Hot-rolled
High-strength steel

Tata Steel’s hot-rolled high-strength, low-alloy (HSLA) grades offer formability and strength for demanding applications.

The range includes Ympress® with grades that exceed the Euronorm, resulting in stronger and lighter products with increased yield and simplified processing. Our Ympress® Laser range was developed specifically for fast and efficient laser-cutting.  The resulting clean-cut edges mean end products require less finishing.

Close up view of hot rolled coil
Product specification
High-strength steel is currently available in the following grades

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 40

Ympress 40
Specification details for Ympress 40 grades

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress grades Overview

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

The high yield strength of Ympress delivers weight savings and increased component strength. This can help you create lighter, stronger products and increase yield through down-gauging. Consistent properties and tight control of material thickness allow trouble-free, repeatable processing. Ympress can be easily welded and galvanised. Its high surface quality can lead to fewer processing steps.

Applications

  • Agricultural machinery
  • Automotive components
  • Containers
  • Cranes and crane booms
  • Earth-moving equipment
  • Lightweight towers
  • Radiator components
  • Safety-critical applications
  • Racking and shelving
  • Telescopic booms
  • Tow hooks
  • Train carriages
     

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

Ympress ASTM A1011-15 SAE J1392 JIS G3134
  ASTM A1018-16    
Grade Grade Grade Grade
Ympress 40 XK   040 XLK  
Ympress 45 XF - 045 XLF  
Ympress 45 XK HSLAS Grade 45 Class 2 045 XLK SPFH 490
Ympress 45 YF - 045 YLF  
Ympress 45 YK HSLAS Grade 45 Class 1 045 YLK  
Ympress 50 XF HSLAS-F Grade 50 050 XLF SPFH 540
Ympress 50 XK HSLAS Grade 50 Class 2 050 XLK  
Ympress 50 YF - 050 YLF  
Ympress 50 YK HSLAS Grade 50 Class 1 050 YLK  
Ympress 55 XK HSLAS Grade 55 Class 2 -  
Ympress 55 YK HSLAS Grade 55 Class 1 -  
Ympress 60 XF HSLAS-F Grade 60 060 XLF SPFH 590
Ympress 60 XK HSLAS Grade 60 Class 2 060 XLK  
Ympress 60 YF - 060 YLF  
Ympress 60 YK HSLAS Grade 60 Class 1 060 YLK  
Ympress 65 XK HSLAS Grade 65 Class 2 -  
Ympress 65 YK HSLAS Grade 65 Class 1 -  
Ympress 70 XF HSLAS-F Grade 70 070 XLF  
Ympress 70 XK HSLAS Grade 70 Class 2 070 XLK  
Ympress 70 YF - 070 YLF  
Ympress 70 YK HSLAS Grade 70 Class 1 070 YLK  
Ympress 80 XF HSLAS-F Grade 80 080 XLF  
Ympress 80 XK - 080 XLK  
Ympress 100 XF UHSS Grade 100 -  
Ympress S700MC1 - -  
Ympress S960MC1 - -  
1. Tata Steel’s own specification.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 40-Properties

Properties

Properties


Mechanical properties

The values below show the guaranteed mechanical properties of Ympress. Ympress products guarantee tighter limits than ASTM A1011/A1018.
The values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction unless shown otherwise.
The values of the bend test apply to test bars transverse to the rolling direction.

Ympress Grade Ympress 40 XK
Min. yield strength ksi 40
Min. tensile strength ksi 50
Elingation% t < 0.230 inch 30
  t ≥ 0.230 inch -
Bend radius   0t
Elongation after fracture A uses test piece length L0 = 2 inches.
Please contact us for further information on Charpy toughness and impact test properties. 
 

Chemical composition

The following tables represent the guaranteed values for Ympress.
All values in weight%.

Tata Steel Grade Ympress 40
C Max. 0.10
Mn Max. 0.40
P Max. 0.020
S Max. 0.015
Si Max. 0.030
Altot Min. 0.015
Cb Max. 0.04
Ti Max. 0.03

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 40-Dimensions

Dimensions

Dimensions

Dimensional capability (non-pickled)

Dimensions in inches.

Ympress
Thickness Max. width
From - up to Ympress 40
0.060 - 0.070 51
0.070 - 0.080 60
0.080 - 0.090 68
0.090 - 0.100 73
0.100 - 0.110 78
0.110 - 0.120 80
0.120 - 0.130 81
0.130 - 0.140 81
0.140 - 0.150 81
0.150 - 0.160 81
0.160 - 0.170 81
0.170 - 0.180 81
0.180 - 0.190 81
0.190 - 0.200 81
0.200 - 0.210 81
0.210 - 0.220 81
0.220 - 0.230 81
The minimum width is 35 inch.
 

Dimensional capability (pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness Max. width
From - up to Ympress 40
0.060 - 0.070 51
0.070 - 0.080 60
0.080 - 0.090 68
0.090 - 0.100 73
0.100 - 0.110 78
0.110 - 0.120 80
0.120 - 0.130 79
0.130 - 0.140 78
0.140 - 0.150 78
0.150 - 0.160 78
0.160 - 0.170 78
0.170 - 0.180 78
0.180 - 0.190 78
0.190 - 0.200 74
0.200 - 0.210 70
0.210 - 0.220 66
0.220 - 0.230 62
The minimum width is 35 inch.
 

Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 45

Ympress 45
Specification details for Ympress 45 grades

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress grades Overview

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

The high yield strength of Ympress delivers weight savings and increased component strength. This can help you create lighter, stronger products and increase yield through down-gauging. Consistent properties and tight control of material thickness allow trouble-free, repeatable processing. Ympress can be easily welded and galvanised. Its high surface quality can lead to fewer processing steps.

Applications

  • Agricultural machinery
  • Automotive components
  • Containers
  • Cranes and crane booms
  • Earth-moving equipment
  • Lightweight towers
  • Radiator components
  • Safety-critical applications
  • Racking and shelving
  • Telescopic booms
  • Tow hooks
  • Train carriages
     

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

Ympress ASTM A1011-15 SAE J1392 JIS G3134
  ASTM A1018-16    
Grade Grade Grade Grade
Ympress 40 XK   040 XLK  
Ympress 45 XF - 045 XLF  
Ympress 45 XK HSLAS Grade 45 Class 2 045 XLK SPFH 490
Ympress 45 YF - 045 YLF  
Ympress 45 YK HSLAS Grade 45 Class 1 045 YLK  
Ympress 50 XF HSLAS-F Grade 50 050 XLF SPFH 540
Ympress 50 XK HSLAS Grade 50 Class 2 050 XLK  
Ympress 50 YF - 050 YLF  
Ympress 50 YK HSLAS Grade 50 Class 1 050 YLK  
Ympress 55 XK HSLAS Grade 55 Class 2 -  
Ympress 55 YK HSLAS Grade 55 Class 1 -  
Ympress 60 XF HSLAS-F Grade 60 060 XLF SPFH 590
Ympress 60 XK HSLAS Grade 60 Class 2 060 XLK  
Ympress 60 YF - 060 YLF  
Ympress 60 YK HSLAS Grade 60 Class 1 060 YLK  
Ympress 65 XK HSLAS Grade 65 Class 2 -  
Ympress 65 YK HSLAS Grade 65 Class 1 -  
Ympress 70 XF HSLAS-F Grade 70 070 XLF  
Ympress 70 XK HSLAS Grade 70 Class 2 070 XLK  
Ympress 70 YF - 070 YLF  
Ympress 70 YK HSLAS Grade 70 Class 1 070 YLK  
Ympress 80 XF HSLAS-F Grade 80 080 XLF  
Ympress 80 XK - 080 XLK  
Ympress 100 XF UHSS Grade 100 -  
Ympress S700MC1 - -  
Ympress S960MC1 - -  
1. Tata Steel’s own specification.

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 45-Properties

Properties

Properties


Mechanical properties

The values below show the guaranteed mechanical properties of Ympress. Ympress products guarantee tighter limits than ASTM A1011/A1018.
The values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction unless shown otherwise.
The values of the bend test apply to test bars transverse to the rolling direction.

Ympress Grade Ympress 45 XF Ympress 45 YF
Min. yield strength ksi 45 45
Min. tensile strength ksi 55 60
Elingation % t < 0.230 inch 27 27
t ≥ 0.230 inch - -
Bend radius   0t 0t
Elongation after fracture A uses test piece length L0 = 2 inches.
Please contact us for further information on Charpy toughness and impact test properties.       
 

Chemical composition

The following tables represent the guaranteed values for Ympress.
All values in weight%.

Tata Steel Grade Ympress 45
C Max. 0.10
Mn Max. 0.60
P Max. 0.020
S Max. 0.005
Si Max. 0.030
Altot Min. 0.015
Cb Max. 0.04
Ti Max. 0.03

Steel supplied against ASTM A1011/A1018 will comply with the chemical limits below.
All values are in weight%. 

ASTM A1011-15
ASTM A1018-16
Grade HSLAS Grade 45 Class 1 HSLAS Grade 45 Class 2
C Max. 0.22 0.15
Mn 1 Max. 1.35 1.35
P 2 Max. 0.04 0.04
S 3 Max. 0.04 0.04
Si Max. - -
Altot Min. - -
Cb Min. 0.005 0.005
V Min. 0.005 0.005
1. Mn Grades 45-55 in ASTM A1018 is a 1.5% max.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 45-Dimensions

Dimensions

Dimensions

Dimensional capability (non-pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness Max.  width
From - up to Ympress 45
0.060 - 0.070 47
0.070 - 0.080 56
0.080 - 0.090 62
0.090 - 0.100 70
0.100 - 0.110 73
0.110 - 0.120 76
0.120 - 0.130 79
0.130 - 0.140 81
0.140 - 0.150 81
0.150 - 0.160 81
0.160 - 0.170 81
0.170 - 0.180 81
0.180 - 0.190 81
0.190 - 0.200 81
0.200 - 0.210 81
0.210 - 0.220 81
0.220 - 0.230 81
0.230 - 0.240 81
0.240 - 0.250 81
0.250 - 0.260 81
0.260 - 0.280 81
0.280 - 0.300 81
0.300 - 0.320 81
0.320 - 0.500 81
The minimum width is 35 inch.

Dimensional capability (pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness Max. width
From - up to Ympress 45
0.060 - 0.070 47
0.070 - 0.080 56
0.080 - 0.090 62
0.090 - 0.100 70
0.100 - 0.110 73
0.110 - 0.120 76
0.120 - 0.130 79
0.130 - 0.190 80
0.190 - 0.200 74
0.200 - 0.210 70
0.210 - 0.220 66
0.220 - 0.230 61
0.230 - 0.250 61
0.250 - 0.500 -
The minimum width is 35 inch.
 

Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 50

Ympress 50
Specification details for Ympress 50 grades

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress grades Overview

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

The high yield strength of Ympress delivers weight savings and increased component strength. This can help you create lighter, stronger products and increase yield through down-gauging. Consistent properties and tight control of material thickness allow trouble-free, repeatable processing. Ympress can be easily welded and galvanised. Its high surface quality can lead to fewer processing steps.

Applications

  • Agricultural machinery
  • Automotive components
  • Containers
  • Cranes and crane booms
  • Earth-moving equipment
  • Lightweight towers
  • Radiator components
  • Safety-critical applications
  • Racking and shelving
  • Telescopic booms
  • Tow hooks
  • Train carriages
     

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

Ympress ASTM A1011-15 SAE J1392 JIS G3134
  ASTM A1018-16    
Grade Grade Grade Grade
Ympress 40 XK   040 XLK  
Ympress 45 XF - 045 XLF  
Ympress 45 XK HSLAS Grade 45 Class 2 045 XLK SPFH 490
Ympress 45 YF - 045 YLF  
Ympress 45 YK HSLAS Grade 45 Class 1 045 YLK  
Ympress 50 XF HSLAS-F Grade 50 050 XLF SPFH 540
Ympress 50 XK HSLAS Grade 50 Class 2 050 XLK  
Ympress 50 YF - 050 YLF  
Ympress 50 YK HSLAS Grade 50 Class 1 050 YLK  
Ympress 55 XK HSLAS Grade 55 Class 2 -  
Ympress 55 YK HSLAS Grade 55 Class 1 -  
Ympress 60 XF HSLAS-F Grade 60 060 XLF SPFH 590
Ympress 60 XK HSLAS Grade 60 Class 2 060 XLK  
Ympress 60 YF - 060 YLF  
Ympress 60 YK HSLAS Grade 60 Class 1 060 YLK  
Ympress 65 XK HSLAS Grade 65 Class 2 -  
Ympress 65 YK HSLAS Grade 65 Class 1 -  
Ympress 70 XF HSLAS-F Grade 70 070 XLF  
Ympress 70 XK HSLAS Grade 70 Class 2 070 XLK  
Ympress 70 YF - 070 YLF  
Ympress 70 YK HSLAS Grade 70 Class 1 070 YLK  
Ympress 80 XF HSLAS-F Grade 80 080 XLF  
Ympress 80 XK - 080 XLK  
Ympress 100 XF UHSS Grade 100 -  
Ympress S700MC1 - -  
Ympress S960MC1 - -  
1. Tata Steel’s own specification.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 50-Properties

Properties

Properties


Mechanical properties

The values below show the guaranteed mechanical properties of Ympress. Ympress products guarantee tighter limits than ASTM A1011/A1018.
The values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction unless shown otherwise.
The values of the bend test apply to test bars transverse to the rolling direction.

Ympress Grade Ympress 50 XF Ympress 50 YF
Min. yield strength ksi 50 50
Min. tensile strength ksi 60 65
Elingation % t < 0.230 inch 25 25
t ≥ 0.230 inch 23 -
Bend radius   0t 0t
Elongation after fracture A uses test piece length L0 = 2 inches.
Please contact us for further information on Charpy toughness and impact test properties.       
 

The values in the table below are for test pieces taken transverse to the rolling direction for ASTM A1018.

ASTM A1011-15
ASTM A1018-16
Grade HSLAS Grade 50 Class 1 HSLAS Grade 50 Class 2
Min. yield strength ksi 50 50
Min. tensile strength ksi 65 60
Elingation % t < 0.230 inch 22 22
t ≥ 0.230 inch 20 20
Bend radius   2t 1.5t
Elongation after fracture A uses test piece length L0 = 2 inches.
Grades are available with improved formability (F) on request.
Bend test is performed with polished edges, bend line parallel to the rolling direction.
 

Chemical composition

The following tables represent the guaranteed values for Ympress.
All values in weight%.

Tata Steel Grade Ympress 50 XF
C Max. 0.10
Mn Max. 1.40
P Max. 0.020
S Max. 0.005
Si Max. 0.030
Altot Min. 0.015
Cb Max. 0.05
Ti Max. 0.03


Steel supplied against ASTM A1011/A1018 will comply with the chemical limits below.
All values are in weight%. 

ASTM A1011-15

ASTM A1018-16

Grade HSLAS Grade 50 Class 1 HSLAS Grade 50 Class 2
C Max. 0.23 0.15
Mn 1 Max. 1.35 1.35
2 Max. 0.04 0.04
3 Max. 0.04 0.04
Si Max. - -
Altot Min. - -
Cb Min. 0.005 0.005
V Min. 0.005 0.005
1. Mn Grades 45-55 in ASTM A1018 is a 1.5% max.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 50-Dimensions

Dimensions

Dimensions

Dimensional capability (non-pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness  
From - up to Ympress 50
0.060 - 0.070 45
0.070 - 0.080 53
0.080 - 0.090 60
0.090 - 0.100 66
0.100 - 0.110 70
0.110 - 0.120 73
0.120 - 0.130 77
0.130 - 0.190 80
0.190 - 0.230 81
0.230 - 0.500 81
The minimum width is 35 inch.
 

Dimensional capability (pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness  
From - up to Ympress 50
0.060 - 0.070 45
0.070 - 0.080 53
0.080 - 0.090 60
0.090 - 0.100 66
0.100 - 0.110 70
0.110 - 0.120 73
0.120 - 0.130 77
0.130 - 0.190 80
0.190 - 0.200 74
0.200 - 0.210 70
0.210 - 0.220 66
0.220 - 0.230 63
0.230 - 0.500 -
The minimum width is 35 inch.
 

Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 55

Ympress 55
Specification details for Ympress 55 grades

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress grades Overview

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

The high yield strength of Ympress delivers weight savings and increased component strength. This can help you create lighter, stronger products and increase yield through down-gauging. Consistent properties and tight control of material thickness allow trouble-free, repeatable processing. Ympress can be easily welded and galvanised. Its high surface quality can lead to fewer processing steps.

Applications

  • Agricultural machinery
  • Automotive components
  • Containers
  • Cranes and crane booms
  • Earth-moving equipment
  • Lightweight towers
  • Radiator components
  • Safety-critical applications
  • Racking and shelving
  • Telescopic booms
  • Tow hooks
  • Train carriages
     

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

Ympress ASTM A1011-15 SAE J1392 JIS G3134
  ASTM A1018-16    
Grade Grade Grade Grade
Ympress 40 XK   040 XLK  
Ympress 45 XF - 045 XLF  
Ympress 45 XK HSLAS Grade 45 Class 2 045 XLK SPFH 490
Ympress 45 YF - 045 YLF  
Ympress 45 YK HSLAS Grade 45 Class 1 045 YLK  
Ympress 50 XF HSLAS-F Grade 50 050 XLF SPFH 540
Ympress 50 XK HSLAS Grade 50 Class 2 050 XLK  
Ympress 50 YF - 050 YLF  
Ympress 50 YK HSLAS Grade 50 Class 1 050 YLK  
Ympress 55 XK HSLAS Grade 55 Class 2 -  
Ympress 55 YK HSLAS Grade 55 Class 1 -  
Ympress 60 XF HSLAS-F Grade 60 060 XLF SPFH 590
Ympress 60 XK HSLAS Grade 60 Class 2 060 XLK  
Ympress 60 YF - 060 YLF  
Ympress 60 YK HSLAS Grade 60 Class 1 060 YLK  
Ympress 65 XK HSLAS Grade 65 Class 2 -  
Ympress 65 YK HSLAS Grade 65 Class 1 -  
Ympress 70 XF HSLAS-F Grade 70 070 XLF  
Ympress 70 XK HSLAS Grade 70 Class 2 070 XLK  
Ympress 70 YF - 070 YLF  
Ympress 70 YK HSLAS Grade 70 Class 1 070 YLK  
Ympress 80 XF HSLAS-F Grade 80 080 XLF  
Ympress 80 XK - 080 XLK  
Ympress 100 XF UHSS Grade 100 -  
Ympress S700MC1 - -  
Ympress S960MC1 - -  
1. Tata Steel’s own specification.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 55-Properties

Properties

Properties


Mechanical properties

The values below show the guaranteed mechanical properties of Ympress. Ympress products guarantee tighter limits than ASTM A1011/A1018.
The values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction unless shown otherwise.
The values of the bend test apply to test bars transverse to the rolling direction.

Ympress Grade Ympress 55 XK Ympress 55 YK
Min. yield strength ksi 55 50
Min. tensile strength ksi 65 70
Elingation % t < 0.230 inch 22 22
t ≥ 0.230 inch 20 20
Bend radius   0.5t 0.5t
Elongation after fracture A uses test piece length L0 = 2 inches.
Please contact us for further information on Charpy toughness and impact test properties. 

The values in the table below are for test pieces taken transverse to the rolling direction for ASTM A1018.

ASTM A1011-15
ASTM A1018-16
Grade HSLAS Grade 55 Class 1 HSLAS Grade 55 Class 2
Min. yield strength ksi 55 55
Min. tensile strength ksi 70 65
Elingation % t < 0.230 inch 20 20
t ≥ 0.230 inch 18 18
Bend radius   2t 2t
Elongation after fracture A uses test piece length L0 = 2 inches.
Grades are available with improved formability (F) on request.
Bend test is performed with polished edges, bend line parallel to the rolling direction.
 

Chemical composition

The following tables represent the guaranteed values for Ympress.
All values in weight%.

Tata Steel Grade Ympress 55 XF
C Max. 0.10
Mn Max. 1.50
P Max. 0.020
S Max. 0.008
Si Max. 0.030
Altot Min. 0.015
Cb Max. 0.07
Ti Max. 0.03


Steel supplied against ASTM A1011/A1018 will comply with the chemical limits below.
All values are in weight%. 

ASTM A1011-15

ASTM A1018-16

Grade HSLAS Grade 55 Class 1 HSLAS Grade 55 Class 2
C Max. 0.25 0.15
Mn 1 Max. 1.35 1.35
2 Max. 0.040 0.04
3 Max. 0.040 0.04
Si Max. - -
Altot Min. - -
Cb Min. 0.005 0.005
V Min. 0.005 0.005
1. Mn Grades 45-55 in ASTM A1018 is a 1.5% max.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 55-Dimensions

Dimensions

Dimensions

Dimensional capability (non-pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness Max. width
From - up to Ympress 55
0.060 - 0.070 38
0.070 - 0.080 47
0.080 - 0.090 55
0.090 - 0.100 61
0.100 - 0.110 67
0.110 - 0.120 69
0.120 - 0.130 71
0.130 - 0.140 73
0.140 - 0.150 74
0.150 - 0.160 76
0.160 - 0.170 77
0.170 - 0.230 81
0.230 - 0.500 81
The minimum width is 35 inch.
 

Dimensional capability (pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness Max. width
From - up to Ympress 55
0.060 - 0.070 38
0.070 - 0.080 47
0.080 - 0.090 55
0.090 - 0.100 61
0.100 - 0.110 67
0.110 - 0.120 69
0.120 - 0.130 71
0.130 - 0.140 73
0.140 - 0.150 74
0.150 - 0.160 76
0.160 - 0.170 72
0.170 - 0.180 63
0.180 - 0.190 59
0.190 - 0.200 56
0.200 - 0.210 52
0.210 - 0.220 49
0.220 - 0.230 63
0.230 - 0.500 -
The minimum width is 35 inch.
 

Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 60

Ympress 60
Specification details for Ympress 60 grades

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress grades Overview

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

The high yield strength of Ympress delivers weight savings and increased component strength. This can help you create lighter, stronger products and increase yield through down-gauging. Consistent properties and tight control of material thickness allow trouble-free, repeatable processing. Ympress can be easily welded and galvanised. Its high surface quality can lead to fewer processing steps.

Applications

  • Agricultural machinery
  • Automotive components
  • Containers
  • Cranes and crane booms
  • Earth-moving equipment
  • Lightweight towers
  • Radiator components
  • Safety-critical applications
  • Racking and shelving
  • Telescopic booms
  • Tow hooks
  • Train carriages
     

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

Ympress ASTM A1011-15 SAE J1392 JIS G3134
  ASTM A1018-16    
Grade Grade Grade Grade
Ympress 40 XK   040 XLK  
Ympress 45 XF - 045 XLF  
Ympress 45 XK HSLAS Grade 45 Class 2 045 XLK SPFH 490
Ympress 45 YF - 045 YLF  
Ympress 45 YK HSLAS Grade 45 Class 1 045 YLK  
Ympress 50 XF HSLAS-F Grade 50 050 XLF SPFH 540
Ympress 50 XK HSLAS Grade 50 Class 2 050 XLK  
Ympress 50 YF - 050 YLF  
Ympress 50 YK HSLAS Grade 50 Class 1 050 YLK  
Ympress 55 XK HSLAS Grade 55 Class 2 -  
Ympress 55 YK HSLAS Grade 55 Class 1 -  
Ympress 60 XF HSLAS-F Grade 60 060 XLF SPFH 590
Ympress 60 XK HSLAS Grade 60 Class 2 060 XLK  
Ympress 60 YF - 060 YLF  
Ympress 60 YK HSLAS Grade 60 Class 1 060 YLK  
Ympress 65 XK HSLAS Grade 65 Class 2 -  
Ympress 65 YK HSLAS Grade 65 Class 1 -  
Ympress 70 XF HSLAS-F Grade 70 070 XLF  
Ympress 70 XK HSLAS Grade 70 Class 2 070 XLK  
Ympress 70 YF - 070 YLF  
Ympress 70 YK HSLAS Grade 70 Class 1 070 YLK  
Ympress 80 XF HSLAS-F Grade 80 080 XLF  
Ympress 80 XK - 080 XLK  
Ympress 100 XF UHSS Grade 100 -  
Ympress S700MC1 - -  
Ympress S960MC1 - -  
1. Tata Steel’s own specification.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 60-Properties

Properties

Properties


Mechanical properties

The values below show the guaranteed mechanical properties of Ympress. Ympress products guarantee tighter limits than ASTM A1011/A1018.
The values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction unless shown otherwise.
The values of the bend test apply to test bars transverse to the rolling direction.

Ympress Grade Ympress 60 XF Ympress 60 YF
Min. yield strength ksi 60 60
Min. tensile strength ksi 70 75
Elingation % t < 0.230 inch 22 21
t ≥ 0.230 inch 20 -
Bend radius   0t 0t
Elongation after fracture A uses test piece length L0 = 2 inches.
Please contact us for further information on Charpy toughness and impact test properties. 
 

The values in the table below are for test pieces taken transverse to the rolling direction for ASTM A1018.     

ASTM A1011-15
ASTM A1018-16
Grade HSLAS Grade 60 Class 1 HSLAS Grade 60 Class 2
Min. yield strength ksi 60 60
Min. tensile strength ksi 75 70
Elingation % t < 0.230 inch 18 18
t ≥ 0.230 inch 16 16
Bend radius   2.5t 2t
Elongation after fracture A uses test piece length L0 = 2 inches.
Grades are available with improved formability (F) on request.
Bend test is performed with polished edges, bend line parallel to the rolling direction.
 

Chemical composition

The following tables represent the guaranteed values for Ympress.
All values in weight%.

Tata Steel Grade Ympress 60 XF
C Max. 0.10
Mn Max. 1.50
P Max. 0.020
S Max. 0.006
Si Max. 0.030
Altot Min. 0.015
Cb Max. 0.08
Ti Max. 0.05


Steel supplied against ASTM A1011/A1018 will comply with the chemical limits below.
All values are in weight%. 

ASTM A1011-15

ASTM A1018-16

Grade HSLAS Grade 60 Class 1 HSLAS Grade 60 Class 2
C Max. 0.26 0.15
Mn Max. 1.50 1.50
P 2 Max. 0.040 0.040
S 3 Max. 0.040 0.040
Si Max. - -
Altot Min. - -
Cb Min. 0.005 0.005
V Min. 0.005 0.005
 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 60-Dimensions

Dimensions

Dimensions

Dimensional capability (non-pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness Max. width
From - up to Ympress 60
0.060 - 0.070 38
0.070 - 0.080 45
0.080 - 0.090 51
0.090 - 0.100 59
0.100 - 0.110 66
0.110 - 0.120 67
0.120 - 0.130 70
0.130 - 0.140 72
0.140 - 0.150 74
0.150 - 0.160 76
0.160 - 0.170 77
0.170 - 0.230 81
0.230 - 0.500 81
The minimum width is 35 inch.
 

Dimensional capability (pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness Max. width
From - up to Ympress 60
0.060 - 0.070 38
0.070 - 0.080 45
0.080 - 0.090 51
0.090 - 0.100 59
0.100 - 0.110 65
0.110 - 0.120 67
0.120 - 0.130 70
0.130 - 0.140 72
0.140 - 0.150 74
0.150 - 0.160 74
0.160 - 0.170 70
0.170 - 0.180 62
0.180 - 0.190 59
0.190 - 0.200 55
0.200 - 0.210 50
0.210 - 0.220 47
0.220 - 0.500 -
The minimum width is 35 inch.
 

Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 65

Ympress 65
Specification details for Ympress 65 grades

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress grades Overview

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

The high yield strength of Ympress delivers weight savings and increased component strength. This can help you create lighter, stronger products and increase yield through down-gauging. Consistent properties and tight control of material thickness allow trouble-free, repeatable processing. Ympress can be easily welded and galvanised. Its high surface quality can lead to fewer processing steps.

Applications

  • Agricultural machinery
  • Automotive components
  • Containers
  • Cranes and crane booms
  • Earth-moving equipment
  • Lightweight towers
  • Radiator components
  • Safety-critical applications
  • Racking and shelving
  • Telescopic booms
  • Tow hooks
  • Train carriages
     

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

Ympress ASTM A1011-15 SAE J1392 JIS G3134
  ASTM A1018-16    
Grade Grade Grade Grade
Ympress 40 XK   040 XLK  
Ympress 45 XF - 045 XLF  
Ympress 45 XK HSLAS Grade 45 Class 2 045 XLK SPFH 490
Ympress 45 YF - 045 YLF  
Ympress 45 YK HSLAS Grade 45 Class 1 045 YLK  
Ympress 50 XF HSLAS-F Grade 50 050 XLF SPFH 540
Ympress 50 XK HSLAS Grade 50 Class 2 050 XLK  
Ympress 50 YF - 050 YLF  
Ympress 50 YK HSLAS Grade 50 Class 1 050 YLK  
Ympress 55 XK HSLAS Grade 55 Class 2 -  
Ympress 55 YK HSLAS Grade 55 Class 1 -  
Ympress 60 XF HSLAS-F Grade 60 060 XLF SPFH 590
Ympress 60 XK HSLAS Grade 60 Class 2 060 XLK  
Ympress 60 YF - 060 YLF  
Ympress 60 YK HSLAS Grade 60 Class 1 060 YLK  
Ympress 65 XK HSLAS Grade 65 Class 2 -  
Ympress 65 YK HSLAS Grade 65 Class 1 -  
Ympress 70 XF HSLAS-F Grade 70 070 XLF  
Ympress 70 XK HSLAS Grade 70 Class 2 070 XLK  
Ympress 70 YF - 070 YLF  
Ympress 70 YK HSLAS Grade 70 Class 1 070 YLK  
Ympress 80 XF HSLAS-F Grade 80 080 XLF  
Ympress 80 XK - 080 XLK  
Ympress 100 XF UHSS Grade 100 -  
Ympress S700MC1 - -  
Ympress S960MC1 - -  
1. Tata Steel’s own specification.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 65-Properties

Properties

Properties


Mechanical properties

The values below show the guaranteed mechanical properties of Ympress. Ympress products guarantee tighter limits than ASTM A1011/A1018.
The values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction unless shown otherwise.
The values of the bend test apply to test bars transverse to the rolling direction.

Ympress Grade Ympress 65 XF Ympress  65 YF
Min. yield strength ksi 65 65
Min. tensile strength ksi 75 80
Elingation % t < 0.230 inch 19 18
t ≥ 0.230 inch 16 16
Bend radius   0.5t 0.5t
Elongation after fracture A uses test piece length L0 = 2 inches..
Please contact us for further information on Charpy toughness and impact test properties.
 

The values in the table below are for test pieces taken transverse to the rolling direction for ASTM A1018.

ASTM A1011-15
ASTM A1018-16
Grade HSLAS Grade 65 Class 1 HSLAS Grade 65 Class 2
Min. yield strength ksi 65 65
Min. tensile strength ksi 80 75
Elingation % t < 0.230 inch 16 16
t ≥ 0.230 inch 14 14
Bend radius   3t 2.5t
Elongation after fracture A uses test piece length L0 = 2 inches.
Grades are available with improved formability (F) on request.
Bend test is performed with polished edges, bend line parallel to the rolling direction.
 

Chemical composition

The following tables represent the guaranteed values for Ympress.
All values in weight%.

Tata Steel Grade Ympress 65 XF
C Max. 0.10
Mn Max. 1.50
P Max. 0.020
S Max. 0.008
Si Max. 0.030
Altot Min. 0.015
Cb Max. 0.08
Ti Max. 0.05


Steel supplied against ASTM A1011/A1018 will comply with the chemical limits below.
All values are in weight%. 

ASTM A1011-15

ASTM A1018-16

Grade HSLAS Grade 65 Class 1 HSLAS Grade 65 Class 2
C Max. 0.26 0.15
Mn 1 Max. 1.50 1.50
2 Max. 0.040 0.040
3 Max. 0.040 0.040
Si Max. - -
Altot Min. - -
Cb Min. 0.005 0.005
V Min. 0.005 0.005
 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 65-Dimensions

Dimensions

Dimensions

Dimensional capability (non-pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness  
From - up to Ympress 65
0.060 - 0.070 -
0.070 - 0.080 44
0.080 - 0.090 51
0.090 - 0.100 58
0.100 - 0.110 64
0.110 - 0.120 67
0.120 - 0.130 69
0.130 - 0.140 71
0.140 - 0.150 73
0.150 - 0.160 74
0.160 - 0.170 76
0.170 - 0.180 78
0.180 - 0.190 79
0.190 - 0.230 81
0.230 - 0.500 81
The minimum width is 35 inch.
 

Dimensional capability (pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness Max. width
From - up to Ympress 65
0.060 - 0.070 -
0.070 - 0.080 44
0.080 - 0.090 51
0.090 - 0.100 58
0.100 - 0.110 64
0.110 - 0.120 67
0.120 - 0.130 69
0.130 - 0.140 71
0.140 - 0.150 68
0.150 - 0.160 64
0.160 - 0.170 60
0.170 - 0.180 56
0.180 - 0.190 53
0.190 - 0.200 51
0.200 - 0.210 48
0.210 - 0.220 46
0.220 - 0.230 -
The minimum width is 35 inch.
 

Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 70

Ympress 70
Specification details for Ympress 70 grades

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress grades Overview

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

The high yield strength of Ympress delivers weight savings and increased component strength. This can help you create lighter, stronger products and increase yield through down-gauging. Consistent properties and tight control of material thickness allow trouble-free, repeatable processing. Ympress can be easily welded and galvanised. Its high surface quality can lead to fewer processing steps.

Applications

  • Agricultural machinery
  • Automotive components
  • Containers
  • Cranes and crane booms
  • Earth-moving equipment
  • Lightweight towers
  • Radiator components
  • Safety-critical applications
  • Racking and shelving
  • Telescopic booms
  • Tow hooks
  • Train carriages
     

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

Ympress ASTM A1011-15 SAE J1392 JIS G3134
  ASTM A1018-16    
Grade Grade Grade Grade
Ympress 40 XK   040 XLK  
Ympress 45 XF - 045 XLF  
Ympress 45 XK HSLAS Grade 45 Class 2 045 XLK SPFH 490
Ympress 45 YF - 045 YLF  
Ympress 45 YK HSLAS Grade 45 Class 1 045 YLK  
Ympress 50 XF HSLAS-F Grade 50 050 XLF SPFH 540
Ympress 50 XK HSLAS Grade 50 Class 2 050 XLK  
Ympress 50 YF - 050 YLF  
Ympress 50 YK HSLAS Grade 50 Class 1 050 YLK  
Ympress 55 XK HSLAS Grade 55 Class 2 -  
Ympress 55 YK HSLAS Grade 55 Class 1 -  
Ympress 60 XF HSLAS-F Grade 60 060 XLF SPFH 590
Ympress 60 XK HSLAS Grade 60 Class 2 060 XLK  
Ympress 60 YF - 060 YLF  
Ympress 60 YK HSLAS Grade 60 Class 1 060 YLK  
Ympress 65 XK HSLAS Grade 65 Class 2 -  
Ympress 65 YK HSLAS Grade 65 Class 1 -  
Ympress 70 XF HSLAS-F Grade 70 070 XLF  
Ympress 70 XK HSLAS Grade 70 Class 2 070 XLK  
Ympress 70 YF - 070 YLF  
Ympress 70 YK HSLAS Grade 70 Class 1 070 YLK  
Ympress 80 XF HSLAS-F Grade 80 080 XLF  
Ympress 80 XK - 080 XLK  
Ympress 100 XF UHSS Grade 100 -  
Ympress S700MC1 - -  
Ympress S960MC1 - -  
1. Tata Steel’s own specification.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 70-Properties

Properties

Properties


Mechanical properties

The values below show the guaranteed mechanical properties of Ympress. Ympress products guarantee tighter limits than ASTM A1011/A1018.
The values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction unless shown otherwise.
The values of the bend test apply to test bars transverse to the rolling direction.

Ympress Grade Ympress 70 XF Ympress 70 YF
Min. yield strength ksi 70 70
Min. tensile strength ksi 80 85
Elingation % t < 0.230 inch 20 18
t ≥ 0.230 inch 16 -
Bend radius   0.5t 1 0.5t
Elongation after fracture A uses test piece length L0 is 2 inches.
1. Ympress® 70 XF bend radius at thicknesses > 0.236 inch is 1t
Please contact us for further information on Charpy toughness and impact test properties. 


The values in the table below are for test pieces taken transverse to the rolling direction for ASTM A1018

ASTM A1011-15
ASTM A1018-16
Grade HSLAS Grade 70 Class 1 HSLAS Grade 70 Class 2
Min. yield strength ksi 70 70
Min. tensile strength ksi 85 80
Elingation % t < 0.230 inch 14 14
t ≥ 0.230 inch 12 12
Bend radius   3.5t 3t
Elongation after fracture A uses test piece length L0 is 2 inches.
Grades are available with improved formability (F) on request.
Bend test is performed with polished edges, bend line parallel to the rolling direction.
 

Chemical composition

The following tables represent the guaranteed values for Ympress.
All values in weight%.

Tata Steel Grade Ympress 70 XF
C Max. 0.10
Mn Max. 1.65
P Max. 0.020
S Max. 0.005
Si Max. 0.030
Altot Min. 0.015
Cb Max. 0.08
Ti Max. 0.06


Steel supplied against ASTM A1011/A1018 will comply with the chemical limits below.
All values are in weight%. 

ASTM A1011-15

ASTM A1018-16

Grade HSLAS Grade 70 Class 1 HSLAS Grade 70 Class 2
C Max. 0.26 0.15
Mn Max. 1.65 1.65
2 Max. 0.040 0.040
3 Max. 0.040 0.040
Si Max. - -
Altot Min. - -
Cb Min. 0.005 0.005
V Min. 0.005 0.005
 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 70-Dimensions

Dimensions

Dimensions

Dimensional capability (non-pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness Max. width
From - up to Ympress 70
0.060 - 0.070 -
0.070 - 0.080 40
0.080 - 0.090 46
0.090 - 0.100 53
0.100 - 0.110 59
0.110 - 0.120 65
0.120 - 0.130 68
0.130 - 0.140 70
0.140 - 0.150 71
0.150 - 0.160 72
0.160 - 0.170 74
0.170 - 0.180 75
0.180 - 0.190 76
0.190 - 0.200 77
0.200 - 0.210 78
0.210 - 0.220 80
0.220 - 0.230 81
0.230 - 0.500 81
The minimum width is 35 inch.
 

Dimensional capability (pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness Max. width
From - up to Ympress 70
0.060 - 0.070 -
0.070 - 0.080 40
0.080 - 0.090 46
0.090 - 0.100 53
0.100 - 0.110 59
0.110 - 0.120 65
0.120 - 0.130 68
0.130 - 0.140 70
0.140 - 0.150 67
0.150 - 0.160 63
0.160 - 0.170 59
0.170 - 0.180 56
0.180 - 0.190 53
0.190 - 0.200 50
0.200 - 0.210 48
0.210 - 0.220 48
0.220 - 0.230 -
The minimum width is 35 inch.
 

Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 80

Ympress 80
Specification details for Ympress 80 grades

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress grades Overview

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

The high yield strength of Ympress delivers weight savings and increased component strength. This can help you create lighter, stronger products and increase yield through down-gauging. Consistent properties and tight control of material thickness allow trouble-free, repeatable processing. Ympress can be easily welded and galvanised. Its high surface quality can lead to fewer processing steps.

Applications

  • Agricultural machinery
  • Automotive components
  • Containers
  • Cranes and crane booms
  • Earth-moving equipment
  • Lightweight towers
  • Radiator components
  • Safety-critical applications
  • Racking and shelving
  • Telescopic booms
  • Tow hooks
  • Train carriages
     

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

Ympress ASTM A1011-15 SAE J1392 JIS G3134
  ASTM A1018-16    
Grade Grade Grade Grade
Ympress 40 XK   040 XLK  
Ympress 45 XF - 045 XLF  
Ympress 45 XK HSLAS Grade 45 Class 2 045 XLK SPFH 490
Ympress 45 YF - 045 YLF  
Ympress 45 YK HSLAS Grade 45 Class 1 045 YLK  
Ympress 50 XF HSLAS-F Grade 50 050 XLF SPFH 540
Ympress 50 XK HSLAS Grade 50 Class 2 050 XLK  
Ympress 50 YF - 050 YLF  
Ympress 50 YK HSLAS Grade 50 Class 1 050 YLK  
Ympress 55 XK HSLAS Grade 55 Class 2 -  
Ympress 55 YK HSLAS Grade 55 Class 1 -  
Ympress 60 XF HSLAS-F Grade 60 060 XLF SPFH 590
Ympress 60 XK HSLAS Grade 60 Class 2 060 XLK  
Ympress 60 YF - 060 YLF  
Ympress 60 YK HSLAS Grade 60 Class 1 060 YLK  
Ympress 65 XK HSLAS Grade 65 Class 2 -  
Ympress 65 YK HSLAS Grade 65 Class 1 -  
Ympress 70 XF HSLAS-F Grade 70 070 XLF  
Ympress 70 XK HSLAS Grade 70 Class 2 070 XLK  
Ympress 70 YF - 070 YLF  
Ympress 70 YK HSLAS Grade 70 Class 1 070 YLK  
Ympress 80 XF HSLAS-F Grade 80 080 XLF  
Ympress 80 XK - 080 XLK  
Ympress 100 XF UHSS Grade 100 -  
Ympress S700MC1 - -  
Ympress S960MC1 - -  
1. Tata Steel’s own specification.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 80-Properties

Properties

Properties

Mechanical properties

The values below show the guaranteed mechanical properties of Ympress. Ympress products guarantee tighter limits than ASTM A1011/A1018.

The values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction unless shown otherwise.

The values of the bend test apply to test bars transverse to the rolling direction.

Ympress Grade Ympress 80 XF
Min. yield strength ksi 80
Min. tensile strength ksi 90
Elingation % t < 0.230 inch 18
t ≥ 0.230 inch 14
Bend radius   1t
Elongation after fracture A uses test piece length Lis 2 inches.
Please contact us for further information on Charpy toughness and impact test properties.
 

The values in the table below are for test pieces taken transverse to the rolling direction for ASTM A1018

ASTM A1011-15
ASTM A1018-16
Grade HSLAS-F grade 80
Min. yield strength ksi 80
Min. tensile strength ksi 90
Elingation % t < 0.230 inch 18
t ≥ 0.230 inch 16
Bend radius   2t
Elongation after fracture A uses test piece length L0 = 2 inches.
Grade is available with improved formability (F).
Bend test is performed with polished edges, bend line parallel to the rolling direction.
 

Chemical composition

The following tables represent the guaranteed values for Ympress.

All values in weight%.

Tata Steel Grade Ympress 80 XF
C Max. 0.10
Mn Max. 1.65
P Max. 0.020
S Max. 0.005
Si Max. 0.030
Altot Min. 0.015
Cb Max. 0.09
Ti Max. 0.06


Steel supplied against ASTM A1011/A1018 will comply with the chemical limits below.

All values are in weight%. 

ASTM A1011-15

ASTM A1018-16

Grade HSLAS-F Grade 50 Class 1
C Max. 0.15
Mn Max. 1.65
P 1 Max. 0.020
2 Max. 0.025
Si Max. -
Altot Min. -
Cb Min. 0.005
V Min. 0.005
1. P content Grade 80 in ASTM A1018 is a 0.025% max. 
2. S content Grade 80 in ASTM A1018 is a 0.035% max.

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 80-Dimensions

Dimensions

Dimensions

Dimensional capability (non-pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness Max.width
From - up to Ympress 80
0.060 - 0.070 -
0.070 - 0.080 40
0.080 - 0.090 46
0.090 - 0.100 53
0.100 - 0.110 59
0.110 - 0.120 65
0.120 - 0.130 68
0.130 - 0.140 70
0.140 - 0.150 71
0.150 - 0.160 72
0.160 - 0.170 74
0.170 - 0.180 75
0.180 - 0.190 76
0.190 - 0.200 77
0.200 - 0.210 78
0.210 - 0.220 80
0.220 - 0.230 81
0.230 - 0.500 81
The minimum width is 35 inch.
 

Dimensional capability (pickled)

Dimensions in inches.

Ympress / HSLAS grade
Thickness  
From - up to HSLAS-F Grade 80
0.060 - 0.070 -
0.070 - 0.080 40
0.080 - 0.090 46
0.090 - 0.100 53
0.100 - 0.110 59
0.110 - 0.120 65
0.120 - 0.130 68
0.130 - 0.140 70
0.140 - 0.150 67
0.150 - 0.160 63
0.160 - 0.170 59
0.170 - 0.180 56
0.180 - 0.190 53
0.190 - 0.200 50
0.200 - 0.210 48
0.210 - 0.220 46
0.220 - 0.230 -
The minimum width is 35 inch.
 

Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 100

Ympress 100
Specification details for Ympress 100

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress grades Overview

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

The high yield strength of Ympress delivers weight savings and increased component strength. This can help you create lighter, stronger products and increase yield through down-gauging. Consistent properties and tight control of material thickness allow trouble-free, repeatable processing. Ympress can be easily welded and galvanised. Its high surface quality can lead to fewer processing steps.

Applications

  • Agricultural machinery
  • Automotive components
  • Containers
  • Cranes and crane booms
  • Earth-moving equipment
  • Lightweight towers
  • Radiator components
  • Safety-critical applications
  • Racking and shelving
  • Telescopic booms
  • Tow hooks
  • Train carriages
     

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

Ympress ASTM A1011-15 SAE J1392 JIS G3134
  ASTM A1018-16    
Grade Grade Grade Grade
Ympress 40 XK   040 XLK  
Ympress 45 XF - 045 XLF  
Ympress 45 XK HSLAS Grade 45 Class 2 045 XLK SPFH 490
Ympress 45 YF - 045 YLF  
Ympress 45 YK HSLAS Grade 45 Class 1 045 YLK  
Ympress 50 XF HSLAS-F Grade 50 050 XLF SPFH 540
Ympress 50 XK HSLAS Grade 50 Class 2 050 XLK  
Ympress 50 YF - 050 YLF  
Ympress 50 YK HSLAS Grade 50 Class 1 050 YLK  
Ympress 55 XK HSLAS Grade 55 Class 2 -  
Ympress 55 YK HSLAS Grade 55 Class 1 -  
Ympress 60 XF HSLAS-F Grade 60 060 XLF SPFH 590
Ympress 60 XK HSLAS Grade 60 Class 2 060 XLK  
Ympress 60 YF - 060 YLF  
Ympress 60 YK HSLAS Grade 60 Class 1 060 YLK  
Ympress 65 XK HSLAS Grade 65 Class 2 -  
Ympress 65 YK HSLAS Grade 65 Class 1 -  
Ympress 70 XF HSLAS-F Grade 70 070 XLF  
Ympress 70 XK HSLAS Grade 70 Class 2 070 XLK  
Ympress 70 YF - 070 YLF  
Ympress 70 YK HSLAS Grade 70 Class 1 070 YLK  
Ympress 80 XF HSLAS-F Grade 80 080 XLF  
Ympress 80 XK - 080 XLK  
Ympress 100 XF UHSS Grade 100 -  
Ympress S700MC1 - -  
Ympress S960MC1 - -  
1. Tata Steel’s own specification.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 100-Properties

Properties

Properties


Mechanical properties

The values below show the guaranteed mechanical properties of Ympress. Ympress products guarantee tighter limits than ASTM A1011/A1018.

All values for Ympress® 100 XF apply to test pieces perpendicular to the rolling direction (transverse test).

Ympress Grade Ympress 100 XF
Min. yield strength ksi 100
Min. tensile strength ksi 110
Elingation % t < 0.230 inch 15
t ≥ 0.230 inch 15
Bend radius   1t 1
Elongation after fracture A uses test piece length L= 2 inches.
1. Ympress 100 XF bend radius at thicknesses > 0.236 inch is 1.5t
Please contact us for further information on Charpy toughness and impact test properties. 
 

The values in the table below are for test pieces taken transverse to the rolling direction for ASTM A1018.

ASTM A1011-15
ASTM A1018-16
Grade UHSS Grade 100
Min. yield strength ksi 100
Min. tensile strength ksi 110
Elingation % t < 0.230 inch 14
t ≥ 0.230 inch 12
Bend radius   2.5t
Elongation after fracture A uses test piece length L0 = 2 inches.
Bend test is performed with polished edges, bend line parallel to the rolling direction.
 

Chemical composition

The following tables represent the guaranteed values for Ympress.

All values in weight%.

Tata Steel Grade Ympress 100 XF
C Max. 0.08
Mn Max. 2.00
P Max. 0.020
S Max. 0.005
Si Max. 0.15
Altot Min. 0.015
Cb Max. 0.09
Ti Max. -


Steel supplied against ASTM A1011/A1018 will comply with the chemical limits below.

All values are in weight%. 

ASTM A1011-15

ASTM A1018-16

Grade UHSS Grade 100
C Max. 0.15
Mn Max. 2.00
P Max. 0.020
S Max. 0.025
Si Max. -
Altot Min. -
Cb Min. 0.005
V Min. 0.005
 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress 100-Dimensions

Dimensions

Dimensions

Dimensional capability (non-pickled)

Dimensions in inches.

Ympress / UHSS grade
Thickness Max.width
From - up to Ympress 100
0.080 - 0.090 41
0.090 - 0.100 42
0.100 - 0.110 48
0.110 - 0.120 53
0.120 - 0.130 58
0.130 - 0.140 58
0.140 - 0.150 60
0.150 - 0.160 62
0.160 - 0.170 65
0.170 - 0.180 68
0.180 - 0.190 70
0.190 - 0.220 72
0.220 - 0.230 73
0.230 - 0.240 73
0.240 - 0.260 74
0.260 - 0.280 75
0.280 - 0.300 76
0.300 - 0.320 77
0.320 - 0.500 78
The minimum width is 35 inch except for Ympress® 100 / Grade 100 (minimum 39 inch)
Ympress® 100 and Grade 100 thicknesses < 0.118 inch available after consultation.
 

Dimensional capability (pickled)

Please consult us for the available dimensions.
 

Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress S700MC

Ympress S700MC
Specification details for Ympress S700MC

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress grades Overview

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

The high yield strength of Ympress delivers weight savings and increased component strength. This can help you create lighter, stronger products and increase yield through down-gauging. Consistent properties and tight control of material thickness allow trouble-free, repeatable processing. Ympress can be easily welded and galvanised. Its high surface quality can lead to fewer processing steps.

Applications

  • Agricultural machinery
  • Automotive components
  • Containers
  • Cranes and crane booms
  • Earth-moving equipment
  • Lightweight towers
  • Radiator components
  • Safety-critical applications
  • Racking and shelving
  • Telescopic booms
  • Tow hooks
  • Train carriages
     

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

Ympress ASTM A1011-15 SAE J1392 JIS G3134
  ASTM A1018-16    
Grade Grade Grade Grade
Ympress 40 XK   040 XLK  
Ympress 45 XF - 045 XLF  
Ympress 45 XK HSLAS Grade 45 Class 2 045 XLK SPFH 490
Ympress 45 YF - 045 YLF  
Ympress 45 YK HSLAS Grade 45 Class 1 045 YLK  
Ympress 50 XF HSLAS-F Grade 50 050 XLF SPFH 540
Ympress 50 XK HSLAS Grade 50 Class 2 050 XLK  
Ympress 50 YF - 050 YLF  
Ympress 50 YK HSLAS Grade 50 Class 1 050 YLK  
Ympress 55 XK HSLAS Grade 55 Class 2 -  
Ympress 55 YK HSLAS Grade 55 Class 1 -  
Ympress 60 XF HSLAS-F Grade 60 060 XLF SPFH 590
Ympress 60 XK HSLAS Grade 60 Class 2 060 XLK  
Ympress 60 YF - 060 YLF  
Ympress 60 YK HSLAS Grade 60 Class 1 060 YLK  
Ympress 65 XK HSLAS Grade 65 Class 2 -  
Ympress 65 YK HSLAS Grade 65 Class 1 -  
Ympress 70 XF HSLAS-F Grade 70 070 XLF  
Ympress 70 XK HSLAS Grade 70 Class 2 070 XLK  
Ympress 70 YF - 070 YLF  
Ympress 70 YK HSLAS Grade 70 Class 1 070 YLK  
Ympress 80 XF HSLAS-F Grade 80 080 XLF  
Ympress 80 XK - 080 XLK  
Ympress 100 XF UHSS Grade 100 -  
Ympress S700MC1 - -  
Ympress S960MC1 - -  
1. Tata Steel’s own specification.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress S700MC-Properties

Properties

Properties


Mechanical properties

The values below show the guaranteed mechanical properties of Ympress. Ympress products guarantee tighter limits than ASTM A1011/A1018.

The values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction unless shown otherwise.

The values of the bend test apply to test bars transverse to the rolling direction.

Ympress Grade Ympress S700MC
Min. yield strength ksi 101
Tensile strength ksi 108 - 130
Elongation % t < 0.230 inch 14
t ≥ 0.230 inch -
Bend radius   1.5t
Min. elongation after fracture A uses test piece length L0=5.65√S0.
Please contact us for further information on Charpy toughness and impact test properties.
 

Chemical composition

The following tables represent the guaranteed values for Ympress.

All values in weight%.

Ympress Grade Ympress S700MC
C Max. 0.10
Mn Max. 2.10
P Max. 0.020
S Max. 0.005
Si Max. 0.030
Altot Min. 0.015
Cb Max. 0.09
Ti Max. 0.15

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress S700MC-Dimensions

Dimensions

Dimensions

Dimensional capability (non-pickled)

Ympress S700MC is available in the following dimensions. Thickness from 0.157 inch to 0.315 inch; width from 42 inch to 62 inch.


Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply

 

 

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress S960MC

Ympress S960MC
Specification details for Ympress S960MC

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress grades Overview

Overview

Our high-strength steel grades have been developed to meet a wide variety of applications. The consistent quality of these steels means they can be relied on to deliver benefits for your end-products and processes.

The high yield strength of Ympress delivers weight savings and increased component strength. This can help you create lighter, stronger products and increase yield through down-gauging. Consistent properties and tight control of material thickness allow trouble-free, repeatable processing. Ympress can be easily welded and galvanised. Its high surface quality can lead to fewer processing steps.

Applications

  • Agricultural machinery
  • Automotive components
  • Containers
  • Cranes and crane booms
  • Earth-moving equipment
  • Lightweight towers
  • Radiator components
  • Safety-critical applications
  • Racking and shelving
  • Telescopic booms
  • Tow hooks
  • Train carriages
     

Relationship with standards

Tata Steel’s high-strength low-alloy steels comply with the following standards:

Ympress ASTM A1011-15 SAE J1392 JIS G3134
  ASTM A1018-16    
Grade Grade Grade Grade
Ympress 40 XK   040 XLK  
Ympress 45 XF - 045 XLF  
Ympress 45 XK HSLAS Grade 45 Class 2 045 XLK SPFH 490
Ympress 45 YF - 045 YLF  
Ympress 45 YK HSLAS Grade 45 Class 1 045 YLK  
Ympress 50 XF HSLAS-F Grade 50 050 XLF SPFH 540
Ympress 50 XK HSLAS Grade 50 Class 2 050 XLK  
Ympress 50 YF - 050 YLF  
Ympress 50 YK HSLAS Grade 50 Class 1 050 YLK  
Ympress 55 XK HSLAS Grade 55 Class 2 -  
Ympress 55 YK HSLAS Grade 55 Class 1 -  
Ympress 60 XF HSLAS-F Grade 60 060 XLF SPFH 590
Ympress 60 XK HSLAS Grade 60 Class 2 060 XLK  
Ympress 60 YF - 060 YLF  
Ympress 60 YK HSLAS Grade 60 Class 1 060 YLK  
Ympress 65 XK HSLAS Grade 65 Class 2 -  
Ympress 65 YK HSLAS Grade 65 Class 1 -  
Ympress 70 XF HSLAS-F Grade 70 070 XLF  
Ympress 70 XK HSLAS Grade 70 Class 2 070 XLK  
Ympress 70 YF - 070 YLF  
Ympress 70 YK HSLAS Grade 70 Class 1 070 YLK  
Ympress 80 XF HSLAS-F Grade 80 080 XLF  
Ympress 80 XK - 080 XLK  
Ympress 100 XF UHSS Grade 100 -  
Ympress S700MC1 - -  
Ympress S960MC1 - -  
1. Tata Steel’s own specification.

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply Conditions

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish
Oiling Pickled finish is available with rolling
or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress S960MC-Properties

Properties

Properties


Mechanical properties

The values below show the guaranteed mechanical properties of Ympress. Ympress products guarantee tighter limits than ASTM A1011/A1018.
The values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction unless shown otherwise.
The values of the bend test apply to test bars transverse to the rolling direction.

Ympress Grade Ympress S960MC
Min. yield strength ksi 140
Tensile strength ksi 146 - 181
Eliogation % t < 0.230 inch 8
t ≥ 0.230 inch 8
Bend radius   4t
Min. elongation after fracture A uses test piece length L0=5.65√S0.
Please contact us for further information on Charpy toughness and impact test properties.
 

Chemical composition

The following tables represent the guaranteed values for Ympress.
All values in weight%.

Ympress Grade Ympress S960MC
C Max. 0.12
Mn Max. 1.80
P Max. 0.020
S Max. 0.003
Si Max. 0.15
Altot Min. 0.015
Cb Max. 0.05
Ti Max. 0.05

 

EN_US-Engineering-Product-Hot-Rolled-HSS-Ympress S960MC-Dimensions

Dimensions

Dimensions

Dimensional capability (non-pickled)

Ympress S960MC is available in the following dimensions. Thickness from 0.157 inch to 0.394 inch; width from 40 inch to 80 inch.


Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply