Naantali Steel Service Centre Oy is Finland’s leading steel service centre.
Its large production capacity and storage facilities, coupled with strong logistics connections, enable it to offer an efficient and fast service in Finland and the Baltics. The company has over 22,000 m2 of processing and storage space in Naantali.
Naantali’s customers operate in sectors including the HVAC industry, electrical equipment manufacturing, IT and electronics manufacturing, the construction sector, shipbuilding, lighting, agricultural equipment and domestic appliances.
Naantali Steel Service Centre’s product range includes Hot-dip galvanised, Cold-rolled, Pre-finished, Hot-rolled and Electro-galvanised steel.

‘Our customers use our products for manufacturing a variety of different components as well as end-products including ventilation ducts, cable racks, light fittings, silos, conveyors, cabin modules, refrigeration equipment and roofing products. Over 90% of our customers are located in Finland,’ reports Ilpo Maaranen, General Manager of Naantali Steel Service Centre.
The steel, supplied from Tata Steel’s manufacturing facilities in Europe and from quality third party producers, is delivered to the service centre mostly in coil form. Naantali Steel Service Centre then uses its eight processing lines to produce steel blanks and narrow coils in precise dimensions according to customer requirements. These production lines include four cut-to-length lines, three slitting lines and one recoiling line.
‘Our strengths include the range of processing facilities and our experienced and capable team, this helps ensure we keep quality levels high and deliveries are fast and reliable. Many of our customer relationships are long-term,’ Mr Maaranen reports.
Steel products are processed according to tight dimensional tolerances. Sheets are suitable for automated storage and machine tools equipped with sheet processing equipment. The material dimensions processed at Naantali can range from 0.4mm to 6mm in thickness in sheet lengths as high as 12 metres. Thicker hot-rolled and pickled cut length sheets are also a key part of the local inventory.
The short delivery times are partly due to Naantali’s extensive storage capacity. Steel is stored in our warehouses according to customer requirements, so products can be processed quickly as soon as they are needed. Meanwhile, our standard sizes service, offers delivery of sheet steel and hot-rolled products in set dimensions in 1 to 2 working days.
In addition, the well designed, clean, tidy storage facilities play a key part in ensuring that steel quality is not compromised at any point during the storage and production processes. The service centre puts great emphasis on maintaining rigorous work safety standards and procedures at all times.
The service centre began operations in Naantali as a steel warehouse in 1972. It has previously been owned by various companies, including Kesko and Rautaruukki. It became part of Tata Steel in Europe in 2015, at which point the Naantali Steel Service Centre was established.
Our products include:
- hot-dip galvanised steels
- electro-galvanised steels
- aluminium zinc galvanised steels
- pre-finished or colour coated steels
- cold-rolled steels
- hot-rolled steels
Processing capabilities at Naantali Steel Service Centre Oy comprise:
Slitting | Decoiling | Recoiling | |
---|---|---|---|
Thickness | 0.4 – 4.0mm | 0.4 – 6.0mm | 0.4-1.5mm |
Width | 10 –1500mm | < 2050mm | 400-1250mm |
Length | - | 400 –12000mm | - |
Please consult our sales department regarding specific technical feasibility of dimensional combinations, tolerances and grades.
The table below shows further information about our decoiling capability for various grades and qualities.
Product line | Grade | Coating / Treatment | Thickness (mm) |
---|---|---|---|
Hot-rolled | S355MC | Pickled and Oiled | 3 - 6 |
8 - 121 | |||
15 - 201 | |||
S650MC | 3 - 6 | ||
355K2+N | Non-pickled | 3 - 6 | |
Cold-rolled | DC01 | Oiled | 0.5 - 3 |
DC04 | 1 - 3 | ||
Metallic coated | DX51D+Z | Galvanised (Z) | 0.5 - 3 |
S350GD+Z | 1 - 3 | ||
Contact us | Galvannealed (ZF) | 0.5 - 3 | |
Contact us | Electro-galvanised (ZE) | 0.6 - 3 | |
Contact us | Aluminium-zinc (AZ) | 0.6 - 2 |
Max. width is 2000mm.
Other grades and dimensions are available. Please contact us with your enquiry.
1 These grades and dimensions are available in a standard pack size of 1500mm x 3000mm
Certifications
Naantali Steel Service Centre Oy is certified to the following standards:
ISO 9001 and ISO 14001
EN 1090 - allowing use to label processed materials with the CE-mark as proof of compliance with the EU Construction Products Regulation
Tata Steel
Naantali Steel Service Centre Oy
Rautakatu 5
21110 Naantali
Finland
General Enquiries
T: +358 (0)10 28 76 900
E: sales.naantali@tatasteeleurope.com
Sales Team
Marko Juhannusvuori, Sales Manager; +358 (0) 41 435 3635; marko.juhannusvuori@tatasteeleurope.com
Mikko Kurttila, Area Sales Manager; +358 (0) 40 844 3218; mikko.kurttila@tatasteeleurope.com
Toni Vuolle, Area Sales Manager; +358 (0) 40 519 7356 ; toni.vuolle@tatasteeleurope.com
Mikko Ojanto, Area Sales Manager (aluemyyntipäällikkö in Finnish), +358 40 717 7918, mikko.ojanto@tatasteeleurope.com
Opening hours
Naantali SSC ensures the loading of all vehicles during the official loading times from Monday to Thursday, between 7:00 am and 14:00 pm, on Friday between 7:00 am and 13:00 pm.
The exact loading time will be announced weekly depending on the load.
Naantali SSC ensures the unloading of all vehicles during the official unloading times from Monday to Thursday, between 07:00 am and 19:00 pm, on Friday between 07:00 am and 16:00 pm. The exact loading time will be announced weekly depending on the unload.
Sales/customer service (Monday - Friday) 08.00 am to 16.00 pm.
Despatch (Monday – Friday) 7:00 am to 15:00 pm.
EN-Service centres-Contact-Finland Naantali
Naantali Steel Service Centre Oy
Rautakatu 5
21110 Naantali
Finland