Trisobuild HW
Specification details for Trisobuild® HW

EN-Construction-Overview of Trisobuild® HW wall systems

Overview
Trisobuild Horizontal Wall

The Trisobuild® HW system is a horizontally run external wall system that allows the secondary steelwork to remain horizontal with the spacer system spanning vertically between these rails.

Bracket height (mm) Insulation depth (mm) U-value (W/m2K)
120 140 0.35
140 140 0.30
160 160 0.26
180 180 0.23
200 200 0.21

Above U-values based on a LP1000 liner, secondary steelwork support at 1.5m centres, 1.5m bracket spacing and insulation with a 0.040W/mK thermal conductivity.

All Trisobuild® HW systems can be covered under our Platinum® Plus system guarantee. Simply fill in your project details using our easy-to-use online specification tool or contact us directly.

If you have any questions or for further information click here to contact us.

Request a product sample

EN-Construction-Benefits of Trisobuild® wall systems

Benefits

All our products are fully tested by third parties for criteria such as thermal performance, fire safety, acoustic performance, air-tightness, and resistance to water penetration. This together with our extensive and unbiased technical support sets us apart.

All Trisobuild® wall systems can be covered under our Platinum® Plus system guarantee. Simply fill in your project details using our easy-to-use online specification tool or contact us directly.

Trisobuild® systems are supplied with Colorcoat® pre-finished steel for the external and internal skin so that we can provide the very highest quality and service to our customers.

All Trisobuild® components are easily handled on site without specialist mechanical equipment, due to lightweight components. This can be important when working on sites with limited access.

Loss Prevention Certification Board (LPCB) approval to LPS 1181 part 1 for fire performance, helps to lower insurance premiums.

Trisobuild® FW systems provide cost effective systems for 15, 30 and 60 minute fire insulation resistance.  Providing solutions for all external wall fire requirements within the building regulations.

Environmental Product Declarations (EPD) are available for all the Trisobuild® wall system solutions.  Request a bespoke product or system specific EN 15804 Type III EPD to help accrue points under building certification schemes such as LEED and BREEAM.

We will recommend the most appropriate system for your project to provide you with a building envelope solution that meets your requirements for design and performance criteria.

trisobuild certification logos

If you have any questions or for further information click here to contact us.

EN-Construction-Platinum® Plus system guarantee

Platinum® Plus system guarantee

Platinum® Plus is a system guarantee for 25 years, that covers the durability, structural and thermal performance of all system components.

The guarantee is derived from a tailored specification to suit your building function and is fully transferable on change of ownership of the building. Our reputable supply chain partners and commitment to responsible sourcing creates an enhanced building envelope system that is robust and proven.

View our interactive brochure for more information or watch our video below

 

Platinum® Plus offers enduring durability and building performance, lowering cost of ownership through the life of the building.

We understand that complex buildings need tailored solutions, so our online specification tool has been designed by our technical team to help you create the right specification to suit the needs of your project. We make sure all roofing and cladding components listed are compatible with ours and perform together as a system.

platinum plus logo tata steel building envelope guarantee

Our support continues through on-site checks, ensuring the products installed are in accordance with the specification.

At completion, the Platinum® Plus system guarantee is issued direct to the building owner, who enjoys the long term reassurance that any issue will be dealt with through a single point of contact.

When you choose Platinum® Plus, you’re choosing guaranteed performance, and lower operating and maintenance costs for the life of the building. 

Key features of Platinum® Plus system guarantee

In addition to the benefits that our cladding products provide, Platinum® Plus also offers:

  • 25 years transferable guarantee provided direct to building owner
  • Support from specification to on-site check
  • Create and store your tailored specifications via our online tool
  • One point of contact for help with system issues
  • Flexibility in design through our wide range of system options
  • Fully traceable products manufactured through our integrated supply chain
  • 50 years of experience and extensive testing of our products
  • Underpinned by Confidex® Guarantee for the pre-finished steel

The Platinum® Plus system guarantee is available on our Formawall®, Trisomet®Trimapanel® and Trisobuild® products.

As well as our roof and wall cladding systems, Platinum® Plus includes all flashings, boundary gutters, sealant, fasteners and safe link systems when named in the project specification.

End-to-end reassurance

Our building envelope technical team is on hand to build the right specification to meet your requirements including advice on:

  • Specification writing.
  • Acoustic SRI predictions.
  • Wind and snow load calculations.
  • Load span checks.
  • Building regulation advice.
  • Gutter design.
  • Assistance with SBEM.
  • U-value calculation.
  • BREEAM advice.
  • Detail design.
  • Condensation risk analysis.

 

To begin the specification process please complete your project details through our online specification tool or contact us to speak to one of our technical team click here to contact us.

EN-Construction-Download Trisobuild® Wall BIM Objects

Download BIM Objects

BIM: The way you want it

The DNA Profiler has been designed to allow you to access Tata Steel’s product information (3d parametric objects & data) how you want, when you want, to the level of detail you want, in the format you want.

Product Name Link
Trisobuild C19 Trapezoidal 0.475mm steel BIM DNA Profiler
Trisobuild C19 Trapezoidal 0.675mm steel BIM DNA Profiler
Trisobuild C19 Trapezoidal 0.9mm Aluminium BIM DNA Profiler
Trisobuild C32 Trapezoidal 0.475mm steel BIM DNA Profiler
Trisobuild C32 Trapezoidal 0.675mm steel BIM DNA Profiler
Trisobuild C32 Trapezoidal 0.9mm aluminium BIM DNA Profiler
Trisobuild C32MR Trapezoidal 0.675mm steel BIM DNA Profiler
Trisobuild C32MR Trapezoidal 0.90mm aluminium BIM DNA Profiler
Trisobuild R13.5/3 Sinusoidal 0.475mm steel BIM DNA Profiler
Trisobuild R13.5/3 Sinusoidal 0.675mm steel BIM DNA Profiler

In addition to our DNA Profiler, you can access our BIM content at BIMobject here or alternatively follow the links on our individual product pages on this website.


bim object tata steel construction

In addition to our DNA Profiler, you can access our BIM content at BIMobject.com

Product Name Link
Trisobuild Vertical Wall system BIM Object
Trisobuild Vertical Fire Wall system BIM Object
Trisobuild Horrizontal Wall system BIM Object

 

If you have any questions or for further information click here to contact us.

EN-Construction-sustainability-optemis-carbon-lite

Optemis™ Carbon Lite

The launch of Optemis Carbon Lite is an important step in our ongoing decarbonisation journey. It demonstrates our progress and represents a unique solution for customers in the form of a flexible, lower CO2 steel offering.

Optemis Carbon Lite is a fully certified in-setting scheme with COsavings achieved from implemented projects, verified by a 3rd party auditor, DNV, and credited to our CO2 bank.  Our continued commitment to decarbonisation means reductions in CO2 emissions can now be passed on to our customers, enabling them to achieve immediate Scope 3 emission savings.

Revenues generated from the sale of Optemis Carbon Lite declarations are used to fund additional decarbonisation projects, generating further CO2 savings to be verified by DNV and speeding up our decarbonisation efforts.

By buying Optemis Carbon Lite from Tata Steel UK we, and our customers, will be actively contributing to a reduction in atmospheric CO2.

Find out more about Optemis Carbon Lite


Please accept marketing cookies to reach this.

Picture100.png

 

EN-Construction-Trisobuild® wall systems Downloads

Downloads

Find related downloads below for your project specification:

EN-Construction-Trisobuild® wall systems drawings

Technical drawings

Find related technical drawing downloads below for your project specification:

EN-Construction-Book a CPD

Book a CPD

We offer a range of face to face and online CPDs aimed at Engineers and Architects

These free seminars can be booked at any time between 9am and 5pm. Our online webinars can all be delivered via Skype for Business and Teams, but we can consider other platforms if this will not work for your practice.

Below outline the CPDs we have available - Book yours today

  • Decarbonising your structural hollow section designs
  • Essentials of Structural Hollow Sections
  • Welded Joints in Tubular Steelwork - Eurocode 3 Part 1-8
  • Concrete Filled Hollow Sections - Composite Design – Eurocode 4
  • Composite Floor Deck in Construction
  • Structural Roof Deck in Construction
  • Specifying metal clad envelope systems in accordance with ADB2 of the building regulations and the value of large scale system testing
  • RIBA 2030 climate challenge: How steel building envelope solutions contribute
  • Pre-finished steel standing seam systems for roof & wall cladding
  • CDM regulations 2015 and their impact on steel building envelope specification.
  • Steel building envelope systems for non-domestic buildings
  • Steel for roof and wall cladding

Book your CPD today

RIBA Approved CPD tata steel