Steel for forming
Our cold-rolled forming steels are available in a wide range of grades and corrosion-resistant coatings.
Each grade is designed for specific applications and comes with a choice of surface quality. Extensive dimensional choice provides opportunities for cutting waste and maximizing yield.
MagiZinc® improves corrosion resistance with half the thickness of conventional zinc coatings, increasing yield, reducing cost and facilitating stronger, lighter products. It offers improved automotive corrosion protection and higher process efficiency.
Applications
- Automotive components
- Building components
- Domestic appliances
- Drain pipes
- Electrical goods
- Tubes and sections
EN_US-Engineering-Product-Metallic coated-Forming-CS TYPE TSE
EN_US-Engineering-Product-Metallic coated-Forming-All Grades OverviewTSE
Applications:
- Automotive components
- Building components
- Domestic appliances
- Electrical goods
- Tubes and sections
Relationship with standards
| ASTM A653: 2008 | ISO standard 3575 | SAE | JIS G3302-98 | |
|---|---|---|---|---|
| Designation | Name | Designation | ||
| CS type A | Commercial, lock forming | 01, 02 | - | SGCC + SGCH |
| CS type B | Commercial, lock forming | 01, 02 | - | - |
| CS type C | Commercial, lock forming | 01, 02 | - | - |
| FS type A | Drawing | 3 | - | - |
| FS type B | Deep drawing | 4 | - | - |
| DDS type A | Deep drawing special killed | 5 | - | - |
| EDDS | Extra deep drawing stabilized | 6 | - | SGCD2 |
See dimensional tables for available coating types per grade.
EN_US-Engineering-Product-Metallic coated-All Grades Coatings Surface aspectsTSE
Surface Aspects
Surface quality
Surface quality complies with ASTM standards A653: 2008 and A924: 2009. The products can be delivered with the following coating/surface types:
Minimized spangle (standard surface)
Imperfections such as pimples, marks, scratches, pits, variations in surface appearance, dark spots, stripe marks and light passivation stains are permissible.
Stretch levelling breaks or run-off marks may appear. Coil breaks and stretcher strains may also appear.
Minimized spangle temper rolled (improved surface)
With this surface quality, small imperfections such as stretch levelling breaks, skin pass marks, slight scratches, indentations, surface structure, zinc run-off marks and light passivation stains are permissible.
Extra smooth (best surface, exposed)
Surface quality is obtained by skin passing. The controlled surface shall make it possible to apply a uniform high-class paint finish. The other surface shall at least have the characteristics of surface quality B. As a rule, the upper side of the strip is inspected; on request the strip can be turned over so that the underside is the inspected side.
MagiZinc® is currently only available with standard or improved surface qualities.
Surface roughness
Metallic coated steel will normally be supplied with a regular matte finish:
| Description | Roughness µinch CLA |
|---|---|
| regular matte | 30 - 61 |
Surface treatments
The surface treatments available are O, C and CO.
Oiling (O)
The material surface can be oiled with preservative oil. Other types of oil may be available to meet your requirement – please contact us.
Tata Steel offers the following range of oiling levels for all coating types:
Lightly oiled: 55 mg/ft2 per side
Regular oiled: 110 mg/ft2 per side
Other oiling levels are available on request. If no amount is indicated in your specification, a regular amount of oil will be applied.
Chromium-free passivation (C)
This surface treatment temporarily protects the zinc coated material against white rust during transportation and storage (not applicable to all qualities – please consult us).
Chromium-free passivation and oiled (CO)
Please request this combination of surface treatments if you require extra protection against white rust formation (not applicable to all qualities – please consult us).
Please contact us on the availability of other surface treatments.
EN_US-Engineering-Product-Metallic coated-Forming-CS TYPE-Properties TSE
Properties
Mechanical properties
Zinc coated steel for forming has the following typical (non mandatory) mechanical properties parallel to the rolling direction:
| ASTM A653: 2022 | Designation | CS type A | CS type B | CS type C |
|---|---|---|---|---|
| Yield strength | ksi | 25 - 55 | 30 - 55 | 25 - 60 |
| Elongation 2 inch | % | ≥ 20 | ≥ 20 | ≥ 15 |
| rm - value | - | - | - | |
| n - value | - | - | - |
Chemical composition
The heat analysis of the base metal confirms to the following maximum composition values (in weight percentage), unless otherwise shown.
| Designation | CS type A | CS type B | CS type C | |
|---|---|---|---|---|
| C | Max. | 0.1 | 0.02 - 0.15 | 0.08 |
| Mn | Max. | 0.6 | 0.6 | 0.6 |
| P | Max. | 0.03 | 0.03 | 0.1 |
| S | Max. | 0.035 | 0.035 | 0.035 |
| Al | Min. | - | - | - |
| V | Max. | 0.008 | 0.008 | 0.008 |
| Cb | Max. | 0.008 | 0.008 | 0.008 |
| Ti | Max. | 0.025 | 0.025 | 0.025 |
All values are in weight%.
EN_US-Engineering-Product-Metallic coated-Forming-CS TYPE-Dimensions TSE
Dimensions
Galvanized dimensional capability.
Dimensions in inches.
| Thickness | Max. width |
|---|---|
| From - up to | CS Type A |
| CS Type B | |
| CS Type C | |
| 0.014 - 0.016 | 54 |
| 0.016 - 0.020 | 60 |
| 0.020 - 0.024 | 62 |
| 0.024 - 0.026 | 70 |
| 0.026 - 0.028 | 73 |
| 0.028 - 0.030 | 74 |
| 0.030 - 0.031 | 78 |
| 0.031 - 0.080 | 79 |
| 0.080 - 0.100 | 61 |
| 0.100 - 0.138 | 60 |
| 0.138 - 0.157 | 53 |
The minimum width is 36 inch.
Please contact us about the availability of lower widths, specific coating weights and surface finishes, as well as the availability of other extra formable grades.
MagiZinc® dimensional capability.
Dimensions in inches.
| Thickness | Max. width |
|---|---|
| From - up to | CS Type A |
| CS Type B | |
| CS Type C | |
| 0.016 - 0.020 | 60 |
| 0.020 - 0.024 | 62 |
| 0.024 - 0.026 | 70 |
| 0.026 - 0.028 | 73 |
| 0.028 - 0.030 | 74 |
| 0.030 - 0.031 | 78 |
| 0.031 - 0.080 | 79 |
The minimum width is 36 inch.
Please contact us on the availability of lower widths and thicknesses in the range 0.079 - 0.098.
Please contact us for details on the availability of other coating types.
Tolerances on thickness
The tolerances comply with standard ASTM A924: 2022.
Tighter tolerances are available on request.
EN_US-Engineering-Product-Metallic coated-All grades Shape and dimensional tolerancesTSE
Shape and dimensional tolerances
Tolerances on thickness
The thickness tolerances comply with standard ASTM A924: 2013 – 1 inch minimum edge distance.
Thickness tolerances over, no tolerance under. Dimensions in inches:
| Specified thickness | Normal tolerances for a specified width of | |||
|---|---|---|---|---|
| From - up to | 0 - 32 | 32 - 40 | 40 - 60 | 60 - 75 |
| 0.000 - 0.023 | 0.003 | 0.003 | 0.003 | 0.003 |
| 0.023 - 0.043 | 0.004 | 0.004 | 0.004 | 0.004 |
| 0.043 - 0.061 | 0.005 | 0.005 | 0.005 | 0.005 |
| 0.061 - 0.075 | 0.006 | 0.006 | 0.006 | 0.006 |
| 0.075 - 0.101 | 0.01 | 0.012 | 0.012 | 0.014 |
| 0.101 - 0.187 | 0.012 | 0.012 | 0.014 | 0.014 |
Around cold-rolled welds an increase of 20 % at the most over the thickness tolerance is allowed over a length of 50 ft.
Thickness tolerance availability is shown below:
| Thickness tolerance | Availability |
|---|---|
| Full thickness tolerance | Available |
| Special thickness tolerance | Refer before ordering |
| 50% of full thickness tolerance | Refer before ordering |
Tolerances on width
The tolerances for width comply with standard ASTM A924: 2013.
Thickness tolerances over, no tolerance under. Dimensions in inches:
| Specified width | Tolerances for a specified width of | |
|---|---|---|
| From - up to | Mill edge | Cut edge |
| 30 - 48 | 0.71 | 0.187 |
| 48 - 60 | 0.71 | 0.25 |
| 60 - 75 | 0.71 | 0.312 |
MagiZinc® is not included in the standard. Tighter tolerances are available on request.
Dimensions and coil weights
| Description | Capabilities |
|---|---|
| Inside diameter | standard 24 inches, 20 inches on request |
| Outside diameter | maximum 98 inches and at the most |
| 10/7 x width | |
| Coil weight | maximum 66.000 lbs. |
| PIW: width ≤ 47 | 868 - 1232 PIW |
| PIW: 47 inch < width ≤ 67 inch | 868 - 1215 PIW |
| PIW: width > 67 inch | 616 PIW and 868 - 1215 PIW |
Coating layer
| Coating layer | Coating weight total both sides |
|---|---|
| oz/ft2 | |
| G30 | 0.3 |
| G35 1 | 0.35 |
| G40 | 0.4 |
| G60 | 0.6 |
| G75 1 | 0.75 |
| G90 | 0.9 |
| G115 | 1.15 |
1. not in ASTM A653: 2008.
Other coating weights are available. Please contact us to discuss your requirements.
EN_US-Engineering-Product-Metallic coated-Forming-FS type TSE
EN_US-Engineering-Product-Metallic coated-Forming-All Grades OverviewTSE
Applications:
- Automotive components
- Building components
- Domestic appliances
- Electrical goods
- Tubes and sections
Relationship with standards
| ASTM A653: 2008 | ISO standard 3575 | SAE | JIS G3302-98 | |
|---|---|---|---|---|
| Designation | Name | Designation | ||
| CS type A | Commercial, lock forming | 01, 02 | - | SGCC + SGCH |
| CS type B | Commercial, lock forming | 01, 02 | - | - |
| CS type C | Commercial, lock forming | 01, 02 | - | - |
| FS type A | Drawing | 3 | - | - |
| FS type B | Deep drawing | 4 | - | - |
| DDS type A | Deep drawing special killed | 5 | - | - |
| EDDS | Extra deep drawing stabilized | 6 | - | SGCD2 |
See dimensional tables for available coating types per grade.
EN_US-Engineering-Product-Metallic coated-All Grades Coatings Surface aspectsTSE
Surface Aspects
Surface quality
Surface quality complies with ASTM standards A653: 2008 and A924: 2009. The products can be delivered with the following coating/surface types:
Minimized spangle (standard surface)
Imperfections such as pimples, marks, scratches, pits, variations in surface appearance, dark spots, stripe marks and light passivation stains are permissible.
Stretch levelling breaks or run-off marks may appear. Coil breaks and stretcher strains may also appear.
Minimized spangle temper rolled (improved surface)
With this surface quality, small imperfections such as stretch levelling breaks, skin pass marks, slight scratches, indentations, surface structure, zinc run-off marks and light passivation stains are permissible.
Extra smooth (best surface, exposed)
Surface quality is obtained by skin passing. The controlled surface shall make it possible to apply a uniform high-class paint finish. The other surface shall at least have the characteristics of surface quality B. As a rule, the upper side of the strip is inspected; on request the strip can be turned over so that the underside is the inspected side.
MagiZinc® is currently only available with standard or improved surface qualities.
Surface roughness
Metallic coated steel will normally be supplied with a regular matte finish:
| Description | Roughness µinch CLA |
|---|---|
| regular matte | 30 - 61 |
Surface treatments
The surface treatments available are O, C and CO.
Oiling (O)
The material surface can be oiled with preservative oil. Other types of oil may be available to meet your requirement – please contact us.
Tata Steel offers the following range of oiling levels for all coating types:
Lightly oiled: 55 mg/ft2 per side
Regular oiled: 110 mg/ft2 per side
Other oiling levels are available on request. If no amount is indicated in your specification, a regular amount of oil will be applied.
Chromium-free passivation (C)
This surface treatment temporarily protects the zinc coated material against white rust during transportation and storage (not applicable to all qualities – please consult us).
Chromium-free passivation and oiled (CO)
Please request this combination of surface treatments if you require extra protection against white rust formation (not applicable to all qualities – please consult us).
Please contact us on the availability of other surface treatments.
EN_US-Engineering-Product-Metallic coated-Forming-FS TYPE-Properties TSE
Properties
Mechanical properties
Zinc coated steel for forming has the following typical (non mandatory) mechanical properties parallel to the rolling direction:
| ASTM A653: 2022 | Designation | FS type A and B |
|---|---|---|
| Yield strength | ksi | 25 - 45 |
| Elongation 2 inch | % | ≥ 26 |
| rm - value | 1.0 - 1.4 | |
| n - value | 0.17 - 0.21 |
Chemical composition
The heat analysis of the base metal confirms to the following maximum composition values (in weight percentage), unless otherwise shown.
| Designation | FS type A | FS type B | |
|---|---|---|---|
| C | Max. | 0.1 | 0.02 - 0.10 |
| Mn | Max. | 0.5 | 0.5 |
| P | Max. | 0.02 | 0.02 |
| S | Max. | 0.035 | 0.03 |
| Al | Min. | - | - |
| V | Max. | 0.008 | 0.008 |
| Cb | Max. | 0.008 | 0.008 |
| Ti | Max. | 0.025 | 0.025 |
All values are in weight%.
EN_US-Engineering-Product-Metallic coated-Forming-FS TYPE-Dimensions TSE
Dimensions
Galvanized dimensional capability.
Dimensions in inches.
| Thickness | Max. width |
|---|---|
| From - up to | FS Type A |
| FS Type B | |
| 0.014 - 0.016 | 38 |
| 0.016 - 0.018 | 60 |
| 0.018 - 0.020 | 60 |
| 0.020 - 0.024 | 62 |
| 0.024 - 0.026 | 69 |
| 0.026 - 0.028 | 73 |
| 0.028 - 0.030 | 74 |
| 0.030 - 0.031 | 78 |
| 0.031 - 0.035 | 79 |
| 0.035 - 0.040 | 79 |
| 0.040 - 0.055 | 79 |
| 0.055 - 0.060 | 79 |
| 0.060 - 0.065 | 79 |
| 0.065 - 0.070 | 78 |
| 0.070 - 0.080 | 77 |
| 0.080 - 0.090 | 67 |
| 0.090 - 0.095 | 64 |
| 0.095 - 0.100 | 61 |
| 0.100 - 0.110 | 60 |
| 0.110 - 0.115 | 60 |
The minimum width is 36 inch.
Please contact us about the availability of lower widths, specific coating weights and surface finishes, as well as the availability of other extra formable grades.
MagiZinc® dimensional capability.
Dimensions in inches.
| Thickness | Max. width |
|---|---|
| From - up to | FS Type A |
| FS TypeB | |
| 0.016 - 0.018 | 60 |
| 0.018 - 0.020 | 60 |
| 0.020 - 0.024 | 60 |
| 0.024 - 0.026 | 61 |
| 0.026 - 0.028 | 61 |
| 0.028 - 0.047 | 61 |
| 0.047 - 0.079 | 61 |
The minimum width is 36 inch.
Please contact us on the availability of lower widths and thicknesses in the range 0.079 - 0.098.
Please contact us for details on the availability of other coating types.
Tolerances on thickness
The tolerances comply with standard ASTM A924: 2022.
Tighter tolerances are available on request.
EN_US-Engineering-Product-Metallic coated-All grades Shape and dimensional tolerancesTSE
Shape and dimensional tolerances
Tolerances on thickness
The thickness tolerances comply with standard ASTM A924: 2013 – 1 inch minimum edge distance.
Thickness tolerances over, no tolerance under. Dimensions in inches:
| Specified thickness | Normal tolerances for a specified width of | |||
|---|---|---|---|---|
| From - up to | 0 - 32 | 32 - 40 | 40 - 60 | 60 - 75 |
| 0.000 - 0.023 | 0.003 | 0.003 | 0.003 | 0.003 |
| 0.023 - 0.043 | 0.004 | 0.004 | 0.004 | 0.004 |
| 0.043 - 0.061 | 0.005 | 0.005 | 0.005 | 0.005 |
| 0.061 - 0.075 | 0.006 | 0.006 | 0.006 | 0.006 |
| 0.075 - 0.101 | 0.01 | 0.012 | 0.012 | 0.014 |
| 0.101 - 0.187 | 0.012 | 0.012 | 0.014 | 0.014 |
Around cold-rolled welds an increase of 20 % at the most over the thickness tolerance is allowed over a length of 50 ft.
Thickness tolerance availability is shown below:
| Thickness tolerance | Availability |
|---|---|
| Full thickness tolerance | Available |
| Special thickness tolerance | Refer before ordering |
| 50% of full thickness tolerance | Refer before ordering |
Tolerances on width
The tolerances for width comply with standard ASTM A924: 2013.
Thickness tolerances over, no tolerance under. Dimensions in inches:
| Specified width | Tolerances for a specified width of | |
|---|---|---|
| From - up to | Mill edge | Cut edge |
| 30 - 48 | 0.71 | 0.187 |
| 48 - 60 | 0.71 | 0.25 |
| 60 - 75 | 0.71 | 0.312 |
MagiZinc® is not included in the standard. Tighter tolerances are available on request.
Dimensions and coil weights
| Description | Capabilities |
|---|---|
| Inside diameter | standard 24 inches, 20 inches on request |
| Outside diameter | maximum 98 inches and at the most |
| 10/7 x width | |
| Coil weight | maximum 66.000 lbs. |
| PIW: width ≤ 47 | 868 - 1232 PIW |
| PIW: 47 inch < width ≤ 67 inch | 868 - 1215 PIW |
| PIW: width > 67 inch | 616 PIW and 868 - 1215 PIW |
Coating layer
| Coating layer | Coating weight total both sides |
|---|---|
| oz/ft2 | |
| G30 | 0.3 |
| G35 1 | 0.35 |
| G40 | 0.4 |
| G60 | 0.6 |
| G75 1 | 0.75 |
| G90 | 0.9 |
| G115 | 1.15 |
1. not in ASTM A653: 2008.
Other coating weights are available. Please contact us to discuss your requirements.
EN_US-Engineering-Product-Metallic coated-Forming-DDS type TSE
EN_US-Engineering-Product-Metallic coated-Forming-All Grades OverviewTSE
Applications:
- Automotive components
- Building components
- Domestic appliances
- Electrical goods
- Tubes and sections
Relationship with standards
| ASTM A653: 2008 | ISO standard 3575 | SAE | JIS G3302-98 | |
|---|---|---|---|---|
| Designation | Name | Designation | ||
| CS type A | Commercial, lock forming | 01, 02 | - | SGCC + SGCH |
| CS type B | Commercial, lock forming | 01, 02 | - | - |
| CS type C | Commercial, lock forming | 01, 02 | - | - |
| FS type A | Drawing | 3 | - | - |
| FS type B | Deep drawing | 4 | - | - |
| DDS type A | Deep drawing special killed | 5 | - | - |
| EDDS | Extra deep drawing stabilized | 6 | - | SGCD2 |
See dimensional tables for available coating types per grade.
EN_US-Engineering-Product-Metallic coated-All Grades Coatings Surface aspectsTSE
Surface Aspects
Surface quality
Surface quality complies with ASTM standards A653: 2008 and A924: 2009. The products can be delivered with the following coating/surface types:
Minimized spangle (standard surface)
Imperfections such as pimples, marks, scratches, pits, variations in surface appearance, dark spots, stripe marks and light passivation stains are permissible.
Stretch levelling breaks or run-off marks may appear. Coil breaks and stretcher strains may also appear.
Minimized spangle temper rolled (improved surface)
With this surface quality, small imperfections such as stretch levelling breaks, skin pass marks, slight scratches, indentations, surface structure, zinc run-off marks and light passivation stains are permissible.
Extra smooth (best surface, exposed)
Surface quality is obtained by skin passing. The controlled surface shall make it possible to apply a uniform high-class paint finish. The other surface shall at least have the characteristics of surface quality B. As a rule, the upper side of the strip is inspected; on request the strip can be turned over so that the underside is the inspected side.
MagiZinc® is currently only available with standard or improved surface qualities.
Surface roughness
Metallic coated steel will normally be supplied with a regular matte finish:
| Description | Roughness µinch CLA |
|---|---|
| regular matte | 30 - 61 |
Surface treatments
The surface treatments available are O, C and CO.
Oiling (O)
The material surface can be oiled with preservative oil. Other types of oil may be available to meet your requirement – please contact us.
Tata Steel offers the following range of oiling levels for all coating types:
Lightly oiled: 55 mg/ft2 per side
Regular oiled: 110 mg/ft2 per side
Other oiling levels are available on request. If no amount is indicated in your specification, a regular amount of oil will be applied.
Chromium-free passivation (C)
This surface treatment temporarily protects the zinc coated material against white rust during transportation and storage (not applicable to all qualities – please consult us).
Chromium-free passivation and oiled (CO)
Please request this combination of surface treatments if you require extra protection against white rust formation (not applicable to all qualities – please consult us).
Please contact us on the availability of other surface treatments.
EN_US-Engineering-Product-Metallic coated-Forming-DDS TYPE-Properties TSE
Properties
Mechanical properties
Zinc coated steel for forming has the following typical (non mandatory) mechanical properties parallel to the rolling direction:
| ASTM A653: 2022 | Designation | DDS type A |
|---|---|---|
| Yield strength | ksi | 20 - 35 |
| Elongation 2 inch | % | ≥ 32 |
| rm - value | 1.4 - 1.8 | |
| n - value | 0.19 - 0.24 |
Chemical composition
The heat analysis of the base metal confirms to the following maximum composition values (in weight percentage), unless otherwise shown.
| Designation | DDS type A | |
|---|---|---|
| C | Max. | 0.06 |
| Mn | Max. | 0.5 |
| P | Max. | 0.02 |
| S | Max. | 0.025 |
| Al | Min. | 0.01 |
| V | Max. | 0.008 |
| Cb | Max. | 0.008 |
| Ti | Max. | 0.025 |
All values are in weight%.
EN_US-Engineering-Product-Metallic coated-Forming-DDS TYPE-Dimensions TSE
Dimensions
Galvanized dimensional capability.
Dimensions in inches.
| Thickness | Max. width |
|---|---|
| From - up to | DDS Type A |
| 0.014 - 0.016 | - |
| 0.016 - 0.018 | - |
| 0.018 - 0.020 | 60 |
| 0.020 - 0.024 | 62 |
| 0.024 - 0.026 | 69 |
| 0.026 - 0.028 | 74 |
| 0.028 - 0.030 | 79 |
| 0.030 - 0.031 | 79 |
| 0.031 - 0.035 | 79 |
| 0.035 - 0.040 | 79 |
| 0.040 - 0.055 | 79 |
| 0.055 - 0.060 | 79 |
| 0.060 - 0.065 | 75 |
| 0.065 - 0.070 | 66 |
| 0.070 - 0.080 | 61 |
| 0.080 - 0.090 | - |
| 0.090 - 0.095 | - |
| 0.095 - 0.100 | - |
| 0.100 - 0.110 | - |
| 0.110 - 0.115 | - |
The minimum width is 36 inch.
Please contact us about the availability of lower widths, specific coating weights and surface finishes, as well as the availability of other extra formable grades.
MagiZinc® dimensional capability.
Dimensions in inches.
| Thickness | Max. width |
|---|---|
| From - up to | DDS Type A |
| 0.016 - 0.018 | - |
| 0.018 - 0.020 | 60 |
| 0.020 - 0.024 | 60 |
| 0.024 - 0.026 | 61 |
| 0.026 - 0.028 | 61 |
| 0.028 - 0.047 | 61 |
| 0.047 - 0.079 | - |
The minimum width is 36 inch.
Please contact us on the availability of lower widths and thicknesses in the range 0.079 - 0.098.
Please contact us for details on the availability of other coating types.
Tolerances on thickness
The tolerances comply with standard ASTM A924: 2022.
Tighter tolerances are available on request.
EN_US-Engineering-Product-Metallic coated-All grades Shape and dimensional tolerancesTSE
Shape and dimensional tolerances
Tolerances on thickness
The thickness tolerances comply with standard ASTM A924: 2013 – 1 inch minimum edge distance.
Thickness tolerances over, no tolerance under. Dimensions in inches:
| Specified thickness | Normal tolerances for a specified width of | |||
|---|---|---|---|---|
| From - up to | 0 - 32 | 32 - 40 | 40 - 60 | 60 - 75 |
| 0.000 - 0.023 | 0.003 | 0.003 | 0.003 | 0.003 |
| 0.023 - 0.043 | 0.004 | 0.004 | 0.004 | 0.004 |
| 0.043 - 0.061 | 0.005 | 0.005 | 0.005 | 0.005 |
| 0.061 - 0.075 | 0.006 | 0.006 | 0.006 | 0.006 |
| 0.075 - 0.101 | 0.01 | 0.012 | 0.012 | 0.014 |
| 0.101 - 0.187 | 0.012 | 0.012 | 0.014 | 0.014 |
Around cold-rolled welds an increase of 20 % at the most over the thickness tolerance is allowed over a length of 50 ft.
Thickness tolerance availability is shown below:
| Thickness tolerance | Availability |
|---|---|
| Full thickness tolerance | Available |
| Special thickness tolerance | Refer before ordering |
| 50% of full thickness tolerance | Refer before ordering |
Tolerances on width
The tolerances for width comply with standard ASTM A924: 2013.
Thickness tolerances over, no tolerance under. Dimensions in inches:
| Specified width | Tolerances for a specified width of | |
|---|---|---|
| From - up to | Mill edge | Cut edge |
| 30 - 48 | 0.71 | 0.187 |
| 48 - 60 | 0.71 | 0.25 |
| 60 - 75 | 0.71 | 0.312 |
MagiZinc® is not included in the standard. Tighter tolerances are available on request.
Dimensions and coil weights
| Description | Capabilities |
|---|---|
| Inside diameter | standard 24 inches, 20 inches on request |
| Outside diameter | maximum 98 inches and at the most |
| 10/7 x width | |
| Coil weight | maximum 66.000 lbs. |
| PIW: width ≤ 47 | 868 - 1232 PIW |
| PIW: 47 inch < width ≤ 67 inch | 868 - 1215 PIW |
| PIW: width > 67 inch | 616 PIW and 868 - 1215 PIW |
Coating layer
| Coating layer | Coating weight total both sides |
|---|---|
| oz/ft2 | |
| G30 | 0.3 |
| G35 1 | 0.35 |
| G40 | 0.4 |
| G60 | 0.6 |
| G75 1 | 0.75 |
| G90 | 0.9 |
| G115 | 1.15 |
1. not in ASTM A653: 2008.
Other coating weights are available. Please contact us to discuss your requirements.
EN_US-Engineering-Product-Metallic coated-Forming-EDDS TSE
EN_US-Engineering-Product-Metallic coated-Forming-All Grades OverviewTSE
Applications:
- Automotive components
- Building components
- Domestic appliances
- Electrical goods
- Tubes and sections
Relationship with standards
| ASTM A653: 2008 | ISO standard 3575 | SAE | JIS G3302-98 | |
|---|---|---|---|---|
| Designation | Name | Designation | ||
| CS type A | Commercial, lock forming | 01, 02 | - | SGCC + SGCH |
| CS type B | Commercial, lock forming | 01, 02 | - | - |
| CS type C | Commercial, lock forming | 01, 02 | - | - |
| FS type A | Drawing | 3 | - | - |
| FS type B | Deep drawing | 4 | - | - |
| DDS type A | Deep drawing special killed | 5 | - | - |
| EDDS | Extra deep drawing stabilized | 6 | - | SGCD2 |
See dimensional tables for available coating types per grade.
EN_US-Engineering-Product-Metallic coated-All Grades Coatings Surface aspectsTSE
Surface Aspects
Surface quality
Surface quality complies with ASTM standards A653: 2008 and A924: 2009. The products can be delivered with the following coating/surface types:
Minimized spangle (standard surface)
Imperfections such as pimples, marks, scratches, pits, variations in surface appearance, dark spots, stripe marks and light passivation stains are permissible.
Stretch levelling breaks or run-off marks may appear. Coil breaks and stretcher strains may also appear.
Minimized spangle temper rolled (improved surface)
With this surface quality, small imperfections such as stretch levelling breaks, skin pass marks, slight scratches, indentations, surface structure, zinc run-off marks and light passivation stains are permissible.
Extra smooth (best surface, exposed)
Surface quality is obtained by skin passing. The controlled surface shall make it possible to apply a uniform high-class paint finish. The other surface shall at least have the characteristics of surface quality B. As a rule, the upper side of the strip is inspected; on request the strip can be turned over so that the underside is the inspected side.
MagiZinc® is currently only available with standard or improved surface qualities.
Surface roughness
Metallic coated steel will normally be supplied with a regular matte finish:
| Description | Roughness µinch CLA |
|---|---|
| regular matte | 30 - 61 |
Surface treatments
The surface treatments available are O, C and CO.
Oiling (O)
The material surface can be oiled with preservative oil. Other types of oil may be available to meet your requirement – please contact us.
Tata Steel offers the following range of oiling levels for all coating types:
Lightly oiled: 55 mg/ft2 per side
Regular oiled: 110 mg/ft2 per side
Other oiling levels are available on request. If no amount is indicated in your specification, a regular amount of oil will be applied.
Chromium-free passivation (C)
This surface treatment temporarily protects the zinc coated material against white rust during transportation and storage (not applicable to all qualities – please consult us).
Chromium-free passivation and oiled (CO)
Please request this combination of surface treatments if you require extra protection against white rust formation (not applicable to all qualities – please consult us).
Please contact us on the availability of other surface treatments.
EN_US-Engineering-Product-Metallic coated-Forming-EDDS TYPE-Properties TSE
Properties
Mechanical properties
Zinc coated steel for forming has the following typical (non mandatory) mechanical properties parallel to the rolling direction:
| ASTM A653: 2022 | Designation | EDDS |
|---|---|---|
| Yield strength | ksi | 15 - 25 |
| Elongation 2 inch | % | ≥ 40 |
| rm - value | 1.6 - 2.1 | |
| n - value | 0.22 - 0.27 |
Chemical composition
The heat analysis of the base metal confirms to the following maximum composition values (in weight percentage), unless otherwise shown.
| Designation | EDDS | |
|---|---|---|
| C | Max. | 0.02 |
| Mn | Max. | 0.4 |
| P | Max. | 0.02 |
| S | Max. | 0.02 |
| Al | Min. | 0.01 |
| V | Max. | 0.1 |
| Cb | Max. | 0.1 |
| Ti | Max. | 0.15 |
All values are in weight%.
EDDS shall be furnished as a stabilized steel.
EN_US-Engineering-Product-Metallic coated-Forming-EDDS Type-Dimensions TSE
Dimensions
Galvanized dimensional capability.
Dimensions in inches.
| Thickness | Max. width |
|---|---|
| From - up to | EDDS |
| 0.014 - 0.016 | - |
| 0.016 - 0.018 | - |
| 0.018 - 0.020 | 60 |
| 0.020 - 0.024 | 60 |
| 0.024 - 0.026 | 63 |
| 0.026 - 0.028 | 70 |
| 0.028 - 0.030 | 74 |
| 0.030 - 0.031 | 80 |
| 0.031 - 0.035 | 80 |
| 0.035 - 0.040 | 80 |
| 0.040 - 0.055 | 80 |
| 0.055 - 0.060 | 80 |
| 0.060 - 0.065 | 80 |
| 0.065 - 0.070 | 80 |
| 0.070 - 0.080 | 80 |
| 0.080 - 0.090 | 80 |
| 0.090 - 0.095 | 76 |
| 0.095 - 0.100 | 61 |
| 0.100 - 0.110 | - |
| 0.110 - 0.115 | - |
The minimum width is 36 inch.
Please contact us about the availability of lower widths, specific coating weights and surface finishes, as well as the availability of other extra formable grades.
MagiZinc® dimensional capability.
Dimensions in inches.
| Thickness | Max. width |
|---|---|
| From - up to | EDDS |
| 0.016 - 0.018 | - |
| 0.018 - 0.020 | - |
| 0.020 - 0.024 | 80 |
| 0.024 - 0.026 | 76 |
| 0.026 - 0.028 | 61 |
| 0.028 - 0.047 | - |
| 0.047 - 0.079 | - |
The minimum width is 36 inch.
Please contact us on the availability of lower widths and thicknesses in the range 0.079 - 0.098.
Please contact us for details on the availability of other coating types.
Tolerances on thickness
The tolerances comply with standard ASTM A924: 2022.
Tighter tolerances are available on request.
EN_US-Engineering-Product-Metallic coated-All grades Shape and dimensional tolerancesTSE
Shape and dimensional tolerances
Tolerances on thickness
The thickness tolerances comply with standard ASTM A924: 2013 – 1 inch minimum edge distance.
Thickness tolerances over, no tolerance under. Dimensions in inches:
| Specified thickness | Normal tolerances for a specified width of | |||
|---|---|---|---|---|
| From - up to | 0 - 32 | 32 - 40 | 40 - 60 | 60 - 75 |
| 0.000 - 0.023 | 0.003 | 0.003 | 0.003 | 0.003 |
| 0.023 - 0.043 | 0.004 | 0.004 | 0.004 | 0.004 |
| 0.043 - 0.061 | 0.005 | 0.005 | 0.005 | 0.005 |
| 0.061 - 0.075 | 0.006 | 0.006 | 0.006 | 0.006 |
| 0.075 - 0.101 | 0.01 | 0.012 | 0.012 | 0.014 |
| 0.101 - 0.187 | 0.012 | 0.012 | 0.014 | 0.014 |
Around cold-rolled welds an increase of 20 % at the most over the thickness tolerance is allowed over a length of 50 ft.
Thickness tolerance availability is shown below:
| Thickness tolerance | Availability |
|---|---|
| Full thickness tolerance | Available |
| Special thickness tolerance | Refer before ordering |
| 50% of full thickness tolerance | Refer before ordering |
Tolerances on width
The tolerances for width comply with standard ASTM A924: 2013.
Thickness tolerances over, no tolerance under. Dimensions in inches:
| Specified width | Tolerances for a specified width of | |
|---|---|---|
| From - up to | Mill edge | Cut edge |
| 30 - 48 | 0.71 | 0.187 |
| 48 - 60 | 0.71 | 0.25 |
| 60 - 75 | 0.71 | 0.312 |
MagiZinc® is not included in the standard. Tighter tolerances are available on request.
Dimensions and coil weights
| Description | Capabilities |
|---|---|
| Inside diameter | standard 24 inches, 20 inches on request |
| Outside diameter | maximum 98 inches and at the most |
| 10/7 x width | |
| Coil weight | maximum 66.000 lbs. |
| PIW: width ≤ 47 | 868 - 1232 PIW |
| PIW: 47 inch < width ≤ 67 inch | 868 - 1215 PIW |
| PIW: width > 67 inch | 616 PIW and 868 - 1215 PIW |
Coating layer
| Coating layer | Coating weight total both sides |
|---|---|
| oz/ft2 | |
| G30 | 0.3 |
| G35 1 | 0.35 |
| G40 | 0.4 |
| G60 | 0.6 |
| G75 1 | 0.75 |
| G90 | 0.9 |
| G115 | 1.15 |
1. not in ASTM A653: 2008.
Other coating weights are available. Please contact us to discuss your requirements.
EN_US-Automotive-Product-Metallic Coated-HSS TSE
High-strength steel
Our range of metallic coated high-strength steels includes micro-alloyed, phosphorus-alloyed and bake-hardening grades.
EN_US-Automotive-Product-Metallic Coated-AHSS UHSS TSE
AHSS/UHSS
We offer dual-phase and complex-phase steels. Dual-phase steels combine high yield strength with good ductility – ensuring excellent fatigue properties and energy absorption.
EN_US-Automotive-Contact-General sales - Automotive - general
Automotive sales enquiries and customer services
Please contact us for further information, questions and enquiries. Working together on sustainable vehicles and value chains.