• Recognised for its robustness and reliability.

<ul> <li>Our principal ‘gaslist’ tube for UK market applications. </li> <li>Manufactured in accordance with a range of standards, including EN10255 and EN10217-2 to satisfy both Construction Products Regulation (CPR) and the Pressure Equipment Directive (PED) requirements, where applicable.</li> <li>The perfect replacement for BS1387, which is now a withdrawn and unsupported standard.</li> <li>Install Plus uses a higher 235MPa grade of steel (compared to lower 195 grade as per BS1387) delivering improved pressure integrity.</li> <li>CE marked to CPR CAT 3 (gas/fuel) and CPR CAT 4 (water) for added confidence and application suitability.</li> <li>Suitable for pressure applications and temperature range -20 to +300ºC.</li> <li>Available in a wide range of sizes and weights.</li> <li>We are able to offer exact lengths for bulk orders.</li> <li>Available in a range of ends (plain, grooved or screwed and socketed) and surface finishes (red-painted or galvanised).</li> <li>Other special surface colours and finishes, including external epoxy and polymer coatings may also be available, please contact us to discuss your requirements. <span>(Note: certain size restrictions or minimum order quantities may apply)</span></li> <li>Our pre-grooved tube offers project savings as well as other installation benefits.</li> <li>Install Plus is fully technically supported with a wide range of available product datasheets.</li> </ul>

Summary of chemical composition (ladle analysis) and mechanical properties

Install® Plus tube data

For larger Install® Plus XL EN10255 sizes, please refer to our Inline® product literature for full details.

<p><img alt="" height="345" src="/ts/sites/default/files/Tata%20Steel/content/products/Pipework%20Systems/Install%20and%20Install%20Plus/Images/Pressure%20ratings.jpg" width="1000"/></p>

Downloads

• Robust and reliable building and engineering services solution

<ul> <li>Our principal ‘gaslist’ tube for Mainland European (MLE) market applications.</li> <li>Single certified product, manufactured in accordance to EN10255.</li> <li>CE marked to CPD CAT 3 (gas/fuel) and CPD CAT 4 (water) for added confidence and application suitability.</li> <li>195 steel grade.</li> <li>Manufactured in the UK.</li> <li>Hot-finished process route, delivering consistent performance, mechanical properties and improved ductility, compared to competitor cold-formed options that may suffer from internal stresses and increased risk of failure during manipulation.</li> <li>Suitable for pressure applications and temperature range -7 to +260ºC.</li> <li>Available in a wide range of sizes, weights and wall thickness.</li> <li>Available in a range of end (plain, grooved or screwed and socketed) and surface finishes (painted, polymer, epoxy or galvanised). (Note: c<span>ertain size restrictions or minimum order quantities may apply.)</span></li> <li>Backed up by technical experts who can offer advice on applications and product suitability.</li> <li>Install® is fully technically supported with a range of available product brochures.</li> <li>Certified to BES 6001 Responsible Sourcing standard.</li> </ul>

Chemical composition (cast analysis) and mechanical properties

Install® EN 10255 dimensional data

<p><img alt="" height="431" src="/ts/sites/default/files/Tata%20Steel/content/products/Pipework%20Systems/Install%20and%20Install%20Plus/Install/Images/Pressure%20ratings.jpg" width="1000"/></p>

<p></p>