Exceptional performance
Designed to withstand even the most demanding and aggressive environments, Colorcoat HPS200 Ultra® pre-finished steel provides super durability and corrosion resistance. Whatever your type of building, from warehouses to houses, retail outlets to processing plants, Colorcoat HPS200 Ultra® demonstrates proven performance and reliability.
Unrivalled corrosion protection
Colorcoat HPS200 Ultra® uses the unique and proven Galvalloy® metallic coating by Tata Steel. Galvalloy® is made with a special mix of 95% Zinc (Zn) and 5% Aluminium (Al) that conforms to EN 10346:2015. The carefully developed proportions of Zinc and Aluminium in Galvalloy® offers a combination of increased barrier and sacrificial protection when compared with conventional Hot Dip Galv (HDG) coatings and provides unrivalled corrosion protection, even at the cut edges.
Hand samples
Metal hand samples are available for all colours. For a truer representation of colour and effect, please obtain metal hand samples. Only Signature colours are available outside Zone 1 and Zone 2 areas.
Colour consistency
If tonal consistency is critical, all cladding for a single elevation should come from the same production batch. All metallic shades exhibit a degree of directionality.
Matching components
If accessories made from other materials are to be colour-matched to the roof or wall cladding, the best reference is the actual profiles or panels delivered to site, or material from the same batch.
Typical properties
| Properties | Test Standard | ||
|---|---|---|---|
| Nominal organic coating thickness |
(μm)* | 200 | EN 13523-1 |
| Specular gloss (60°): Non-matt colours |
% | 20-40 | EN 13523-2 |
| Specular gloss (60°): Matt colours |
% | <10 | EN 13523-2 |
| Scratch resistance | (g) | >5000 | EN 13523-12 |
| Abrasion resistance (Taber, 250 rev, 1kg) |
(mg) | <12 | EN 13523-16 |
| Flexibility: Minimum bend radius |
(T) | 0T (16°C) | EN 13523-7 |
| Flexibility: Minimum bend radius |
(T) | 1T (0°C) | EN 13523-7 |
| Flexibility: Reverse impact |
(J) | ≥18 | EN 13523-5 |
| Flexibility: Adhesion (cross hatch) |
(%) | 100 | EN 13523-6 |
| Maximum continuous operating temperature |
(°C) | 60 | |
| Corrosion resistance: Salt spray |
(h) | 1000 | EN 13523-8 |
| Corrosion resistance: Humidity |
(h) | 1500 | EN 13523-26 |
| Corrosion resistance category |
RC5 | EN 10169:2010 | |
| UV resistance category |
Ruv4 | EN 10169:2010 | |
| Internal environment classification |
CPI5 | EN 10169:2010 |
*μm = micron
Notes
1. The figures contained in this table are typical properties and do not constitute a specification. Tested in accordance with EN 13523.
2. For health and safety datasheets contact the Colorcoat Connection® helpline.