Typical properties

Typical property tables for Advantica® L Décor (Internal and External)

Advantica® L Décor Internal

Properties     Test Standard
Nominal organic
coating thickness
μm 120 to 200 EN 13523-1
Adhesion after indentation   Pass EN 13523-6
Flexibility
(minimum bend radius)
T 1 EN 13523-7
Scratch resistance g 4000 EN 13523-12
Abrasion resistance
(Taber, 250 rev.
1kg, CS10 wheels)
mg <15 EN 13523-16
Corrosion resistance: 
Neutral salt spray
hours 500 EN 13523-8
Corrosion resistance: 
Humidity
hours 1500 EN 13523-26

 

Advantica® L Décor External

Properties     Test Standard
Nominal organic
coating thickness
μm 120 to 200 EN 13523-1
Adhesion after indentation   Pass EN 13523-6
Flexibility
(minimum bend radius)
T 1 EN 13523-7
Scratch resistance g 4000 EN 13523-12
Abrasion resistance
(Taber, 250 rev.
1kg, CS10 wheels)
mg <15 EN 13523-16
Corrosion resistance: 
Neutral salt spray
hours 500 EN 13523-8
Corrosion resistance: 
Humidity
hours 1500 EN 13523-26
Resistance to UV ageing contrast ≥2 after
4000 hours
Test according to
EN ISO 4892 - 2/A
Assessment
according to
DIN EN 20105-A02

Notes

The figures contained in this table are typical properties and do not constitute a
specification. If forming pre-finished steel below 16°C please consult Tata Steel for further
information.

Corrosion and humidity performance subject to specification such as minimal metallic
coating weight.

If you have any questions or for further information click here to contact us.