Dimensions

Dimensional capability

Galvanised (GI) products

Dimensions in mm.

Thickness Max. width
From - up to CR IF220
0.45 - 0.50 1350
0.50 - 0.55 1500
0.55 - 0.60 1640
0.60 - 0.65 1760
0.65 - 0.70 1830
0.70 - 0.75 1850
0.75 - 0.80 1880
0.80 - 0.90 1910
0.90 - 1.10 1970
1.10 - 1.20 1920
1.20 - 1.30 1870
1.30 - 1.40 1820
1.40 - 1.50 1720
1.50 - 1.60 1640
1.60 - 1.70 1570
1.70 - 1.75 1500
1.75 - 1.80 1460
1.80 - 1.90 1390
1.90 - 2.00 1330
Minimum width is 900 mm.
Widths under 900 mm are available on request - please contact us.
Please contact us on the availability of:
- Surface quality C with a thickness greater than 1.2 mm
- Galvannealed (GA) high-strength grades
- High-strength grades with MagiZinc (+ZM) coating
Other dimensions are available on request - please contact us.
 

Tolerances

Tolerances comply with standard EN 10143: 2006.
Tighter tolerances are available - please contact us for details.