Dimensions
Dimensional capability
Galvanised (GI) and MagiZinc® (ZM) products
Dimensions in mm.
| Thickness | Max. width |
|---|---|
| From - up to | DX53 |
| 0.45 - 0.50 | 1520 |
| 0.50 - 0.55 | 1540 |
| 0.55 - 0.60 | 1640 |
| 0.60 - 0.65 | 1740 |
| 0.65 - 0.70 | 1830 |
| 0.70 - 0.75 | 1910 |
| 0.75 - 0.80 | 1950 |
| 0.80 - 1.20 | 2000 |
| 1.20 - 1.30 | 1940 |
| 1.30 - 1.40 | 1890 |
| 1.40 - 1.50 | 1830 |
| 1.50 - 1.60 | 1740 |
| 1.60 - 1.65 | 1670 |
| 1.65 - 1.70 | 1640 |
| 1.70 - 1.75 | 1600 |
| 1.75 - 1.80 | 1570 |
| 1.80 - 1.90 | 1530 |
| 1.90 - 2.00 | 1450 |
The minimum width is 900 mm.
Widths smaller than 900 mm are available on request. Please contact us.
Surface conditions MB, MC are available, as well as Serica® premium surface finish.
Serica® availability can be found in our dedicated Serica page.
Please contact us on the availability of:
- specific coating weights
- surface condition MC with a thickness greater than 1.2 mm.
Galvannealed (GA) products
Dimensions in mm.
| Thickness | Max. width |
|---|---|
| From - up to | DX53 |
| 0.50 - 0.60 | 1420 |
| 0.60 - 0.65 | 1700 |
| 0.65 - 1.45 | 1850 |
| 1.45 - 1.50 | 1850 |
| 1.50 - 1.60 | 1830 |
| 1.60 - 1.70 | 1710 |
| 1.70 - 1.75 | 1660 |
| 1.75 - 1.80 | 1620 |
| 1.80 - 1.90 | 1530 |
| 1.90 - 2.00 | 1440 |
The minimum width is 900 mm.
Tolerances
Tolerances comply with standard EN 10143 2006.
Tighter tolerances are available, please contact us for details.