EN-Engineering-Product-Hot-Rolled-Durbar floor plate-Enquiry tab
<iframe src="https://app.smartsheet.com/b/form/0bcbbf8c58c14515a4204edea8f14ba6"></iframe>
FLOORPLATE
EN-Engineering-Product-Hot-Rolled-Durbar floor plate-All grades-Downloads
The following downloads are available:
EN-Engineering-Product-Hot-Rolled-Durbar floor plate-All grades-FAQs
Frequently Asked Questions (FAQs)
What is the fire resistance of Durbar?
Durbar hot rolled steel floor plate is classed as non-combustible. When subjected to extreme heat, Durbar has distinct advantages over some other flooring materials. At temperatures where aluminium alloys have already begun to melt, Durbar steel floor plate will still be supporting design loads.
EN-Engineering-Product-Hot-Rolled-Durbar floor plate-All grades-Proven slip-resistance
Unique self-draining stud pattern provides a slip-resistant surface
Keeping you safe
According to the UK Health and Safety Executive (HSE), over a third of all major injuries reported in the UK each year are caused as a result of a slip or trip1. That amounts to 172,000 injuries to workers every year, not counting injuries to the general public.
EN-Engineering-Product-Hot-Rolled-Durbar floor plate-All grades-Design
Using Durbar®
Durbar is a non-slip raised pattern floor plate of integral manufacture (the pattern is rolled in not welded). The "tear drop" studs are distributed to give maximum slip resistance in a variety of applications whilst ensuring a free draining surface.
The nominal gauge of Durbar is the thickness of the plain plate exclusive of pattern.
EN-Engineering-Product-Hot-Rolled-Durbar floor plate-S355JR+AR-Dimensions
Dimensions
Dimensions in mm.
EN-Engineering-Product-Hot-Rolled-Durbar floor plate-S275JR+AR-Dimensions
Dimensions
Dimensions in mm.
EN-Engineering-Product-Hot-Rolled-Durbar floor plate-S235JR+AR-Dimensions
Dimensions
Dimensions in mm.
EN-Engineering-Product-Hot-Rolled-Durbar floor plate-S355JR+AR-Properties
Mechanical Properties
The mechanical properties of Durbar® comply with EN 10025-2: 2004 and are shown in the table below. The values shown for strength and elongation are for test pieces taken transverse to the rolling direction; those for the impact test are for test pieces taken in the rolling direction.