Properties

Properties


Mechanical properties

Metallic coated steel for forming has the following mechanical properties. These are measured transverse to the rolling direction.
Property range is indicated according to EN 10346, but properties meet equivalent VDA 239-100 specifications also.

  Grade DX54-GI DX54-GA/ZM
Yield strength Re N/mm² 120 - 220 120 - 220
Tensile strength Rm N/mm² 260 - 350 260 - 350
Elongation % 36 34
Min. r-value   1.6 1.4
Min. n-value   0.18 0.18
If the yield point is not pronounced, the values apply to the 0.2% - proof strength Rp0.2 ; if the yield strength is pronounced, the values apply to the lower yield point ReL.
Decreased minimum elongation values apply for product thickness t ≤ 0.50 mm (minus 4 units) and for 0.50 mm ≤ t ≤ 0.70 mm (minus 2 units).
Elongation after fracture A uses test piece length L0 = 80 mm.
For t > 1.5 mm, the minimum r90 - value reduced by 0.2 applies.
 

Chemical composition

Tata Steel complies with the following cast analysis:

  Grade DX54
C Max. 0.12
Mn Max. 0.60
P Max. 0.10
S Max. 0.045
Al Min. -
N Max. -
Ti Max. 0.30
All values are in weight%.