Active solar air heating
Colorcoat Renew SC®

An active solar air heating solution that provides a renewable pre-heat function.

Colorcoat Renew SC® is an active solar air heating solution that provides a renewable pre-heat function for space heating systems. It utilises the energy from the sun to raise the temperature of the external air feed to a conventional heating system and so reduces the amount of energy needed to heat the building to the required temperature. The most suitable types of buildings for this renewable technology are non-domestic buildings in the industrial, commercial or public sectors.

Colorcoat Renew SC® system is low cost, quick to install and has short investment capital paybacks. It consists of an externally mounted pre-finished steel collector that is fixed to the southerly facing wall of a building using standard cladding techniques. It is up to 75% efficient in converting solar radiation into useable heat, and on average 1m2 of collector area delivers 200- 250kWh/year, which will typically fulfil 30-40% of daytime heating demand of suitable buildings.



Tata Steel construction colorcoat renew sc renewables
SBEC building 3 12
Tata Steel construction colorcoat renew
Tata Steel construction colorcoat renew sc renewables
Tata Steel construction colorcoat renew sc renewables
Product specification
Redirecting to /ts/no/hjemmeside Redirecting to /ts/no/hjemmeside.

EN-Construction-Product-Colorcoat Renew SC-default

Colorcoat Renew SC
Specification details
Redirecting to /ts/no/hjemmeside Redirecting to /ts/no/hjemmeside.

EN-Construction-Product-Colorcoat Renew SC | Overview


<p>Colorcoat Renew SC® consists of a micro-perforated pre-finished steel collector installed as an additional skin onto a southerly facing wall of a structurally sound building and sealed at the perimeter. Colorcoat Prisma® pre-finished steel by Tata Steel is used for the solar collector, which can be easily incorporated into the steel building envelope at initial construction phase or retrospectively.</p> <p>The outer perforated skin creates an air transfer cavity or plenum with the supporting wall and pre-finished steel skin. Transition ductwork, installed in a penetration within the supporting wall substructure, transfers heated air from the cavity into the building interior. A fan unit within the building space or within the air handling unit creates negative pressure within the transfer cavity.</p> <p>The pre-finished steel solar collector absorbs solar radiation, developing a boundary layer of solar heated air on the surface of the micro-perforated collector. The renewable, solar heated air layer is drawn through the perforations into and upwards through the cavity into the building and can be distributed directly into the building as ventilation air or ducted into the main heating system to reduce the energy load.</p> <p> </p> <p><img alt="" src="/ts/sites/default/files/Tata%20Steel/content/products/Colorcoat%20Renew%20SC/System%20overview.JPG" style="float: right;"/></p> <p><strong>Benefits of Colorcoat Renew SC®</strong></p> <ul> <li>Provides fresh, warm air for mechanical ventilation and space heating.</li> <li>Fast capital payback of approximately 3-7 years for low initial investment.</li> <li>Sized to meet individual building requirements and specification.</li> <li>High conversion efficiency of ≤75% of solar energy to usable heat energy.</li> <li>Designed to complement primary heating systems, reducing energy demand.</li> <li>Savings in overall heating energy costs of up to 50% on annual heating bills.</li> <li>Simple damper control mechanisms to regulate air flow and temperature.</li> <li>Ideal for commercial and industrial buildings.</li> <li>Utilises freely available, sustainable solar radiation to pre-heat fresh air-feed to a warm air space-heating system.</li> <li>Typically, 1m<sup>2</sup> of collector area delivers approx 200-250kWh/year.</li> <li>Typically supplies 30-40% of daytime heating demand of suitable buildings.</li> <li>Solar collector guaranteed up to 25 years.</li> <li>Quick and easy installation.</li> <li>Minimal maintenance.</li> <li>Blends or contrasts with the building envelope to meet required aesthetics and planning requirements.</li> </ul>

Redirecting to /ts/no/hjemmeside Redirecting to /ts/no/hjemmeside.

EN-Construction-Product-Colorcoat Renew SC | Building integration

Building integration

<p>The Colorcoat Renew SC® system requires a micro-perforated collector and a fan unit for operation. The most straightforward and cost-effective integration of Colorcoat Renew SC® is to install the solar collector as a pre-heater, using the fan of an integrated HVAC air-handling unit to draw the warmed air through the cavity into the HVAC system.</p> <p>Colorcoat Renew SC® is designed to blend seamlessly with your building envelope to provide you with a renewable energy solution that will please both the local community and planners alike. Colorcoat Renew SC® is sized to suit your specific building requirements through assessment of the following considerations:</p> <ul> <li>Level of ventilation (m<sup>3</sup>/s) or air changes required per hour.</li> <li>Heat demand of the building.</li> <li>Temperature set point of the building.</li> <li>Geometry, aspect and location of the building.</li> </ul> <p>Colorcoat Renew SC® uses freely available renewable solar radiation and provides fresh ventilation air that can be easily controlled, in terms of airflow rate and temperature, to maximise occupant comfort in the most sustainable way possible.</p> <p><strong>Suitable building types</strong><br/>Suitable buildings have open, unrestricted internal spaces, for which heating of air is the most efficient and economic medium for occupant comfort, and which benefit from medium to high mechanical air-change or ventilation rates. Suitable building types include factories, workshops, showrooms, offices, schools, hospitals and leisure centres.</p>

Redirecting to /ts/no/hjemmeside Redirecting to /ts/no/hjemmeside.

EN-Construction-Product-Colorcoat Renew SC | System performance

System performance

<p><strong>General design factors</strong><br/>A number of factors will need to be evaluated for an individual building, to determine the optimum Colorcoat Renew SC® collector type and size and airflow requirements. Recommendation of any of our Colorcoat Renew SC® collectors will be determined by the following:</p> <ul> <li>Gross internal dimensions of the space to be heated.</li> <li>Thermal efficiency of the building envelope fabric.</li> <li>Actual building space heat demand (affected by solar heat gain through windows or roof lights).</li> <li>Ventilation requirements.</li> <li>Orientation of the building and environmental shading effects.</li> <li>Available wall space for installation of the collector.</li> </ul> <p><strong>Solar collector orientation</strong><br/>Ideal orientation is south-facing wall elevation. A collector will also provide excellent results on a variation of up to 20<strong>°</strong> from south, and quite acceptable levels of performance will be achievable with orientations 45<strong>°</strong> from due south. A collector facing due east would benefit from early morning solar radiation and a westerly orientation would benefit from the later afternoon solar radiation.</p> <p><strong>Colour selection and influence on performance</strong><br/>Colorcoat Renew SC® utilises Tata Steel’s high performance Colorcoat Prisma® pre-finished steel. The superior solar absorption characteristics, durability and corrosion resistance of Colorcoat Prisma® are key attributes for achieving maximum collector efficiency and longevity.</p> <p>For Colorcoat Renew SC® applications we would recommend dark colours with a high or preferably very high solar thermal performance. In some instances, however, this may not always be possible as the colour choice may be dictated by other aesthetic requirements and building design. </p> <p><strong>Solar thermal performance of Colorcoat Prisma®</strong></p> <p><strong><img alt="" height="460" src="/ts/sites/default/files/Tata%20Steel/content/products/Colorcoat/Colorcoat%20Renew%20SC/Images/Figure2.jpg" width="784"/></strong></p> <p>Metal hand samples are available for all colours. Our hand samples give a true representation on colour and can assist in colour selection and finalising product specification. </p> <p><strong>Order samples online for Colorcoat Prisma®</strong><br/>Please select your chosen Colorcoat Prisma® colour to request samples. Or order samples by contacting the Colorcoat Connection® helpline +44 (0) 1244 892434.</p> <p></p> <p><strong>Solar collector angle tilt</strong><br/>For maximum solar radiation benefit during the heating season, we recommend wall collectors as the most practical and cost-effective to install. A vertical wall is more efficient whilst the sun is lowest in the sky during the winter months, a period when heating demand is likely to be at the maximum.</p> <p><strong>Solar collector shading</strong><br/>Shading of the Colorcoat Renew SC® system should be avoided. Consideration should be given early in the design process to any potential shading from elements such as trees, pylons, chimneys, stacks, surrounding buildings and other landscaping features. Potential shading from any of the above should be taken into account when carrying out a feasibility study or site visit.</p>

Redirecting to /ts/no/hjemmeside Redirecting to /ts/no/hjemmeside.

EN-Construction-Product-Colorcoat Renew SC | Design details

Design details

Looking for help and advice with your collector design and sizing?

The Colorcoat Renew SC® Integrated Sales team of experts are available to offer the support you need and provide you with more detailed information on our solar collector.

Whether you are looking for a more detailed drawing or a copy of our Design guide contact the Colorocoat Connection® helpline on +44 (0) 1244 892434 or E:

Redirecting to /ts/no/hjemmeside Redirecting to /ts/no/hjemmeside.

EN-Construction-Product-Colorcoat Renew SC | CRAFT


<p>To simplify the decisions a designer needs to make when considering the Colorcoat Renew SC® performance factors, Tata Steel has developed CRAFT (Colorcoat Renew SC® Appraisal and Feasibility Tool), a bespoke project appraisal and feasibility tool which is used to determine the potential performance of a Colorcoat Renew SC® system on an individual project.</p> <p>CRAFT is used to perform initial system feasibility assessments based on factors including  building location, aspect, geometry and usage, historical weather data, system colour, heat demand and ventilation needs. The model is focused exclusively on Colorcoat Renew SC® solar air heating systems and the predicted performance and savings available. CRAFT models the building demand and energy balance according to the model described in EN ISO 13790:2008 and uses standard international location-specific weather databases as inputs to deliver project-specific feasibility assessments.</p> <p><img alt="" src="/ts/sites/default/files/Tata%20Steel/content/products/Colorcoat%20Renew%20SC/CRAFT3.jpg"/><img alt="" src="/ts/sites/default/files/Tata%20Steel/content/products/Colorcoat%20Renew%20SC/CRAFT4.jpg"/></p>

Redirecting to /ts/no/hjemmeside Redirecting to /ts/no/hjemmeside.

EN-Construction-Product-Colorcoat Renew SC | Service support

Service support

Our dedicated team of experienced construction professionals have designed Colorcoat Renew SC® and are on-hand to advise you on all aspects of its design, integration and control. They can provide feasibility assessments and estimates of the energy savings and payback period to ensure that you choose the optimum system for your project.

For further information contact Colorcoat Renew SC® Integrated Sales Team


Redirecting to /ts/no/hjemmeside Redirecting to /ts/no/hjemmeside.

EN-Construction-Product-Colorcoat Renew SC | Supply chain partners

Supply chain partners

Colorcoat Renew SC® is readily available through our accredited Supply Chain Partners in various profile shapes and depths. The choice of design allows for integration of the Colorcoat Renew SC® system within the envelope, and will also present various solar absorber plate surface areas to the sun that will influence the development of the boundary solar heat layer. Profile design will also have an impact on heated air movement within the plenum.

For further advice contact Tata Steel or any of its supply chain partners:

Elite 51 from Euroclad

Rainspan SC from Eurobond

Redirecting to /ts/no/hjemmeside Redirecting to /ts/no/hjemmeside.

EN-Construction-Product-Colorcoat Renew SC-downloads