Dimensions

Dimensional capability

Galvanised (GI) products

Dimensions in mm.

Thickness Max. width
From - up to CR DP600
0.70 - 0.80 1600
0.80 - 0.90 1625
0.90 - 1.00 1650
1.00 - 1.10 1700
1.10 - 1.20 1710
1.20 - 1.30 1715
1.30 - 1.40 1720
1.40 - 1.50 1730
1.50 - 1.55 1735
1.55 - 1.60 1740
1.60 - 1.70 1700
1.70 - 1.80 1650
1.80 - 1.90 1560
1.90 - 2.00 1500
The minimum width is 1000 mm.
Width refers to mill edge. Side-trimmed product is available on request.
For the dimensions of CR DP600 GA and CR DP600 ZM please contact us for details.
The tightest available thickness tolerances are according to the ‘Special’ tolerances of EN 10143:2006.
 

Tolerances

Tolerances comply with standard EN 10143: 2006.
Tighter tolerances are available - please contact us for details.