Galvanised (GI) products
Dimensions in mm.
|From - up to||CR IF180|
|0.65 - 0.70||1265|
|0.70 - 0.75||1440|
|0.75 - 0.80||1465|
|0.80 - 1.20||1535|
|1.20 - 1.50||1625|
|1.50 - 1.90||1615|
|1.90 - 2.00||1585|
Minimum width is 900 mm.
Widths under 900 mm are available on request - please contact us.
Please contact us on the availability of:
- Surface quality C with a thickness greater than 1.2 mm
- Galvannealed (GA) high-strength grades
- Serica® premium surface quality
Other dimensions are available on request - please contact us.
Tolerances comply with standard EN 10143: 2006.
Tighter tolerances are available - please contact us for details.