Galvanised (GI) products
Dimensions in mm.
|From - up to||DX57|
|0.50 - 0.55||1470|
|0.55 - 0.60||1590|
|0.60 - 0.65||1710|
|0.65 - 0.70||1840|
|0.70 - 1.25||1800|
|1.25 - 1.50||1790|
The minimum width is 900 mm.
Widths smaller than 900 mm are available on request. Please contact us.
Surface conditions MB, MC are available, as well as Serica® premium surface finish.
Serica® availability can be found in our dedicated Serica page.
Please contact us on the availability of:
- specific coating weights
- surface condition MC with a thickness greater than 1.2 mm.
For DX57-GA products, please contact us for available widths.
For DX57-ZM products, please contact us for available widths.
Tolerances comply with standard EN 10143 2006.
Tighter tolerances are available, please contact us for details.