Colorcoat® SDP 35 - RWG
Colorcoat® SDP 35 - RWG is a double sided pre-finished steel product suitable for rainwater goods, down pipes and associated accessories.
EN-Construction-Product-Colorcoat SDP 35 - RWG-default
EN-Construction-Product-Colorcoat SDP 35 - RWG | Product benefits
- Textured 35 micron coating for improved robustness.
- Galvanised substrate produced with Z275 g/m2 or equivalent to EN 10346:2015 with a Zinc metallic coating offering very good corrosion resistance.
- Available in steel forming grades DX52, DX53, DX54 and DX56 to EN 10346:2015.
- Available in a wide range of colours with good colour retention.
EN-Construction-Product-Colorcoat SDP 35 - RWG | Product performance
- Colorcoat® SDP 35 - RWG is carefully manufactured in a controlled process to ensure consistent quality. Colorcoat® SDP 35 - RWG is suitable for downpipes, gutters, brackets and deep drawn accessories.
- Colorcoat® SDP 35 - RWG is available in different textures and increased flexibility. Double sided and low gloss options are offered.
- Tata Steel has a range of Colorcoat® products suitable for different environments and applications.
EN-Construction-Product-Colorcoat SDP 35 - RWG | Typical properties
| Properties | Test Standard | ||
|---|---|---|---|
| Nominal organic coating thickness |
μm* | 35 | EN 13523-1 |
| Specular gloss (60°) | (%) | 25 - 45 | EN 13523-2 |
| Scratch resistance | (g) | >2500 | EN 13523-12 |
| Abrasion resistance (Taber, 250 rev, 1kg, CS10 wheels) |
(mg) | <30 | EN 13523-16 |
| Flexibility: Minimum bend radius |
T | 0T@16°C | EN 13523-7 |
| Resistance to rapid deformation |
J | 16 | EN 13523-5 |
| Adhesion | T | 0T | EN 13523-7 |
| Corrosion resistance: Salt spray |
hours | 500 | EN 13523–8 |
| Corrosion resistance: Humidity |
hours | 1000 | EN 13523-26 |
| Corrosion resistance category |
RC4 | EN 10169:2010 | |
| UV resistance category | Ruv3 | EN 10169:2010 | |
| Reaction to fire classification |
A1 | EN 13501-1 |
*μm = micron
General notes
1. The figures contained in this table are typical properties and do not constitute a specification.
2. To meet the corrosion resistance properties, a Zinc weight of Z275 g/m2 or equivalent applies to meet the corrosion resistance properties and warranty.
EN-Construction-Product-Colorcoat SDP 35 - RWG | Guarantee
Guarantee
<p>A warranty is available as an anti-perforation guarantee for up to 10 years. Refer to applicable terms and conditions. Minimum Zinc weight 275 g/m<sup>2</sup> or equivalent. The actual duration of the guarantee will depend on the environment and geographic location.</p>
EN-Construction-Product-Colorcoat SDP 35 - RWG-downloads
Downloads
<p></p>
EN-Construction-Datasheet-Colorcoat SDP 35 RWG datasheet
Colorcoat® SDP 35 RWG datasheet
EN-Construction-Product-Unglazed Transpired Solar Collector (Was Colorcoat Renew SC)
An active solar air heating solution that provides a renewable pre-heat function.
EN-Construction-Product-Colorcoat High Reflect
The optimum reflectivity for an internal liner, maximising daylight and reducing requirements for artificial lighting.