Dimensions

Dimensional capability

Galvanised (GI) products

Dimensions in mm.

Thickness Max. width
From - up to CR DP1000LY
0.80 - 0.90 1000
0.90 - 1.00 1260
1.00 - 1.10 1300
1.10 - 1.20 1320
1.20 - 1.30 1340
1.30 - 2.00 -
The minimum width is 900 mm.
Width refers to mill edge. Side-trimmed product is available on request.
The tightest available thickness tolerances are according to the ‘Special’ tolerances of EN 10143:2006.
 

Tolerances

Tolerances comply with standard EN 10143: 2006.
Tighter tolerances are available - please contact us for details.