2015. Galvanised steels are available in surface quality A, B or C.
For the highest surface quality requirements we also offer Serica FLO®. For more details please visit our Automotive catalogue.

Surface quality A: as coated surface

Imperfections such as pimples, marks, scratches, pits, variations in surface appearance, dark spots, stripe marks and light passivation stains are permissible.
Stretch levelling breaks or run-off marks may appear. Coil breaks and stretcher strains may also appear.

Surface quality B: improved surface

With this surface quality, small imperfections such as stretch levelling breaks, skin pass marks, slight scratches, indentations, surface structure, zinc run-off marks and light passivation stains are permissible.

Surface quality C: best quality surface

For more information on surface quality C please visit our Automotive catalogue.

 

Surface finish

Pure zinc

MA: minimised spangle, as coated surface (Z).
MB: minimised spangle, improved surface (Z).
MC: minimised spangle, best quality surface (Z).

Zinc-iron alloy

A: as coated surface (ZF).
B: improved surface (ZF).
C: best quality surface (ZF).

MagiZinc®

A : as coated surface (ZM).
B : improved surface (ZM).
C: best quality surface (ZM).

 

Surface roughness

Metallic coated steel (with the exception of galvanised steel with standard surface (MA)) can be supplied in various grades of roughness – please contact us for more details. If no roughness is specified, roughness will be as shown in the table below.

Roughness Ra (µm)

 

cut off 0.8mm

cut off 2.5mm

0.6 - 1.9

0.7 - 2.2

 

Surface treatments

The surface treatments available are O, C and CO.

Oiling (O)

The material surface can be oiled with preservative oil. Other types of oil - for increasing strength or reducing weight – are available to help achieve your optimum performance parameters. Please contact us for details.

Tata Steel offers the following range of oiling levels:

Coating type

Capability

Pure zinc (Z)

0.25 - 1.5 g/m2

Zinc-iron (ZF)

0.5 - 1.5 g/m2

MagiZinc® (ZM)

0.25 - 1.5 g/m2

Other oiling levels are available on request.

Chromium-free passivation (C)

This surface treatment temporarily protects the zinc-coated material against white rust during transportation and storage (not applicable to all qualities and dimensions – please contact us for details).

Chromium-free passivation and oiled (CO)

Please request this combination of surface treatments if you require extra protection against white rust formation (not applicable to all qualities and dimensions – please contact us for details).

Untreated (U)

Please contact us regarding the availability of untreated coils.

EN-Engineering-Product-Metallic coated-Forming-DX54D-PropertiesTSE

Properties

Properties


Mechanical properties

Metallic coated steel for forming has the following mechanical properties. These are measured transverse to the rolling direction:

EN 10346: 2015 Grade DX54D+Z DX54D+ZF/+ZM
Yield strength 1 Re N/mm² 120 - 220 120 - 220
Tensile strength Rm N/mm² 260 - 350 260 - 350
Elongation 2 % 36 34
Min. r-value 3   1.6 1.4
Min. n-value   0.18 0.18
1. If the yield point is not pronounced, the values apply to the 0.2% - proof strength Rp0.2 ; if the yield strength is pronounced, the values apply to the lower yield point ReL.
2. Decreased minimum elongation values apply for product thickness t ≤ 0.50 mm (minus 4 units) and for 0.50 mm ≤ t ≤ 0.70 mm (minus 2 units).
Elongation after fracture A uses test piece length L0 = 80 mm.
3. For t > 1.5 mm, the minimum r90 - value reduced by 0.2 applies.
 

Chemical composition

Tata Steel complies with the following cast analysis:

EN 10346: 2015 Grade DX54D+Z/+ZF/+ZM
C Max. 0.12
Mn Max. 0.60
P Max. 0.10
S Max. 0.045
Al Min. -
N Max. -
Ti Max. 0.30
All values are in weight%.

EN-Engineering-Product-Metallic coated-Forming-DX54D-DimensionsTSE

Dimensions

Dimensional capability
 

Galvanised (+Z) products

Dimensions in mm.

Thickness Max. width
From - up to DX54D
0.45 - 0.50 1350
0.50 - 0.55 1520
0.55 - 0.60 1620
0.60 - 0.65 1730
0.65 - 0.70 1870
0.70 - 1.00 1970
1.00 - 1.20 1970
1.20 - 1.30 1940
1.30 - 1.60 1840
1.60 - 1.70 1800
1.70 - 1.80 1750
1.80 - 1.90 1630
1.90 - 2.00 1530
For widths below 900 mm, please contact us.
 

Galvannealed (+ZF) products

Dimensions in mm.

Thickness Max. width
From - up to DX54D
0.50 - 0.60 1420
0.60 - 0.65 1700
0.65 - 1.50 1850
1.50 - 1.60 1830
1.60 - 1.70 1710
1.70 - 1.75 1660
1.75 - 1.80 1620
1.80 - 1.90 1530
1.90 - 2.00 1440
For widths below 900 mm, please contact us.
 

MagiZinc® (+ZM) products

Dimensions in mm.

Thickness Max. width
From - up to DX54D
0.45 - 0.50 1350
0.50 - 0.55 1520
0.55 - 0.60 1620
0.60 - 0.65 1730
0.65 - 0.70 1870
0.70 - 1.00 1970
1.00 - 1.20 1970
1.20 - 1.30 1940
1.30 - 1.60 1840
1.60 - 1.70 1800
1.70 - 1.80 1750
1.80 - 1.90 1630
1.90 - 2.00 1530
For widths below 900 mm, please contact us.
 

Tolerances

Tolerances comply with standard EN 10143 2006.
Tighter tolerances are available, please contact us for details.

EN-EngineeringAutomotive-Product-Metallic Coated-All Grades Shape and Dimensional TolerancesTSE

Shape and dimensional tolerances

Tolerances on thickness

The tolerances comply with standard EN 10143: 2006.
Tighter tolerances are available on request.
Thickness tolerance availability is shown below:

Thickness tolerance

Availability

Full thickness tolerance

Available

Special thickness tolerance

Available

50% of full thickness tolerance

Refer before ordering

 

The following tolerances apply to the grades with a minimum value for the yield strength lower than 260N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

> 0.40

≤ 0.60

± 0.04

± 0.05

± 0.06

± 0.035

± 0.040

± 0.045

> 0.60

≤ 0.80

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.80

≤ 1.00

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 1.00

≤ 1.20

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.20

≤ 1.60

± 0.10

± 0.11

± 0.12

± 0.060

± 0.070

± 0.080

> 1.60

≤ 2.00

± 0.12

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 2.00

≤ 2.50

± 0.14

± 0.15

± 0.16

± 0.090

± 0.100

± 0.110

> 2.50

≤ 3.00

± 0.17

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 3.00

≤ 5.00

± 0.20

± 0.20

± 0.21

± 0.15

± 0.16

± 0.17

> 5.00

≤ 6.50

± 0.22

± 0.22

± 0.23

± 0.17

± 0.18

± 0.19

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 260N/mm² ≤ Rp0.2 < 360N/mm² and for grades DX51D and S550GD.

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.035

± 0.040

-

> 0.40

≤ 0.60

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.60

≤ 0.80

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.80

≤ 1.00

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.00

≤ 1.20

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.20

≤ 1.60

± 0.11

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 1.60

≤ 2.00

± 0.14

± 0.15

± 0.16

± 0.080

± 0.090

± 0.110

> 2.00

≤ 2.50

± 0.16

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 2.50

≤ 3.00

± 0.19

± 0.20

± 0.20

± 0.130

± 0.140

± 0.150

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 360N/mm² ≤ Rp0.2 ≤ 420N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.040

± 0.045

-

> 0.40

≤ 0.60

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.60

≤ 0.80

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.80

≤ 1.00

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.00

≤ 1.20

± 0.10

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.20

≤ 1.60

± 0.13

± 0.14

± 0.16

± 0.080

± 0.090

± 0.110

> 1.60

≤ 2.00

± 0.16

± 0.17

± 0.19

± 0.090

± 0.110

± 0.120

> 2.00

≤ 2.50

± 0.18

± 0.20

± 0.21

± 0.120

± 0.130

± 0.140

> 2.50

≤ 3.00

± 0.22

± 0.22

± 0.23

± 0.140

± 0.150

± 0.160

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 420N/mm² < Rp0.2 ≤ 900N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.06

± 0.07

-

± 0.045

± 0.050

-

> 0.40

≤ 0.60

± 0.06

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.60

≤ 0.80

± 0.07

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 0.80

≤ 1.00

± 0.09

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.00

≤ 1.20

± 0.11

± 0.13

± 0.14

± 0.080

± 0.090

± 0.110

> 1.20

≤ 1.60

± 0.15

± 0.16

± 0.18

± 0.090

± 0.110

± 0.120

> 1.60

≤ 2.00

± 0.18

± 0.19

± 0.21

± 0.110

± 0.120

± 0.140

> 2.00

≤ 2.50

± 0.21

± 0.22

± 0.24

± 0.140

± 0.150

± 0.170

> 2.50

≤ 3.00

± 0.24

± 0.25

± 0.26

± 0.170

± 0.180

± 0.190

> 3.00

≤ 5.00

± 0.26

± 0.27

± 0.28

± 0.23

± 0.24

± 0.26

> 5.00

≤ 6.50

± 0.28

± 0.29

± 0.30

± 0.25

± 0.26

± 0.28

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

Tolerances on width

The tolerances on width comply with standard EN 10143: 2006
MagiZinc is not included in the standard, but fulfils EN 10143: 2006 requirements.
Tighter tolerances are available on request.

Tolerances in mm.

Nominal width w Normal tolerances Special tolerances (S)
600 ≤ w ≤ 1200 + 5
0
+ 2
0
1200 < w ≤ 1500 + 6
0
+ 2
0
1500 < w ≤ 1800 + 7
0
+ 3
0
w > 1800 + 8
0
+ 3
0

 

Dimensions and coil weights

Description Availability
Coil diameter inner 610mm
(508 mm available on request)
Coil diameter outer 10/7 x width max
1000mm min.
2500mm max.
Coil weight 30t max.
33t max available after consultation
Coil weight limited by maximum outer diameter
Maximum weight allowed by road/rail transport
Some products may have different coil weight ranges available
Usually a minimum coil weight up to 85% of the maximum coil weight can be requested
KIM: width ≤ 1200 mm 11.7 - 22.7 kg/mm width
KIM: 1200mm < width ≤ 1700 mm 11.6 - 21.7 kg/mm width
KIM: width > 1700 mm 11.0 kg/mm width and 11.6 - 21.7 kg/mm width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

EN-EngineeringAutomotive-Product-Metallic coated-All grades Further processingTSE

Further processing

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times

Light gauge processing

Processing type Slitting Decoiling Blanking
Thickness range (mm) 0.2 - 7.0 0.3 - 6.0 0.3 - 6.0
Width range (mm) 10 - 2050 50 - 2600 200 - 2600
Length range - up to 6m up to 6m
Locations UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Netherlands

For further information please visit our Service Centre webpages.

 

 

EN-Engineering-Product-Metallic coated-Forming-DX56D+Z/+ZF/+ZM TSE

DX56D+Z/+ZF/+ZM
Specification details for DX56D+Z/+ZF/+ZM

EN-Engineering-Product-Metallic coated-Forming-All Grades OverviewTSE

Overview

Overview

With MagiZinc® you can manufacture lighter products with higher strength thanks to the improved corrosion protection and at the same time increase the production volume and further reduce costs thanks to the better processing properties.
 

Relationship with standards

Metallic coated steel for forming complies with the following European standard
 

EN 10346: 2015

DX51D+Z/+ZF/+ZM

DX52D+Z/+ZF/+ZM

DX53D+Z/+ZF/+ZM

DX54D+Z/+ZF/+ZM

DX56D+Z/+ZF/+ZM

DX57D+Z/+ZM

DX58D+Z 1

1. Not in standard. Tata Steel’s own specification.

EN-Engineering-Product-Metallic coated-All Grades Coatings Surface aspectsTSE

Coatings and surface aspects

Coatings

Three types of metallic coating are available:

Pure zinc

Galvanised steel (+Z) is coated with an almost pure zinc coating (>99% zinc).

Zinc-iron alloy

Galvannealed steel (+ZF) is coated with a zinc coating containing approximately 8-12% iron. 
For further information on our galvannealed products please visit our Automotive catalogue.

MagiZinc

MagiZinc steel (+ZM) is coated with a zinc coating containing additional magnesium and aluminium.
 

Coating weight

Coating Minimum Maximum
Pure zinc (Z) 90 (6 µm/side) 600 (42 µm/side)
Zinc-iron (ZF) 90 (6 µm/side) 140 (10 µm/side)
MagiZinc (ZM)1 70 (5 µm/side) 310 (22 µm/side)
Coating weight measured in g/m2 double-sided (µm, per side).
Coils with coatings > 450 g/m2 will be supplied in oscillated coiled condition.
Coils coated with 600 g/m2 are only available in width range 980 to 1300 mm.
For MagiZinc (ZM) coating weights below 100 g/m2 please visit our Automotive catalogue
 

Surface quality

Surface quality complies with standard: EN 10346:2015. Galvanised steels are available in surface quality A, B or C.
For the highest surface quality requirements we also offer Serica FLO®. For more details please visit our Automotive catalogue.

Surface quality A: as coated surface

Imperfections such as pimples, marks, scratches, pits, variations in surface appearance, dark spots, stripe marks and light passivation stains are permissible.
Stretch levelling breaks or run-off marks may appear. Coil breaks and stretcher strains may also appear.

Surface quality B: improved surface

With this surface quality, small imperfections such as stretch levelling breaks, skin pass marks, slight scratches, indentations, surface structure, zinc run-off marks and light passivation stains are permissible.

Surface quality C: best quality surface

For more information on surface quality C please visit our Automotive catalogue.

 

Surface finish

Pure zinc

MA: minimised spangle, as coated surface (Z).
MB: minimised spangle, improved surface (Z).
MC: minimised spangle, best quality surface (Z).

Zinc-iron alloy

A: as coated surface (ZF).
B: improved surface (ZF).
C: best quality surface (ZF).

MagiZinc®

A : as coated surface (ZM).
B : improved surface (ZM).
C: best quality surface (ZM).

 

Surface roughness

Metallic coated steel (with the exception of galvanised steel with standard surface (MA)) can be supplied in various grades of roughness – please contact us for more details. If no roughness is specified, roughness will be as shown in the table below.

Roughness Ra (µm)

 

cut off 0.8mm

cut off 2.5mm

0.6 - 1.9

0.7 - 2.2

 

Surface treatments

The surface treatments available are O, C and CO.

Oiling (O)

The material surface can be oiled with preservative oil. Other types of oil - for increasing strength or reducing weight – are available to help achieve your optimum performance parameters. Please contact us for details.

Tata Steel offers the following range of oiling levels:

Coating type

Capability

Pure zinc (Z)

0.25 - 1.5 g/m2

Zinc-iron (ZF)

0.5 - 1.5 g/m2

MagiZinc® (ZM)

0.25 - 1.5 g/m2

Other oiling levels are available on request.

Chromium-free passivation (C)

This surface treatment temporarily protects the zinc-coated material against white rust during transportation and storage (not applicable to all qualities and dimensions – please contact us for details).

Chromium-free passivation and oiled (CO)

Please request this combination of surface treatments if you require extra protection against white rust formation (not applicable to all qualities and dimensions – please contact us for details).

Untreated (U)

Please contact us regarding the availability of untreated coils.

EN-Engineering-Product-Metallic coated-Forming-DX56D-PropertiesTSE

Properties

Properties


Mechanical properties

Metallic coated steel for forming has the following mechanical properties. These are measured transverse to the rolling direction:

EN 10346: 2015 Grade DX56D+Z DX56D+ZF/+ZM
Yield strength 1 Re N/mm² 120 - 180 120 - 180
Tensile strength Rm N/mm² 260 - 350 260 - 350
Elongation 2 % 39 37
Min. r-value 3   1.9 1.7 4
Min. n-value   0.21 0.20 4
1. If the yield point is not pronounced, the values apply to the 0.2% - proof strength Rp0.2 ; if the yield strength is pronounced, the values apply to the lower yield point ReL.
2. Decreased minimum elongation values apply for product thickness t ≤ 0.50 mm (minus 4 units) and for 0.50 mm ≤ t ≤ 0.70 mm (minus 2 units).
Elongation after fraction A uses test piece length L0 = 80 mm.
3. For t > 1.5 mm, the minimum r90 - value reduced by 0.2 applies.
4. For t ≤ 0.70 mm, the minimum r90 - value reduced by 0.2 and minimum n90- value reduced by 0.01 apply.
 

Chemical composition

Tata Steel complies with the following cast analysis:

EN 10346: 2015 Grade DX56D+Z/+ZF/+ZM
C Max. 0.12
Mn Max. 0.60
P Max. 0.10
S Max. 0.045
Al Min. -
N Max. -
Ti Max. 0.30
All values are in weight%.

EN-Engineering-Product-Metallic coated-Forming-DX56D-DimensionsTSE

Dimensions

Dimensional capability
 

Galvanised (+Z) products

Dimensions in mm.

Thickness Max. width
From - up to DX56D
0.45 - 0.50 1350
0.50 - 0.55 1500
0.55 - 0.60 1620
0.60 - 0.65 1730
0.65 - 0.70 1870
0.70 - 1.20 1970
1.20 - 1.30 1940
1.30 - 1.60 1840
1.60 - 1.70 1800
1.70 - 1.80 1720
1.80 - 1.90 1630
1.90 - 2.00 1530
For widths below 900 mm, please contact us.
 

Galvannealed (+ZF) products

Dimensions in mm.

Thickness Max. width
From - up to DX56D
0.50 - 0.60 1420
0.60 - 0.65 1700
0.65 - 1.45 1850
1.45 - 1.50 1800
1.50 - 1.60 1700
1.60 - 1.70 1600
1.70 - 1.75 1550
For widths below 900 mm, please contact us.
 

MagiZinc® (+ZM) products

Dimensions in mm.

Thickness Max. width
From - up to DX56D
0.45 - 0.50 1350
0.50 - 0.55 1500
0.55 - 0.60 1620
0.60 - 0.65 1730
0.65 - 0.70 1870
0.70 - 1.20 1970
1.20 - 1.30 1940
1.30 - 1.60 1840
1.60 - 1.70 1800
1.70 - 1.80 1720
1.80 - 1.90 1630
1.90 - 2.00 1530
For widths below 900 mm, please contact us.

 

Tolerances

Tolerances comply with standard EN 10143 2006.
Tighter tolerances are available, please contact us for details.

EN-EngineeringAutomotive-Product-Metallic Coated-All Grades Shape and Dimensional TolerancesTSE

Shape and dimensional tolerances

Tolerances on thickness

The tolerances comply with standard EN 10143: 2006.
Tighter tolerances are available on request.
Thickness tolerance availability is shown below:

Thickness tolerance

Availability

Full thickness tolerance

Available

Special thickness tolerance

Available

50% of full thickness tolerance

Refer before ordering

 

The following tolerances apply to the grades with a minimum value for the yield strength lower than 260N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

> 0.40

≤ 0.60

± 0.04

± 0.05

± 0.06

± 0.035

± 0.040

± 0.045

> 0.60

≤ 0.80

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.80

≤ 1.00

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 1.00

≤ 1.20

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.20

≤ 1.60

± 0.10

± 0.11

± 0.12

± 0.060

± 0.070

± 0.080

> 1.60

≤ 2.00

± 0.12

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 2.00

≤ 2.50

± 0.14

± 0.15

± 0.16

± 0.090

± 0.100

± 0.110

> 2.50

≤ 3.00

± 0.17

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 3.00

≤ 5.00

± 0.20

± 0.20

± 0.21

± 0.15

± 0.16

± 0.17

> 5.00

≤ 6.50

± 0.22

± 0.22

± 0.23

± 0.17

± 0.18

± 0.19

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 260N/mm² ≤ Rp0.2 < 360N/mm² and for grades DX51D and S550GD.

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.035

± 0.040

-

> 0.40

≤ 0.60

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.60

≤ 0.80

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.80

≤ 1.00

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.00

≤ 1.20

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.20

≤ 1.60

± 0.11

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 1.60

≤ 2.00

± 0.14

± 0.15

± 0.16

± 0.080

± 0.090

± 0.110

> 2.00

≤ 2.50

± 0.16

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 2.50

≤ 3.00

± 0.19

± 0.20

± 0.20

± 0.130

± 0.140

± 0.150

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 360N/mm² ≤ Rp0.2 ≤ 420N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.040

± 0.045

-

> 0.40

≤ 0.60

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.60

≤ 0.80

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.80

≤ 1.00

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.00

≤ 1.20

± 0.10

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.20

≤ 1.60

± 0.13

± 0.14

± 0.16

± 0.080

± 0.090

± 0.110

> 1.60

≤ 2.00

± 0.16

± 0.17

± 0.19

± 0.090

± 0.110

± 0.120

> 2.00

≤ 2.50

± 0.18

± 0.20

± 0.21

± 0.120

± 0.130

± 0.140

> 2.50

≤ 3.00

± 0.22

± 0.22

± 0.23

± 0.140

± 0.150

± 0.160

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 420N/mm² < Rp0.2 ≤ 900N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.06

± 0.07

-

± 0.045

± 0.050

-

> 0.40

≤ 0.60

± 0.06

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.60

≤ 0.80

± 0.07

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 0.80

≤ 1.00

± 0.09

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.00

≤ 1.20

± 0.11

± 0.13

± 0.14

± 0.080

± 0.090

± 0.110

> 1.20

≤ 1.60

± 0.15

± 0.16

± 0.18

± 0.090

± 0.110

± 0.120

> 1.60

≤ 2.00

± 0.18

± 0.19

± 0.21

± 0.110

± 0.120

± 0.140

> 2.00

≤ 2.50

± 0.21

± 0.22

± 0.24

± 0.140

± 0.150

± 0.170

> 2.50

≤ 3.00

± 0.24

± 0.25

± 0.26

± 0.170

± 0.180

± 0.190

> 3.00

≤ 5.00

± 0.26

± 0.27

± 0.28

± 0.23

± 0.24

± 0.26

> 5.00

≤ 6.50

± 0.28

± 0.29

± 0.30

± 0.25

± 0.26

± 0.28

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

Tolerances on width

The tolerances on width comply with standard EN 10143: 2006
MagiZinc is not included in the standard, but fulfils EN 10143: 2006 requirements.
Tighter tolerances are available on request.

Tolerances in mm.

Nominal width w Normal tolerances Special tolerances (S)
600 ≤ w ≤ 1200 + 5
0
+ 2
0
1200 < w ≤ 1500 + 6
0
+ 2
0
1500 < w ≤ 1800 + 7
0
+ 3
0
w > 1800 + 8
0
+ 3
0

 

Dimensions and coil weights

Description Availability
Coil diameter inner 610mm
(508 mm available on request)
Coil diameter outer 10/7 x width max
1000mm min.
2500mm max.
Coil weight 30t max.
33t max available after consultation
Coil weight limited by maximum outer diameter
Maximum weight allowed by road/rail transport
Some products may have different coil weight ranges available
Usually a minimum coil weight up to 85% of the maximum coil weight can be requested
KIM: width ≤ 1200 mm 11.7 - 22.7 kg/mm width
KIM: 1200mm < width ≤ 1700 mm 11.6 - 21.7 kg/mm width
KIM: width > 1700 mm 11.0 kg/mm width and 11.6 - 21.7 kg/mm width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

EN-EngineeringAutomotive-Product-Metallic coated-All grades Further processingTSE

Further processing

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times

Light gauge processing

Processing type Slitting Decoiling Blanking
Thickness range (mm) 0.2 - 7.0 0.3 - 6.0 0.3 - 6.0
Width range (mm) 10 - 2050 50 - 2600 200 - 2600
Length range - up to 6m up to 6m
Locations UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Netherlands

For further information please visit our Service Centre webpages.

 

 

EN-Engineering-Product-Metallic coated-Forming-DX57D+Z/+ZM TSE

DX57D+Z/+ZM
Specification details for DX57D+Z/+ZM

EN-Engineering-Product-Metallic coated-Forming-All Grades OverviewTSE

Overview

Overview

With MagiZinc® you can manufacture lighter products with higher strength thanks to the improved corrosion protection and at the same time increase the production volume and further reduce costs thanks to the better processing properties.
 

Relationship with standards

Metallic coated steel for forming complies with the following European standard
 

EN 10346: 2015

DX51D+Z/+ZF/+ZM

DX52D+Z/+ZF/+ZM

DX53D+Z/+ZF/+ZM

DX54D+Z/+ZF/+ZM

DX56D+Z/+ZF/+ZM

DX57D+Z/+ZM

DX58D+Z 1

1. Not in standard. Tata Steel’s own specification.

EN-Engineering-Product-Metallic coated-All Grades Coatings Surface aspectsTSE

Coatings and surface aspects

Coatings

Three types of metallic coating are available:

Pure zinc

Galvanised steel (+Z) is coated with an almost pure zinc coating (>99% zinc).

Zinc-iron alloy

Galvannealed steel (+ZF) is coated with a zinc coating containing approximately 8-12% iron. 
For further information on our galvannealed products please visit our Automotive catalogue.

MagiZinc

MagiZinc steel (+ZM) is coated with a zinc coating containing additional magnesium and aluminium.
 

Coating weight

Coating Minimum Maximum
Pure zinc (Z) 90 (6 µm/side) 600 (42 µm/side)
Zinc-iron (ZF) 90 (6 µm/side) 140 (10 µm/side)
MagiZinc (ZM)1 70 (5 µm/side) 310 (22 µm/side)
Coating weight measured in g/m2 double-sided (µm, per side).
Coils with coatings > 450 g/m2 will be supplied in oscillated coiled condition.
Coils coated with 600 g/m2 are only available in width range 980 to 1300 mm.
For MagiZinc (ZM) coating weights below 100 g/m2 please visit our Automotive catalogue
 

Surface quality

Surface quality complies with standard: EN 10346:2015. Galvanised steels are available in surface quality A, B or C.
For the highest surface quality requirements we also offer Serica FLO®. For more details please visit our Automotive catalogue.

Surface quality A: as coated surface

Imperfections such as pimples, marks, scratches, pits, variations in surface appearance, dark spots, stripe marks and light passivation stains are permissible.
Stretch levelling breaks or run-off marks may appear. Coil breaks and stretcher strains may also appear.

Surface quality B: improved surface

With this surface quality, small imperfections such as stretch levelling breaks, skin pass marks, slight scratches, indentations, surface structure, zinc run-off marks and light passivation stains are permissible.

Surface quality C: best quality surface

For more information on surface quality C please visit our Automotive catalogue.

 

Surface finish

Pure zinc

MA: minimised spangle, as coated surface (Z).
MB: minimised spangle, improved surface (Z).
MC: minimised spangle, best quality surface (Z).

Zinc-iron alloy

A: as coated surface (ZF).
B: improved surface (ZF).
C: best quality surface (ZF).

MagiZinc®

A : as coated surface (ZM).
B : improved surface (ZM).
C: best quality surface (ZM).

 

Surface roughness

Metallic coated steel (with the exception of galvanised steel with standard surface (MA)) can be supplied in various grades of roughness – please contact us for more details. If no roughness is specified, roughness will be as shown in the table below.

Roughness Ra (µm)

 

cut off 0.8mm

cut off 2.5mm

0.6 - 1.9

0.7 - 2.2

 

Surface treatments

The surface treatments available are O, C and CO.

Oiling (O)

The material surface can be oiled with preservative oil. Other types of oil - for increasing strength or reducing weight – are available to help achieve your optimum performance parameters. Please contact us for details.

Tata Steel offers the following range of oiling levels:

Coating type

Capability

Pure zinc (Z)

0.25 - 1.5 g/m2

Zinc-iron (ZF)

0.5 - 1.5 g/m2

MagiZinc® (ZM)

0.25 - 1.5 g/m2

Other oiling levels are available on request.

Chromium-free passivation (C)

This surface treatment temporarily protects the zinc-coated material against white rust during transportation and storage (not applicable to all qualities and dimensions – please contact us for details).

Chromium-free passivation and oiled (CO)

Please request this combination of surface treatments if you require extra protection against white rust formation (not applicable to all qualities and dimensions – please contact us for details).

Untreated (U)

Please contact us regarding the availability of untreated coils.

EN-Engineering-Product-Metallic coated-Forming-DX57D-PropertiesTSE

Properties

Properties


Mechanical properties

Metallic coated steel for forming has the following mechanical properties. These are measured transverse to the rolling direction:

EN 10346: 2015 Grade DX57D+Z DX57D+ZM
Yield strength 1 Re N/mm² 120 - 170 120 - 170
Tensile strength Rm N/mm² 260 - 350 260 - 350
Elongation 2 % 41 39
Min. r-value 3   2.1 1.9 4
Min. n-value   0.22 0.21 4
1. If the yield point is not pronounced, the values apply to the 0.2% - proof strength Rp0.2 ; if the yield strength is pronounced, the values apply to the lower yield point ReL.
2. Decreased minimum elongation values apply for product thickness t ≤ 0.50 mm (minus 4 units) and for 0.50 mm ≤ t ≤ 0.70 mm (minus 2 units).
Elongation after fraction A uses test piece length L0 = 80 mm.
3. For t > 1.5 mm, the minimum r90 - value reduced by 0.2 applies.
4. For t ≤ 0.70 mm, the minimum r90 - value reduced by 0.2 and minimum n90- value reduced by 0.01 apply.
 

Chemical composition

Tata Steel complies with the following cast analysis:

EN 10346: 2015 Grade DX57D+Z/+ZM
C Max. 0.12
Mn Max. 0.60
P Max. 0.10
S Max. 0.045
Al Min. -
N Max. -
Ti Max. 0.30
All values are in weight%.

EN-Engineering-Product-Metallic coated-Forming-DX57D-DimensionsTSE

Dimensions

Dimensional capability
 

Galvanised (+Z) products

Dimensions in mm.

Thickness Max. width
From - up to DX57D 
0.50 - 0.55 1470
0.55 - 0.60 1590
0.60 - 0.65 1710
0.65 - 0.70 1840
0.70 - 0.75 1870
0.75 - 0.80 1900
0.80 - 0.90 1800
0.90 - 1.00 1750
1.00 - 1.10 1600
1.10 - 1.20 1500
For widths below 900 mm, please contact us.
 

MagiZinc® (+ZM) products

For the dimensions of DX57D+ZM, please contact us.
 

Tolerances

Tolerances comply with standard EN 10143 2006.
Tighter tolerances are available, please contact us for details.

EN-EngineeringAutomotive-Product-Metallic Coated-All Grades Shape and Dimensional TolerancesTSE

Shape and dimensional tolerances

Tolerances on thickness

The tolerances comply with standard EN 10143: 2006.
Tighter tolerances are available on request.
Thickness tolerance availability is shown below:

Thickness tolerance

Availability

Full thickness tolerance

Available

Special thickness tolerance

Available

50% of full thickness tolerance

Refer before ordering

 

The following tolerances apply to the grades with a minimum value for the yield strength lower than 260N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

> 0.40

≤ 0.60

± 0.04

± 0.05

± 0.06

± 0.035

± 0.040

± 0.045

> 0.60

≤ 0.80

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.80

≤ 1.00

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 1.00

≤ 1.20

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.20

≤ 1.60

± 0.10

± 0.11

± 0.12

± 0.060

± 0.070

± 0.080

> 1.60

≤ 2.00

± 0.12

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 2.00

≤ 2.50

± 0.14

± 0.15

± 0.16

± 0.090

± 0.100

± 0.110

> 2.50

≤ 3.00

± 0.17

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 3.00

≤ 5.00

± 0.20

± 0.20

± 0.21

± 0.15

± 0.16

± 0.17

> 5.00

≤ 6.50

± 0.22

± 0.22

± 0.23

± 0.17

± 0.18

± 0.19

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 260N/mm² ≤ Rp0.2 < 360N/mm² and for grades DX51D and S550GD.

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.035

± 0.040

-

> 0.40

≤ 0.60

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.60

≤ 0.80

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.80

≤ 1.00

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.00

≤ 1.20

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.20

≤ 1.60

± 0.11

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 1.60

≤ 2.00

± 0.14

± 0.15

± 0.16

± 0.080

± 0.090

± 0.110

> 2.00

≤ 2.50

± 0.16

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 2.50

≤ 3.00

± 0.19

± 0.20

± 0.20

± 0.130

± 0.140

± 0.150

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 360N/mm² ≤ Rp0.2 ≤ 420N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.040

± 0.045

-

> 0.40

≤ 0.60

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.60

≤ 0.80

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.80

≤ 1.00

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.00

≤ 1.20

± 0.10

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.20

≤ 1.60

± 0.13

± 0.14

± 0.16

± 0.080

± 0.090

± 0.110

> 1.60

≤ 2.00

± 0.16

± 0.17

± 0.19

± 0.090

± 0.110

± 0.120

> 2.00

≤ 2.50

± 0.18

± 0.20

± 0.21

± 0.120

± 0.130

± 0.140

> 2.50

≤ 3.00

± 0.22

± 0.22

± 0.23

± 0.140

± 0.150

± 0.160

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 420N/mm² < Rp0.2 ≤ 900N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.06

± 0.07

-

± 0.045

± 0.050

-

> 0.40

≤ 0.60

± 0.06

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.60

≤ 0.80

± 0.07

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 0.80

≤ 1.00

± 0.09

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.00

≤ 1.20

± 0.11

± 0.13

± 0.14

± 0.080

± 0.090

± 0.110

> 1.20

≤ 1.60

± 0.15

± 0.16

± 0.18

± 0.090

± 0.110

± 0.120

> 1.60

≤ 2.00

± 0.18

± 0.19

± 0.21

± 0.110

± 0.120

± 0.140

> 2.00

≤ 2.50

± 0.21

± 0.22

± 0.24

± 0.140

± 0.150

± 0.170

> 2.50

≤ 3.00

± 0.24

± 0.25

± 0.26

± 0.170

± 0.180

± 0.190

> 3.00

≤ 5.00

± 0.26

± 0.27

± 0.28

± 0.23

± 0.24

± 0.26

> 5.00

≤ 6.50

± 0.28

± 0.29

± 0.30

± 0.25

± 0.26

± 0.28

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

Tolerances on width

The tolerances on width comply with standard EN 10143: 2006
MagiZinc is not included in the standard, but fulfils EN 10143: 2006 requirements.
Tighter tolerances are available on request.

Tolerances in mm.

Nominal width w Normal tolerances Special tolerances (S)
600 ≤ w ≤ 1200 + 5
0
+ 2
0
1200 < w ≤ 1500 + 6
0
+ 2
0
1500 < w ≤ 1800 + 7
0
+ 3
0
w > 1800 + 8
0
+ 3
0

 

Dimensions and coil weights

Description Availability
Coil diameter inner 610mm
(508 mm available on request)
Coil diameter outer 10/7 x width max
1000mm min.
2500mm max.
Coil weight 30t max.
33t max available after consultation
Coil weight limited by maximum outer diameter
Maximum weight allowed by road/rail transport
Some products may have different coil weight ranges available
Usually a minimum coil weight up to 85% of the maximum coil weight can be requested
KIM: width ≤ 1200 mm 11.7 - 22.7 kg/mm width
KIM: 1200mm < width ≤ 1700 mm 11.6 - 21.7 kg/mm width
KIM: width > 1700 mm 11.0 kg/mm width and 11.6 - 21.7 kg/mm width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

EN-EngineeringAutomotive-Product-Metallic coated-All grades Further processingTSE

Further processing

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times

Light gauge processing

Processing type Slitting Decoiling Blanking
Thickness range (mm) 0.2 - 7.0 0.3 - 6.0 0.3 - 6.0
Width range (mm) 10 - 2050 50 - 2600 200 - 2600
Length range - up to 6m up to 6m
Locations UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Netherlands

For further information please visit our Service Centre webpages.

 

 

EN-Engineering-Product-Metallic coated-Forming-DX58D+Z TSN

DX58D+Z
Specification details for DX58D+Z

EN-Engineering-Product-Metallic coated-Forming-All Grades OverviewTSE

Overview

Overview

With MagiZinc® you can manufacture lighter products with higher strength thanks to the improved corrosion protection and at the same time increase the production volume and further reduce costs thanks to the better processing properties.
 

Relationship with standards

Metallic coated steel for forming complies with the following European standard
 

EN 10346: 2015

DX51D+Z/+ZF/+ZM

DX52D+Z/+ZF/+ZM

DX53D+Z/+ZF/+ZM

DX54D+Z/+ZF/+ZM

DX56D+Z/+ZF/+ZM

DX57D+Z/+ZM

DX58D+Z 1

1. Not in standard. Tata Steel’s own specification.

EN-Engineering-Product-Metallic coated-All Grades Coatings Surface aspectsTSE

Coatings and surface aspects

Coatings

Three types of metallic coating are available:

Pure zinc

Galvanised steel (+Z) is coated with an almost pure zinc coating (>99% zinc).

Zinc-iron alloy

Galvannealed steel (+ZF) is coated with a zinc coating containing approximately 8-12% iron. 
For further information on our galvannealed products please visit our Automotive catalogue.

MagiZinc

MagiZinc steel (+ZM) is coated with a zinc coating containing additional magnesium and aluminium.
 

Coating weight

Coating Minimum Maximum
Pure zinc (Z) 90 (6 µm/side) 600 (42 µm/side)
Zinc-iron (ZF) 90 (6 µm/side) 140 (10 µm/side)
MagiZinc (ZM)1 70 (5 µm/side) 310 (22 µm/side)
Coating weight measured in g/m2 double-sided (µm, per side).
Coils with coatings > 450 g/m2 will be supplied in oscillated coiled condition.
Coils coated with 600 g/m2 are only available in width range 980 to 1300 mm.
For MagiZinc (ZM) coating weights below 100 g/m2 please visit our Automotive catalogue
 

Surface quality

Surface quality complies with standard: EN 10346:2015. Galvanised steels are available in surface quality A, B or C.
For the highest surface quality requirements we also offer Serica FLO®. For more details please visit our Automotive catalogue.

Surface quality A: as coated surface

Imperfections such as pimples, marks, scratches, pits, variations in surface appearance, dark spots, stripe marks and light passivation stains are permissible.
Stretch levelling breaks or run-off marks may appear. Coil breaks and stretcher strains may also appear.

Surface quality B: improved surface

With this surface quality, small imperfections such as stretch levelling breaks, skin pass marks, slight scratches, indentations, surface structure, zinc run-off marks and light passivation stains are permissible.

Surface quality C: best quality surface

For more information on surface quality C please visit our Automotive catalogue.

 

Surface finish

Pure zinc

MA: minimised spangle, as coated surface (Z).
MB: minimised spangle, improved surface (Z).
MC: minimised spangle, best quality surface (Z).

Zinc-iron alloy

A: as coated surface (ZF).
B: improved surface (ZF).
C: best quality surface (ZF).

MagiZinc®

A : as coated surface (ZM).
B : improved surface (ZM).
C: best quality surface (ZM).

 

Surface roughness

Metallic coated steel (with the exception of galvanised steel with standard surface (MA)) can be supplied in various grades of roughness – please contact us for more details. If no roughness is specified, roughness will be as shown in the table below.

Roughness Ra (µm)

 

cut off 0.8mm

cut off 2.5mm

0.6 - 1.9

0.7 - 2.2

 

Surface treatments

The surface treatments available are O, C and CO.

Oiling (O)

The material surface can be oiled with preservative oil. Other types of oil - for increasing strength or reducing weight – are available to help achieve your optimum performance parameters. Please contact us for details.

Tata Steel offers the following range of oiling levels:

Coating type

Capability

Pure zinc (Z)

0.25 - 1.5 g/m2

Zinc-iron (ZF)

0.5 - 1.5 g/m2

MagiZinc® (ZM)

0.25 - 1.5 g/m2

Other oiling levels are available on request.

Chromium-free passivation (C)

This surface treatment temporarily protects the zinc-coated material against white rust during transportation and storage (not applicable to all qualities and dimensions – please contact us for details).

Chromium-free passivation and oiled (CO)

Please request this combination of surface treatments if you require extra protection against white rust formation (not applicable to all qualities and dimensions – please contact us for details).

Untreated (U)

Please contact us regarding the availability of untreated coils.

EN-Engineering-Product-Metallic coated-Forming-DX58D-PropertiesTSN

Properties

Properties


Mechanical properties

Metallic coated steel for forming has the following mechanical properties. These are measured transverse to the rolling direction.
Not in EN 10346: 2015. Tata Steel’s own specification.

Tata Steel Grade DX58D+Z
Yield strength 1 Re N/mm² 120 - 155
Tensile strength Rm N/mm² 260 - 310
Elongation 2 % 43
Min. r-value   2.30
Min. n-value   0.225
1. If the yield point is not pronounced, the values apply to the 0.2% - proof strength Rp0.2 ; if the yield strength is pronounced, the values apply to the lower yield point ReL.
2. Decreased minimum elongation values apply for product thickness t ≤ 0.50mm (minus 4 units) and for 0.50mm ≤ t ≤ 0.70mm (minus 2 units).
Elongation after fraction A uses test piece length L0 = 80 mm.
 

Chemical composition

Tata Steel complies with the following cast analysis:
 

Tata Steel Grade DX58D
C Max. 0.12
Mn Max. 0.60
P Max. 0.10
S Max. 0.045
Al Min. -
N Max. -
Ti Max. 0.30
All values are in weight%.

EN-Engineering-Product-Metallic coated-Forming-DX58D-DimensionsTSN

Dimensions

Dimensional capability
 

Galvanised (+Z) products

Dimensions in mm.

Thickness Max. width
From - up to DX58D
0.65 - 1.00 1820
For widths below 900 mm, please contact us.
 

Tolerances

Tolerances comply with standard EN 10143 2006.
Tighter tolerances are available, please contact us for details.

EN-EngineeringAutomotive-Product-Metallic Coated-All Grades Shape and Dimensional TolerancesTSE

Shape and dimensional tolerances

Tolerances on thickness

The tolerances comply with standard EN 10143: 2006.
Tighter tolerances are available on request.
Thickness tolerance availability is shown below:

Thickness tolerance

Availability

Full thickness tolerance

Available

Special thickness tolerance

Available

50% of full thickness tolerance

Refer before ordering

 

The following tolerances apply to the grades with a minimum value for the yield strength lower than 260N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

> 0.40

≤ 0.60

± 0.04

± 0.05

± 0.06

± 0.035

± 0.040

± 0.045

> 0.60

≤ 0.80

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.80

≤ 1.00

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 1.00

≤ 1.20

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.20

≤ 1.60

± 0.10

± 0.11

± 0.12

± 0.060

± 0.070

± 0.080

> 1.60

≤ 2.00

± 0.12

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 2.00

≤ 2.50

± 0.14

± 0.15

± 0.16

± 0.090

± 0.100

± 0.110

> 2.50

≤ 3.00

± 0.17

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 3.00

≤ 5.00

± 0.20

± 0.20

± 0.21

± 0.15

± 0.16

± 0.17

> 5.00

≤ 6.50

± 0.22

± 0.22

± 0.23

± 0.17

± 0.18

± 0.19

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 260N/mm² ≤ Rp0.2 < 360N/mm² and for grades DX51D and S550GD.

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.035

± 0.040

-

> 0.40

≤ 0.60

± 0.05

± 0.06

± 0.07

± 0.040

± 0.045

± 0.050

> 0.60

≤ 0.80

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.80

≤ 1.00

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 1.00

≤ 1.20

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.20

≤ 1.60

± 0.11

± 0.13

± 0.14

± 0.070

± 0.080

± 0.090

> 1.60

≤ 2.00

± 0.14

± 0.15

± 0.16

± 0.080

± 0.090

± 0.110

> 2.00

≤ 2.50

± 0.16

± 0.17

± 0.18

± 0.110

± 0.120

± 0.130

> 2.50

≤ 3.00

± 0.19

± 0.20

± 0.20

± 0.130

± 0.140

± 0.150

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 360N/mm² ≤ Rp0.2 ≤ 420N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.05

± 0.06

-

± 0.040

± 0.045

-

> 0.40

≤ 0.60

± 0.06

± 0.07

± 0.08

± 0.045

± 0.050

± 0.060

> 0.60

≤ 0.80

± 0.07

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.80

≤ 1.00

± 0.08

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 1.00

≤ 1.20

± 0.10

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.20

≤ 1.60

± 0.13

± 0.14

± 0.16

± 0.080

± 0.090

± 0.110

> 1.60

≤ 2.00

± 0.16

± 0.17

± 0.19

± 0.090

± 0.110

± 0.120

> 2.00

≤ 2.50

± 0.18

± 0.20

± 0.21

± 0.120

± 0.130

± 0.140

> 2.50

≤ 3.00

± 0.22

± 0.22

± 0.23

± 0.140

± 0.150

± 0.160

> 3.00

≤ 5.00

± 0.22

± 0.24

± 0.25

± 0.17

± 0.18

± 0.19

> 5.00

≤ 6.50

± 0.24

± 0.25

± 0.26

± 0.19

± 0.20

± 0.21

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

The following tolerances apply to the steel grades with a minimum value for the yield strength 420N/mm² < Rp0.2 ≤ 900N/mm².

Nominal
thickness

Normal tolerances for a nominal width of 1 2

Special tolerances (S) for a
nominal width of 1 2

 

≤ 1200

> 1200

> 1500

≤ 1200

> 1200

> 1500

 

≤ 1500

 

 

≤ 1500

 

≥ 0.35

≤ 0.40

± 0.06

± 0.07

-

± 0.045

± 0.050

-

> 0.40

≤ 0.60

± 0.06

± 0.08

± 0.09

± 0.050

± 0.060

± 0.070

> 0.60

≤ 0.80

± 0.07

± 0.09

± 0.11

± 0.060

± 0.070

± 0.080

> 0.80

≤ 1.00

± 0.09

± 0.11

± 0.12

± 0.070

± 0.080

± 0.090

> 1.00

≤ 1.20

± 0.11

± 0.13

± 0.14

± 0.080

± 0.090

± 0.110

> 1.20

≤ 1.60

± 0.15

± 0.16

± 0.18

± 0.090

± 0.110

± 0.120

> 1.60

≤ 2.00

± 0.18

± 0.19

± 0.21

± 0.110

± 0.120

± 0.140

> 2.00

≤ 2.50

± 0.21

± 0.22

± 0.24

± 0.140

± 0.150

± 0.170

> 2.50

≤ 3.00

± 0.24

± 0.25

± 0.26

± 0.170

± 0.180

± 0.190

> 3.00

≤ 5.00

± 0.26

± 0.27

± 0.28

± 0.23

± 0.24

± 0.26

> 5.00

≤ 6.50

± 0.28

± 0.29

± 0.30

± 0.25

± 0.26

± 0.28

1. Around cold-rolled welds an increase of 20% at the most over the thickness tolerance is allowed
   over a length of 15 metres.
2. For zinc coatings ≥ Z450 the tolerance on the thickness must be raised by 0.02mm.

 

Tolerances on width

The tolerances on width comply with standard EN 10143: 2006
MagiZinc is not included in the standard, but fulfils EN 10143: 2006 requirements.
Tighter tolerances are available on request.

Tolerances in mm.

Nominal width w Normal tolerances Special tolerances (S)
600 ≤ w ≤ 1200 + 5
0
+ 2
0
1200 < w ≤ 1500 + 6
0
+ 2
0
1500 < w ≤ 1800 + 7
0
+ 3
0
w > 1800 + 8
0
+ 3
0

 

Dimensions and coil weights

Description Availability
Coil diameter inner 610mm
(508 mm available on request)
Coil diameter outer 10/7 x width max
1000mm min.
2500mm max.
Coil weight 30t max.
33t max available after consultation
Coil weight limited by maximum outer diameter
Maximum weight allowed by road/rail transport
Some products may have different coil weight ranges available
Usually a minimum coil weight up to 85% of the maximum coil weight can be requested
KIM: width ≤ 1200 mm 11.7 - 22.7 kg/mm width
KIM: 1200mm < width ≤ 1700 mm 11.6 - 21.7 kg/mm width
KIM: width > 1700 mm 11.0 kg/mm width and 11.6 - 21.7 kg/mm width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

EN-EngineeringAutomotive-Product-Metallic coated-All grades Further processingTSE

Further processing

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times

Light gauge processing

Processing type Slitting Decoiling Blanking
Thickness range (mm) 0.2 - 7.0 0.3 - 6.0 0.3 - 6.0
Width range (mm) 10 - 2050 50 - 2600 200 - 2600
Length range - up to 6m up to 6m
Locations UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Netherlands

For further information please visit our Service Centre webpages.