Ymvit
Tata Steel’s Ymvit® cold-rolled steel for enamelling delivers end product and process benefits including superb coating adhesion and reliable deep drawing. Ymvit Ultra grades provide perfect coating adhesion and improved resistance to carbon boiling and fish scaling.
Applications include bakeware, barbecues, bathroom furniture, heat-exchange panels, photovoltaic solar panels, domestic appliances, sinks white boards and wall panels.
EN-Engineering-Product-Cold-rolled-Ymvit enamelling-Ymvit 01 (DC01EK) TSN
EN-Engineering-Product-Cold-rolled-Ymvit enameling-All Grades OverviewTSN
Relationship with standards
Steel for enamelling complies with the following standards:
|
Tata Steel |
European standard |
USA |
|---|---|---|
|
Ymvit Grade |
EN 10209 |
ASTM A424 |
|
Ground Coat Enamelling (if necessary followed by cover coat) |
||
|
Ymvit 01 |
DC01EK |
- |
|
Ymvit 04 |
DC04EK |
- |
|
Ymvit 04 plus |
DC04EK (bath tubs) |
- |
|
Two Coat/One Fire and Pore Free Enamelling |
||
|
Ymvit Ultra 03 |
DC03ED |
type I CS |
|
Ymvit Ultra 04 |
DC04ED |
type I DS |
|
Ymvit Extra 06 |
DC06ED |
type III IF |
|
Direct White Enamelling |
||
|
Ymvit Ultra 03 |
DC03ED |
type I CS |
|
Ymvit Ultra 04 |
DC04ED |
type I DS |
|
Ymvit Extra 06 |
DC06ED |
type III IF |
EN-EngineeringAutomotive-Product-Cold-rolled-All Grades Surface aspectsTSE
Surface quality
Surface quality A
Defects that do not influence the formability or the application of surface coatings are permitted. They are defects such as pores, minor scratches, slight indentations, small grooves or slight discolouration.
Surface quality B
The better side must be free of defects that can spoil the uniform appearance of a high-quality paint or of an electrolytic coating. The other side must at least conform to surface quality A. Not all combinations of thickness and width are available in surface quality B. Please contact us for details.
Inspected side
As a rule, the upper side of the strip is inspected; on request, the strip can be wound so that the inspected side is the underside.
Surface texture/roughness
Cold-rolled annealed and skin-passed steel is available in several surface textures. Unless specified otherwise, Tata Steel will supply normal roughness. The table below shows the range of surface textures according to EN 10130:2006.
|
|
Roughness Ra (µm) |
|
|---|---|---|
|
EN 10130: 2006 |
Symbol |
cut off 0.8 mm |
|
extra-bright 1 |
- |
≤ 0.3 |
|
bright |
b |
≤ 0.4 |
|
semi-bright |
g |
≤ 0.9 |
|
normal |
m |
0.6 - 1.9 |
|
rough |
r |
> 1.6 |
|
extra-rough 2 |
- |
3.5 - 5 |
1. Not in EN 10130:2006 - Tata Steel’s own specification. Please contact us regarding the availability
2. Not in EN 10130:2006 - Tata Steel’s own specification, measured with a cut off of 2.5 mm
Other surface textures are available to meet your requirements - please contact us for details.
Preservative oil
The standard oil applied by Tata Steel acts as a protective coating. Other types of oil may be available to meet your requirement.
Tata Steel offers a range of oiling levels from 0.25 - 1.7 g/m2 per side.
Other oiling levels are available on request. Tata Steel is not responsible for the risk of corrosion during storage or shipment if material is ordered in the un-oiled condition.
Surface cleanliness
Tata Steel can guarantee improved surface cleanliness on request for batch-annealed products. The cleanliness is tested with a tap