SS Grade 33
Specification details for SS Grade 33

EN_US-Engineering-Product-Hot-Rolled-Structural steel-All grades OverviewTSE

Overview

Applications

  • Automotive wheel rims and chassis components
  • Construction and building
  • Cold formed sections
  • Pressure vessels
  • Transport
  • Tubes and pipes
  • Warehouse shelving
  • Lifting and excavating equipment


Relationship with standards

Hot-rolled structural steel complies with standards ASTM A1011 and A1018 and is available in the grades shown in the table below

Grade
SS Grade 30
SS Grade 33
SS Grade 36 type 1
SS Grade 36 type 2
SS Grade 40
SS Grade 45 type 1
SS Grade 45 type 2
SS Grade 50
Grades 45 and 50 only available in ASTM A1011.

The CE mark

The CE mark is a symbol devised by the European Council to signify that a product meets the conditions of the applicable council directives. These conditions aim to ensure that the product is reliable and safe. Products that are “produced for incorporation in a permanent manner in construction works” fall under the Construction Products Directive. Hot-rolled steels covered by EN 10025: 2004 are used in such “works” and are therefore covered by the directive. For these products, Tata Steel’s test certificates bear the CE mark and Tata Steel has issued a certified Declaration of Conformity. All the structural products produced by Tata Steel in Europe are CE-marked except for S185+AR.


.

 

EN_US-Engineering-Product-Hot-rolled-All Grades Surface aspects Supply ConditionsTSE

Supply conditions

Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:

Side/surface condition non-pickled pickled pickled and oiled
Mill edges Yes Yes Yes
Trimmed edges - Yes Yes
 
Trimmed edges available in thicknesses up to 0.25 inch.
The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs. You can find details on how to get in touch with us in 'Contact Us' below.
 

Surface aspects

Description Availability
Surface finish Coils are available in non-pickled and pickled finish for most grades. 
For grade specific availability, please refer to the dimensional tables.
Oiling Pickled finish is available with rolling or preservative oil applied. 
Oil weight normally 55 - 275 mg/ft2

Alternative oiling ranges are available.
Please contact us for details. You can find details on how to get in touch with us in 'Contact Us' below.

 

EN_US-Engineering-Product-Hot-Rolled-Structural steel-SS Grade 33-Properties TSE

Properties

Properties


Mechanical properties

The values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction for A1011 and transverse for A1018.

ASTM A 1011-15
ASTM A 1018-16
Grade SS Grade 33
Yield strength (ksi)   33
Tensile strength (ksi)   52
Elongation (%)  t < 0.064 18
  0.064 ≤ t < 0.097 22
  0.097 ≤ t < 0.230 23
  0.230 ≤ t 22
Elongation after fracture A uses test piece length L0 = 2 inches..
t - material thickness in inch.
Minimum values unless shown otherwise.

Chemical composition 

Structural steel meets the requirements of the heat analysis in the standard, as shown in the table below.
The steel grades supplied by Tata Steel are always fully killed. Tata Steel does not supply steel with increased copper content.

ASTM A1011-15
ASTM A1018-16
Grade SS Grade 33
C Max. 0.25
Mn Max. 0.90
P Max. 0.035
S Max. 0.04
Si Max.
N Max. -
ASTM A1018 has a Mn max. of 1.5%.
ASTM A1018 does not include a Grade 45 or Grade 50.

EN_US-Engineering-Product-Hot-Rolled-Structural steel-SS Grade 33-Dimensions TSE

Dimensions

Dimensions

Dimensional capability (non-pickled)

Dimensions in inches.

Thickness Max. width
From - up to SS Grade 33
0.058 - 0.060 51
0.060 - 0.070 53
0.070 - 0.080 61
0.080 - 0.090 68
0.090 - 0.100 73
0.100 - 0.110 79
0.110 - 0.500 81
The minimum width is 35 inch.
For thicknesses >0.500 inch please contact us.

 

Dimensional capability (pickled)

Dimensions in inches.

Thickness Max. width
From - up to SS Grade 33
0.058 - 0.060 51
0.060 - 0.070 53
0.070 - 0.080 61
0.080 - 0.090 68
0.090 - 0.100 73
0.100 - 0.110 79
0.110 - 0.500 81
The minimum width is 35 inch.

 

Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2007.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Hot-rolled-All grades Shape and dimensional tolerancesTSE

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under.
Tighter tolerances are available as shown below:

Carbon Steel Thickness tolerances available
ASTM A 568 (2015) / A635 (2015)
20 - 40 40 - 48 48 - 60 60 - 72 >72
0.031 - 0.051 0.01 0.01 0.01 0.01 0.01
0.051 - 0.057 0.01 0.012 0.012 0.014 0.014
0.057 - 0.071 0.012 0.012 0.014 0.014 0.014
0.071 - 0.098 0.014 0.014 0.014 0.016 0.016
0.098 - 0.179 0.014 0.016 0.016 0.016 0.016
0.179 - 0.229 0.016 0.018 0.02 0.022 0.024
0.229 - 0.313 0.022 0.024 0.024 0.026 0.03
0.313 - 0.375 0.024 0.026 0.028 0.03 0.032
0.375 - 0.500 0.028 0.028 0.03 0.032 0.036
0.500 - 0.625 0.03 0.03 0.032 0.036 0.038
0.625 - 1.000 0.032 0.032 0.034 0.038 0.04

 

 

HSLA Thickness tolerances available
ASTM A568 (2015) / A635 (2007)
20 - 32 32 - 40 40 - 48 48 - 60 60 - 72 72 - 80 > 80
0.031 - 0.051 0.012 0.012 0.012 0.012 0.012 0.012 0.012
0.051 - 0.059 0.012 0.012 0.014 0.014 0.014 0.014 0.014
0.059 - 0.070 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.070 - 0.082 0.014 0.014 0.014 0.014 0.016 0.016 0.016
0.082 - 0.098 0.014 0.016 0.116 0.016 0.018 0.018 0.02
0.098 - 0.179 0.016 0.016 0.02 0.02 0.022 0.024 0.024
0.179 - 0.229 0.018 0.018 0.02 0.02 0.022 0.024 0.024
0.229 - 0.313 0.022 0.022 0.024 0.024 0.026 0.03 0.03
0.313 - 0.375 0.024 0.024 0.026 0.028 0.03 0.032 0.032
0.375 - 0.500 0.028 0.028 0.028 0.03 0.032 0.036 0.036
0.500 - 0.625 0.03 0.03 0.03 0.032 0.036 0.038 0.038
0.625 - 1.000 0.032 0.032 0.032 0.034 0.038 0.04 0.04

 

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

 

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007). Width tolerances are over, no tolerance under.

Width tolerances available  
Carbon steel ASTM A568: 2015 / A635: 2015
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 0.937 0.125
30 - 35 1.125 0.187
35 - 48 1.125 0.187
48 - 50 1.125 0.25
50 - 60 1.5 0.25
60 - 65 1.5 0.312
65 - 70 1.5 0.312
70 - 78 1.5 0.312
78 - 80 1.875 0.312
80 - 82 1.875 0.375

 

Width tolerances available  
HSLA ASTM A568: 2015 / A635: 2007
Mill edge Cut edge
24 - 26 0.812 0.125
26 - 28 0.937 0.125
28 - 30 1.125 0.125
30 - 35 1.125 0.187
35 - 48 1.25 0.187
48 - 50 1.25 0.25
50 - 60 1.5 0.25
60 - 65 1.625 0.312
65 - 70 1.75 0.312
70 - 78 1.875 0.312
78 - 80 2 0.375
80 - 82 1.875 0.375

 

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description Capability
Coil diameter inner non-pickled 30 inch
Coil diameter inner pickled 24 inch standard
30 inch on request
Tolerance on inner diameter +0/-2 inch
Coil diameter outer non-pickled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 41.5 inch
Coil diameter outer pickled and oiled Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
Max. 86 inch
Min. 65 inch
Coil weight Max. 75,000 lbs
Maximum coil weight limits can vary due to
transport limits and outer coil diameter
Some HR products may have different coil weight ranges
PIW  width ≤ 47 inch 868 - 1288 PIW width
PIW  47 inch < width ≤ 67 inch 868 - 1215 PIW width
PIW  width > 67 inch 616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order Refer to price list for order quantity details
Minimum order quantities may apply