Hot-rolled
Heat treatable steel

Tata Steel offers a choice of hot-rolled heat-treatable steels.

Heat-treatable steels offer advantages across many applications. We exercise stringent control over chemical composition and production processes, resulting in a robust, consistent and reliable quality you can depend on.

Boron manganese grades are used in agricultural equipment
Oil country tubular goods
Boron manganese grades are designed for soil tillage tools
Hot-rolled high carbon steel component
Hot-rolled high carbon steel component
Hot-rolled heat treatable steel component
Product specification
Heat treatable steels are currently available in the following grades

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1015

1015
Specification details for 1015

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-Case-hardening Overview

Overview

Tata Steel offers a choice of hot-rolled heat-treatable steel. Its chemical composition and the production processes we employ ensure robust, consistent products. 
 

Case-hardening steel

Case-hardening grades provide excellent formability and good punching quality. Our C15E case-hardening steel is suitable for wear-resistant components that must withstand extreme fatigue stress.
 

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition

non-pickled

pickled

pickled and oiled

Mill edges

Yes

Yes

Yes

Trimmed edges

-

Yes

Yes

Trimmed edges available in thicknesses up to 8.0 mm. The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs.

Surface aspects

Description

Availability

Surface finish

Coils are available in non-pickled and pickled finish

Oiling

Pickled finish is available with rolling or preservative oil applied

 

Oil weight normally 0.5-2.5 g/m2

Alternative oiling ranges are available – please contact us for details.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1015-Properties

Properties

Chemical composition

The chemical composition of this case hardening product conforms to SAE J403:2009 and is shown in the table below.

SAE J403 Grade 1015
C Min. - max. 0.13–0.18
Mn Min. - max. 0.30–0.60
P Max. 0.030
S Max. 0.050
All values are in weight%.
Tighter chemical compositions are available, please consult us.

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1055

1055
Specification details for 1055

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-High carbon Overview

Overview

Tata Steel offers a choice of hot-rolled heat-treatable steel. Its chemical composition and the production processes we employ ensure robust, consistent products.
 

High carbon steel

High carbon steels are characterised by high levels of resistance, hardness and strength. This grade is designed for parts which require reliable form stability during intensive use.

Typical applications are saw blades, safety-shoe toe caps, (bicycle) chains, clips and buckles for seatbelts, clutches, automotive components, valves, washers and springs.

C67mod is based on an intermediate chemistry so it can be used to cover both the C67 and C75 chemistries according to EN 10132. Thereby the C67mod provides optimum flexibility for the users covering both defined grades.
 

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition

non-pickled

pickled

pickled and oiled

Mill edges

Yes

Yes

Yes

Trimmed edges

-

Yes

Yes

Trimmed edges available in thicknesses up to 8.0 mm. The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs.
 

Surface aspects

Description

Availability

Surface finish

Coils are available in non-pickled and pickled finish

Oiling

Pickled finish is available with rolling or preservative oil applied

 

Oil weight normally 0.5-2.5 g/m2

Alternative oiling ranges are available – please contact us for details.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1055-Properties

Properties

Chemical composition

The chemical composition of this high carbon product conforms to SAE J403:2009 and is shown in the table below.

SAE J403 Grade 1055
C Min. - max. 0.50–0.60
Mn Min. - max. 0.60–0.90
P Max. 0.030
S Max. 0.050
All values are in weight%.
Tighter chemical compositions are available, please consult us.

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1055-Dimensions

Dimensions

Dimensional capability - non-pickled

Dimensions in mm.

Thickness Max. width
From - up to Grade 1055
2.00 - 6.50 1250
Minimum width is 1000 mm. 
Other dimensions are available - please contact us.
 

Dimensional capability - pickled

Dimensions in mm.

Thickness Max. width
From - up to Grade 1055
2.00 - 4.50 1250
Minimum width is 1000 mm. 
Other dimensions are available - please contact us.
 

Tolerances

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.

Tighter tolerances are available, please contact us.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1060

1060
Specification details for 1060

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-High carbon Overview

Overview

Tata Steel offers a choice of hot-rolled heat-treatable steel. Its chemical composition and the production processes we employ ensure robust, consistent products.
 

High carbon steel

High carbon steels are characterised by high levels of resistance, hardness and strength. This grade is designed for parts which require reliable form stability during intensive use.

Typical applications are saw blades, safety-shoe toe caps, (bicycle) chains, clips and buckles for seatbelts, clutches, automotive components, valves, washers and springs.

C67mod is based on an intermediate chemistry so it can be used to cover both the C67 and C75 chemistries according to EN 10132. Thereby the C67mod provides optimum flexibility for the users covering both defined grades.
 

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition

non-pickled

pickled

pickled and oiled

Mill edges

Yes

Yes

Yes

Trimmed edges

-

Yes

Yes

Trimmed edges available in thicknesses up to 8.0 mm. The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs.
 

Surface aspects

Description

Availability

Surface finish

Coils are available in non-pickled and pickled finish

Oiling

Pickled finish is available with rolling or preservative oil applied

 

Oil weight normally 0.5-2.5 g/m2

Alternative oiling ranges are available – please contact us for details.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1060-Properties

Properties

Chemical composition

The chemical composition of this high carbon product conforms to SAE J403:2009 and is shown in the table below.

SAE J403 Grade 1060
C Min. - max. 0.55–0.65
Mn Min. - max. 0.60–0.90
P Max. 0.030
S Max. 0.050
All values are in weight%.
Tighter chemical compositions are available, please consult us.

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1070

1070
Specification details for 1070

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-High carbon Overview

Overview

Tata Steel offers a choice of hot-rolled heat-treatable steel. Its chemical composition and the production processes we employ ensure robust, consistent products.
 

High carbon steel

High carbon steels are characterised by high levels of resistance, hardness and strength. This grade is designed for parts which require reliable form stability during intensive use.

Typical applications are saw blades, safety-shoe toe caps, (bicycle) chains, clips and buckles for seatbelts, clutches, automotive components, valves, washers and springs.

C67mod is based on an intermediate chemistry so it can be used to cover both the C67 and C75 chemistries according to EN 10132. Thereby the C67mod provides optimum flexibility for the users covering both defined grades.
 

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition

non-pickled

pickled

pickled and oiled

Mill edges

Yes

Yes

Yes

Trimmed edges

-

Yes

Yes

Trimmed edges available in thicknesses up to 8.0 mm. The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs.
 

Surface aspects

Description

Availability

Surface finish

Coils are available in non-pickled and pickled finish

Oiling

Pickled finish is available with rolling or preservative oil applied

 

Oil weight normally 0.5-2.5 g/m2

Alternative oiling ranges are available – please contact us for details.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1070-Properties

Properties

Chemical composition

The chemical composition of this high carbon product conforms to SAE J403:2009 and is shown in the table below.

SAE J403 Grade 1070
C Min. - max. 0.65–0.75
Mn Min. - max. 0.60–0.90
P Max. 0.030
S Max. 0.050
All values are in weight%.
Tighter chemical compositions are available, please consult us.

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1075

1075
Specification details for 1075

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-High carbon Overview

Overview

Tata Steel offers a choice of hot-rolled heat-treatable steel. Its chemical composition and the production processes we employ ensure robust, consistent products.
 

High carbon steel

High carbon steels are characterised by high levels of resistance, hardness and strength. This grade is designed for parts which require reliable form stability during intensive use.

Typical applications are saw blades, safety-shoe toe caps, (bicycle) chains, clips and buckles for seatbelts, clutches, automotive components, valves, washers and springs.

C67mod is based on an intermediate chemistry so it can be used to cover both the C67 and C75 chemistries according to EN 10132. Thereby the C67mod provides optimum flexibility for the users covering both defined grades.
 

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition

non-pickled

pickled

pickled and oiled

Mill edges

Yes

Yes

Yes

Trimmed edges

-

Yes

Yes

Trimmed edges available in thicknesses up to 8.0 mm. The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs.
 

Surface aspects

Description

Availability

Surface finish

Coils are available in non-pickled and pickled finish

Oiling

Pickled finish is available with rolling or preservative oil applied

 

Oil weight normally 0.5-2.5 g/m2

Alternative oiling ranges are available – please contact us for details.

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1075-Properties

Properties

Chemical composition

The chemical composition of this high carbon product conforms to SAE J403:2009 and is shown in the table below.

SAE J403 Grade 1075
C Min. - max. 0.70–0.80
Mn Min. - max. 0.40–0.70
P Max. 0.030
S Max. 0.050
All values are in weight%.
Tighter chemical compositions are available, please consult us.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1080

1080
Specification details for 1080

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-High carbon Overview

Overview

Tata Steel offers a choice of hot-rolled heat-treatable steel. Its chemical composition and the production processes we employ ensure robust, consistent products.
 

High carbon steel

High carbon steels are characterised by high levels of resistance, hardness and strength. This grade is designed for parts which require reliable form stability during intensive use.

Typical applications are saw blades, safety-shoe toe caps, (bicycle) chains, clips and buckles for seatbelts, clutches, automotive components, valves, washers and springs.

C67mod is based on an intermediate chemistry so it can be used to cover both the C67 and C75 chemistries according to EN 10132. Thereby the C67mod provides optimum flexibility for the users covering both defined grades.
 

Supply - product conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition

non-pickled

pickled

pickled and oiled

Mill edges

Yes

Yes

Yes

Trimmed edges

-

Yes

Yes

Trimmed edges available in thicknesses up to 8.0 mm. The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs.
 

Surface aspects

Description

Availability

Surface finish

Coils are available in non-pickled and pickled finish

Oiling

Pickled finish is available with rolling or preservative oil applied

 

Oil weight normally 0.5-2.5 g/m2

Alternative oiling ranges are available – please contact us for details.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-Heat treatable steel-1080-Properties

Properties

Chemical composition

The chemical composition of this high carbon product conforms to SAE J403:2009 and is shown in the table below.

SAE J403 Grade 1080
C Min. - max. 0.75–0.88
Mn Min. - max. 0.60–0.90
P Max. 0.030
S Max. 0.050
All values are in weight%.
Tighter chemical compositions are available, please consult us.

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply