Other tubular products available for trucks and trailers
HFI welded precision tubes are used to manufacture propeller shafts for Automotive applications mostly for truck and busses.
Tata Steel feedstock consist of a favourable Si/Mn ratio to increase fatigue life of the propeller shaft.
Typical dimensions are (OD x WT):
- ø 89 x 4
- ø 100 x 4.75
- ø 100 x 5.5
- ø 108 x 5.5
- ø 114.3 x 5.5
HFI (High Frequency Induction) welded precision tubes are used to manufacture propeller shafts for automotive applications for truck, busses and other transportation vehicles. Using the Tata Steel R&D facilities and in collaboration with the truck market, Tata Steel'sTubes was able to demonstrate the optimal chemistry to maximise fatigue performance. Please contact for specific range of grades and dimensions available.
Our material experts are there available to support the deployment of our products in your specific application area. For more information contact our transportation tube experts.
READ MORE: HFI-welded tubes versus cold drawn tubes for automotive applications (Article from SCT 2017).
for lateral frame support.
Ø 90 x 3/4/5/6
Controls driveline angles of the vehicle, in combination with torque rod.
Ø 52.5 x 4.75
Controls driveline angles of the vehicle, in combination with v-stay.
Specialised treatment (normalised: PJV) to increase fatigue life to avoid accident.
Ø 52 x 3/Ø 52 x 4/Ø 60 x 4
Protected and give structure to passenger compartment.
Connects ARB in a flexible way to the frame.
Part of a steering assembly connecting two parts to pivot.