Applications
- Automotive components
- Domestic appliance components
- Furniture
- Switch gear panels
- Wheel rims
- Tubes and sections
Relationship with standards
Tata Steel offers hot-rolled steel for forming in grades that comply with EN 10111: 2008 and in special Tata Steel grades as shown in the table below.
All grades are available in qualities suitable for galvanising.
As the EN standard applies only to steel ≤ 11mm thick, please consult us about the properties of steel in other thicknesses.
European standard |
---|
EN 10111: 2008 |
DD11 2 |
DD12 |
DD13 |
DD13WR 1 |
DD14 |
DD14+ 1 |
1. Not in EN 10111: 2008 . Tata Steel’s own specification.
2. DD11 products should be used within one month of their availability.
Supply - product conditions
Hot-rolled steel can be supplied with these product conditions and finishes and with this surface treatment:
Side/surface condition |
non-pickled |
pickled |
pickled and oiled |
---|---|---|---|
Mill edges |
Yes |
Yes |
Yes |
Trimmed edges |
- |
Yes |
Yes |
Trimmed edges available in thicknesses up to 8.0 mm. The steel grades shown on the following pages belong to the standard range offered by Tata Steel.
Please contact us regarding other specifications we may have that meet your needs.
Surface aspects
Description |
Availability |
---|---|
Surface finish |
Coils are available in non-pickled and pickled finish |
Oiling |
Pickled finish is available with rolling or preservative oil applied |
|
Oil weight normally 0.5-2.5 g/m2 |
Alternative oiling ranges are available – please contact us for details.