Structural profile specification
RoofDek Tata Steel construction decking

RoofDek D35 is part of the shallow deck profile range which enables designers to find the balance between efficiency, aesthetics and structural performance. 

Profile Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum factory curve (mm) Cantillever (mm)
D35 Steel 0.70 Interior Liner & Galvatite 7.08 1803 2519 40 400 470
Steel 0.90 Interior Liner & Galvatite 9.11 2114 2835 50 400 529
Steel 1.20 Interior Liner & Galvatite 12.16 2404 3224 60 - 601
Aluminium 0.90 Stucco 3.16 1311 1960 40 400 378
Aluminium 1.20 Mill 4.21 1525 2267 50 - 423

Notes
1. When RoofDek is supplied with Colorcoat HPS200 Ultra® pre finished steel, the above load span tables do not apply. Please contact our technical team for the load span tables in this instance.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min. flange steel beam.
4. Load spans calculated to Eurocode 3 and 9.