Dimensions
Dimensions
Dimensional capability – non-pickled.
Dimensions in mm.
| Thickness | Max. width |
|---|---|
| From - up to | DD11 |
| 1.47 - 1.50 | 1300 |
| 1.50 - 1.60 | 1330 |
| 1.60 - 1.70 | 1405 |
| 1.70 - 1.80 | 1480 |
| 1.80 - 1.90 | 1555 |
| 1.90 - 2.00 | 1630 |
| 2.00 - 2.20 | 1705 |
| 2.20 - 2.40 | 1820 |
| 2.40 - 2.50 | 1925 |
| 2.50 - 2.60 | 1970 |
| 2.60 - 2.70 | 2020 |
| 2.70 - 20.00 | 2070 |
The minimum width is 900 mm. Widths smaller than 900 mm are available - please contact us.
EN10111: 2008 only specifies material up to 11 mm thick.
Material exceeding this thickness is supplied to Tata Steel own specification.
Dimensional capability – pickled.
Dimensions in mm.
| Thickness | Max. width |
|---|---|
| From - up to | DD11 |
| 1.50 - 1.60 | 1330 |
| 1.60 - 1.70 | 1405 |
| 1.70 - 1.80 | 1480 |
| 1.80 - 1.90 | 1555 |
| 1.90 - 2.00 | 1630 |
| 2.00 - 2.20 | 1705 |
| 2.20 - 2.40 | 1820 |
| 2.40 - 2.50 | 1925 |
| 2.50 - 2.60 | 1970 |
| 2.60 - 2.70 | 2020 |
| 2.70 - 12.25 | 2070 |
| 12.25 - 15.25 | 1600 |