Ymagine 50 XF
Specification details for Ymagine 50 XF

EN_US-Engineering-Product-Direct-Rolled-HSS-Ymagine 50-Properties TSN

Properties

Properties


Relationship with standards and mechanical properties

The values shown for the mechanical properties in the table below are for test pieces taken longitudinal to the rolling direction.

Tata Steel grade   Ymagine 50 XF
ASTM A 1011: 2007 Hot-rolled flat products HSLAS-F grade 50
Yield strength ksi ≥ 50
Tensile strength ksi ≥ 60
Elongation % ≥ 22
 
Tata Steel grade   Ymagine 50 XF
ASTM A 1008: 2013 Cold-rolled flat products HSLAS-F grade 50
Yield strength ksi ≥ 50
Tensile strength ksi ≥ 60
Elongation % ≥ 22

 

Tata Steel grade Direct-rolled flat products Ymagine 50 XF
    Typical value Guaranteed values
Yield strength ksi 55 50 - 70
Tensile strength ksi 66 60 - 75
Elongation (2 inch) % 29 ≥ 22
Min. Elongation after fracture uses test piece length L0 is 2 inches.
Please contact us for further information on Charpy toughness and impact test properties.
 

Chemical composition

Heat analysis in weight percentages.

Tata Steel grade Ymagine 50 XF
  Typical Guaranteed (max)
C 0.045 0.065
Mn 0.500 0.800
P 0.008 0.020
S 0.006 0.015
Si 0.018 0.035
Cb 0.013 0.020
For the purpose of batch galvanizing, Ymagine high-strength steels can be ordered on consultation with a maximum Si content of 0.030%..

EN_US-Engineering-Product-Direct-rolled-HSS-Ymagine 50-Dimensions TSN

Dimensions

Dimensions
 

Dimensional capability (pickled)

Dimensions in inches.

Thickness Maximum width
From - up to Ymagine® 50 XF
0.045 - 0.047 -
0.047 - 0.059 60
0.059 - 0.079 60
0.079 - 0.118 60
Minimum width is 39.37 inch.
Other dimensions may be available - please contact us.
 

Tolerances on thickness

Tolerances for wide strip and slit wide strip comply with standard ASTM A568: 2007 and A635: 2015.
Tighter tolerances are available, please contact us. Tolerances are over, no under.

 

EN_US-Engineering-Product-Direct-rolled-All grades Shape and dimensional tolerancesTSN

Shape and dimensional tolerances

Shape and dimensional tolerances
 

Tolerances on thickness

Ymagine® is available with the following tolerances. Thickness tolerances over, no tolerance under.
Dimensions in inches.

Thickness Tolerances
0.045 ≤ t ≤ 0.078 0.004
0.078 < t ≤ 0.098 0.005 1
0.098 < t ≤ 0.118 0.006 2
1. In some instances, the material will be supplied with a total tolerance of 0.009 inch, only on the coil head and tail and to a maximum of 66 ft. from the start of the coil.
2. In some instances, the material will be supplied with a total tolerance of 0.010 inch, only on the coil head and tail and to a maximum of 66 ft. from the start of the coil.
 

Tolerances on width

Width tolerances comply with standard ASTM A568: 2011
Width tolerances over, no tolerance under.
Closer tolerances are possible – please contact us.
 

Dimensions and coil weights

The weight of weldless coils can be specified freely between 560 and 1148 PIW.
Ymagine is supplied with trimmed edges as standard. Mill edges are available on request.

Description Dimension or weight
Outside diameter minimum 41.4 inch
  maximum 78.74 inch (Ymagine®)
  maximum 87.67 inch (mill scale)
Coil weight maximum 69,500 lbs 1
PIW minimum 560 PIW
maximum 1148 PIW
1. For Ymagine 70 XF the maximum coil weight is 55,000 lbs for thicknesses > 0.098 inch.

Tata Steel assumes a minimum and a maximum coil weight agreed upon with the customer on the basis of our normal production practices and an order quantity corresponding to this coil weight.
Usually a minimum coil weight up to 90% of the maximum coil weight can be requested.
 

Surface aspects

The surface quality of Ymagine is comparable to that of hot-rolled steel.
The roughness is comparable to hot-rolled pickled and oiled material i.e. 35 - 100 μinch CLA.
Ymagine is suitable for cold-rolled applications that are not surface-critical.