Dimensions

Dimensional capability

Galvanised (GI) products

Dimensions in mm.

Thickness Max. width
From - up to DX52
0.40 - 0.55 1520
0.55 - 0.60 1590
0.60 - 0.65 1770
0.65 - 0.70 1870
0.70 - 0.75 1890
0.75 - 0.80 1990
0.80 - 1.70 2020
1.70 - 2.00 1970
2.00 - 2.50 1580
2.50 - 3.50 1540
3.50 - 3.60 1500
3.60 - 3.70 1450
3.70 - 3.85 1400
3.85 - 4.00 1350
The minimum width is 900 mm.
Widths smaller than 900 mm are available on request. Please contact us.
Surface conditions MB, MC are available, as well as Serica® premium surface finish.
Serica® availability can be found in our dedicated Serica page.
Please contact us on the availability of:
- specific coating weights
- surface condition MC with a thickness greater than 1.2 mm.
 

Galvannealed (GA) products

Dimensions in mm.

Thickness Max. width
From - up to DX52
0.50 - 0.60 1420
0.60 - 0.65 1700
0.65 - 1.45 1850
1.45 - 1.50 1850
1.50 - 1.60 1830
1.60 - 1.70 1710
1.70 - 1.75 1660
1.75 - 1.80 1620
1.80 - 1.90 1530
1.90 - 2.00 1440
The minimum width is 900 mm.
 

MagiZinc® (ZM) products

Dimensions in mm.

Thickness Max. width
From - up to DX52
0.40 - 0.45 1520
0.45 - 0.60 1520
0.60 - 1.20 1550
1.20 - 2.00 1550
The minimum width is 900 mm.
 

Tolerances

Tolerances comply with standard EN 10143 2006.
Tighter tolerances are available, please contact us for details.