Dimensions

Dimensional capability

Galvanised (GI) products

Dimensions in mm.

Thickness Max. width
From - up to CR DP800
0.70 - 1.00 1240
1.00 - 1.10 1470
1.10 - 1.50 1540
1.50 - 1.55 1505
1.55 - 1.70 1470
1.70 - 1.80 1430
1.80 - 2.00 1400
The minimum width is 1000 mm.
Width refers to mill edge. Side-trimmed product is available on request.
The tightest available thickness tolerances are according to the ‘Special’ tolerances of EN 10143:2006.
 

Tolerances

Tolerances comply with standard EN 10143: 2006.
Tighter tolerances are available - please contact us for details.