Dimensions

Dimensional capability

Galvanised (GI) products

Dimensions in mm.

Thickness Max. width
From - up to DX56
0.45 - 0.50 1350
0.50 - 0.55 1500
0.55 - 0.60 1620
0.60 - 0.65 1730
0.65 - 0.70 1870
0.70 - 1.20 1970
1.20 - 1.30 1940
1.30 - 1.60 1840
1.60 - 1.65 1800
1.65 - 1.70 1800
1.70 - 1.80 1750
1.80 - 1.90 1630
1.90 - 2.00 1530
The minimum width is 900 mm.
Widths smaller than 900 mm may be available - please contact us.
Surface conditions MB, MC are available, as well as Serica® premium surface finish.
Serica® availability can be found in our dedicated Serica page.
Please contact us on the availability of:
- specific coating weights
- surface condition MC with a thickness greater than 1.2 mm.
 

Galvannealed (GA) products

Dimensions in mm.

Thickness Max. width
From - up to DX56
0.50 - 0.60 1420
0.60 - 0.65 1700
0.65 - 1.45 1850
1.45 - 1.50 1800
1.50 - 1.60 1700
1.60 - 1.70 1600
1.70 - 1.75 1550
The minimum width is 900 mm.
 

MagiZinc® (ZM) products

Dimensions in mm.

Thickness  
From - up to DX56
0.40 - 0.45 -
0.45 - 0.60 1520
0.60 - 1.20 1550
1.20 - 2.00 -
The minimum width is 900 mm.
 

Tolerances

Tolerances comply with standard EN 10143 2006.
Tighter tolerances are available, please contact us for details.