ComFlor® 9.0.34 Software analyses each of the ComFlor® composite floor decks in construction stage, service stage and for fire resistance, under a wide range of loading configurations.
Design principles are in accordance with the appropriate parts of BS 5950 : Part 4 (1994), Part 6 (1995), Part 8 (1991) For design to the Eurocodes, the design principles are in accordance with EN 1994-1-1 and EN 1994-1-2:Eurocode 4. The design checks performed by the program cover the construction stage, the normal design stage and fire.
The slab may be propped or unpropped during construction and may also span over one or more permanent or temporary supports. In the double span case, the spans may be equal or unequal. At the normal design stage, however, the slab is always assumed to be simply supported between permanent supports. The slab is assumed to span only in the direction of spanning of the decking i.e. two-way spanning floors are not covered.
How to download ComFlor® 9.0.34 Software
1) Download Version 9.0.34 here
2) Install Version 9.0.34
Terms and Conditions of Use
SELECTING "DOWNLOAD" BELOW CONSTITUTES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. PLEASE READ THEM CAREFULLY. IF YOU DO NOT AGREE WITH THEM, DO NOT DOWNLOAD OR USE THE SOFTWARE.
1. RIGHT TO USE
Subject to your acceptance of these Terms and Conditions as set forth on this page, you are hereby granted a non-exclusive, non-transferable right to use this Program for the sole purpose of assisting in the selection or specification of products described in the program. This Program, and all related rights and patents, copyrights, trade secrets and other intellectual property, are and shall remain the sole property of Tata Steel UK Limited ["Tata Steel"] or The Steel Construction Institute ["SCI"] . You agree not to copy, reverse compile or engineer, disassemble, or otherwise use this program, or permit others to do so, other than as specifically authorised in these Terms and Conditions.
The latest version of this program is available via the above Download button.
3. TERMS AND CONDITIONS OF SUPPLY
THIS PROGRAM IS PROVIDED AS IS, WITH NO WARRANTIES, GUARANTEES, REPRESENTATIONS OR CONDITIONS. In no event shall Tata Steel be liable for any direct or indirect, consequential, special, financial or economic losses, damages, costs claims or expenses (including any loss of profits) howsoever arising whether due to negligence or otherwise associated with the use, or inability to use, this Program. Risk in the use of this Program lies solely with the user. Tata Steel standard "Terms and Conditions of Sale" apply to all products sold by Tata Steel.
To download ComFlor® 9.0.34 software for the Middle East only
A version of this software, using customary dimensions for the Middle East market, is available and can be downloaded here.
We maintain a friendly technical help desk which is freely available to all Consulting Engineers, and Contractors to assist with all aspects of ComFlor® composite floor design. The services we offer include:
To assist the specifier, the team are able to provide design calculations, generally dictated by the construction stage condition, the load and span required for service and the fire resistance required for the slab. Our team can also help with specialised design issues such as point loads, requirements for anti crack mesh, openings, etc.
ComFlor® composite floor decks can meet the most stringent vibration applications, such as those required for National Health Service operating theatres.
Comprehensive ComFlor® Software is free to download here. The ComFlor® Software provides quick and easy calculations for different building categories, loads, fire performance, spans, vibration, point loads and line loads. Regular updates are sent to all registered users.
Supporting beam width
For all ComFlor® 46 load/span tables, the width of the support beam used is assumed to be 152mm.
The capacity of the composite slab in fire may be calculated using two methods, either ‘Mesh and Deck Fire Method’ (mesh only and no trough bar reinforcement) or ‘Bar Fire Method’ (trough bottom bar reinforcement only with no contribution from the mesh and profile).
Our ComFlor® team are able to provide a comprehensive specification guidance to ensure the correct composite floor specification goes into the contract documents.
In-house CPD seminars
Primarily aimed at Engineers and Architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams. Topics include:
- Composite floor decking in construction.
- Structural roof decking in construction.
- Steel building envelope systems for non-domestic buildings.
- Factory tour – Insulated Panel Line at Shotton works.
To request a CPD seminar please click here.