Hot-rolled

Valast®

Efficient and reliable abrasion resistant steel sheet withstands harsh wear and tear whilst maintaining lasting quality – even in the most demanding environments. 

Tata Steel's Valast wear plate is available in extra-wide strip dimensions, offers consistent flatness and world‑class surface quality. Valast 400/450 is brought to you through a robust local supply chain offering reduced lead times and customised sheet lengths.

Designed specifically for use in tough conditions. You can rely on Valast wear steel to keep performing. The widest AR sheet available has got a superior surface finish, ideal for the production of stand out equipment.

Dump truck at quarry
Two steel workers having a discussion near to distribution trucks
Two workers having a conversation near a truck, one in the doorway of the truck, the other standing outside
Abrasion resistant steel in road sweeper truck application
Valast abrasion resistant steel
Red ridged coil
Product specification
Valast is currently available in the following grade:

EN-Engineering-Product-Hot-Rolled-Valast Abrasion Resistant-Valast400 TSN

Valast 400

Specification details for Valast® 400/450

EN-Engineering-Product-Hot-Rolled-AbrasionResistant-Valast-OverviewTSN

Overview

Based on decades of steel know-how and extensive application knowledge, we have developed Valast abrasion resistant steel. Designed specifically for use in construction, mining and agriculture equipment. You can rely on Valast wear plate to keep performing in the toughest conditions. 

Steel hardness is vital to the development of high performance, abrasion resistant steel. Typically used in tipper bodies, dump trucks, asphalt pavers, cement trucks, chutes, garbage trucks, containers, excavator buckets and many more applications, this steel must withstand severe wear and tear to extend their operational life and minimise repair and replacement costs.

Reliable quality, together with the widest abrasion resistant strip dimensions on the market, result in multiple benefits for your processing operations – with scope to boost yield and cut waste. Thoroughly tested, fully accredited and available only via a proven supply chain, Valast gives you extra value.
 

Product features

Valast® 450 offers unique and distinguishing product features that benefit our customers significantly. These have been highlighted in the below icons. 

Valast abrasion resistant steel. Product features

Guaranteed impact toughness

Valast offers a guaranteed impact toughness of ≥ 34 J/cm2 at -40 degrees Celsius, making sure the product performs in even the coldest environments.

Custom sizes

Valast steel sheets come from hot-rolled steel coils that can be cut to any length at our own downstream facilities as well as at some carefully selected supply chain partners. Combining the flexible sheet lengths with the widest AR steel coil offering on the market allows customers to order the custom sizes that they need. This significantly reduces yield loss and helps customers to optimally nest for laser and cutting operations.

Weldability

Tata Steel's investment in a research and development programme has ensured a low CET of less than 0.33 in Valast 450 steel - ensuring that all conventional welding methods can be used.

CEV max
CET max PCM max
0.45 0.33 0.32

Consistent tight tolerances

Valast strip steel is made on the IJmuiden (the Netherlands) world-class hot strip mill. The thickness and width tolerances are world-class, enabling effortless automated processing of our material.

Customer Technical Services

Valast wear steel comes with the backing of excellent customer technical service engineers, helping with any product questions you might have. We can also offer our Advanced Engineering Services through which customers get design support to make sure one gets the best possible performance from our materials.

High quality surface finish

Tata Steel Europe’s Valast 450 has a superior surface quality compared to other offerings in the market place. The steel is tough but still offers those premium aesthetics that world-class equipment providers want to offer.

Certification

A 3.1 certificate is issued with Valast 450. Other certificate types are available on request. 

Product support

Our proactive customer technical services team offers technical consultancy and practical, hands-on support to help you to get the best from Valast 450. Using our steel know-how and application knowledge, we can assist you in maximising processing efficiency and end product performance.

EN-Engineering-Product-Hot-Rolled-AbrasionResistant-Valast 400-PropertiesTSN

Properties

Mechanical properties

5 ≤ thickness ≤ 12 mm
Valast 400  Valast 400 
(Typical value) (Guaranteed)
Hardness 1 HBW 400 370 - 430
Yield strength 2 Rp0.2 (N/mm2) 1100  
Tensile strength 2 Rm (N/mm2) 1300  
Elongation 2 L0 = 5.65 √S0 (%) 10  
Bending radius 3     3.5t
1. Brinell hardness (HBW) according to EN ISO 6506-1, on a milled surface 0.3 – 1 mm below surface. At least one test specimen per heat and 40 tons
2. Mechanical properties are tested in longitudinal direction, based on thicknesses between 4mm and 8mm.
    For other thicknesses please contact us.
3. Minimal radius at bending over 90° - bend line parallel to the rolling direction.


Impact strength

Direction
Temperature Guaranteed Typical
Longitudinal -40°C ≥ 34 J/cm2 90 J/cm2
  -20°C   120 J/cm2
Transverse -40°C   50 J/cm2
  -20°C ≥ 50 J/cm2 75 J/cm2
* Guaranteed values correspond to 27J/40J for a full size 10 x 10 mm test piece


Chemical composition

Valast meets the requirements of the cast analysis in the standard as shown in the table below:

Grade
Valast 400
C ≤ 0.190
Mn ≤ 1.100
P ≤ 0.020
S ≤ 0.005
Si ≤ 0.100
Alsol ≥ 0.015
Nb ≤ 0.060
V ≤ 0.100
Ti ≤ 0.060
Mo ≤ 0.250
B ≤ 0.005
All values are in weight%.

EN-Engineering-Product-Hot-Rolled-AbrasionResistant-Valast 400-DimensionsTSN

Dimensions

Dimensional capability – non-pickled

Dimensions in mm.

Thickness
Max. width 
From - up to Valast 400
2.00 - 5.001 1100
5.00 - 6.00 19002
6.00 - 8.00 19502
8.00 - 11.00 2000
11.00 - 12.00 15002
1. Thicknesses below 5 mm and above 8 mm are under development. Please contact us for availability.
2. Larger widths are under development. Please contact us for availability.
The minimum width is 1000 mm.
 

Tolerances

Thickness

Complies with ½ EN 10051.

Length, width, shape and flatness

Complies with EN 10051. Tighter tolerances available on request.

 

EN-EngineeringAutomotive-Product-Hot-rolled-All grades Shape and dimensional tolerances TSE

Shape and dimensional tolerances

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

 

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product type Thickness tolerances available
  (% of full EN 10051:2010 tolerance)
  100% 75% 66% 60% 50% 33%

Steel for forming

Yes

Yes

Yes

Yes

Yes

Yes 1

High-strength low-alloy
(HSLA EN 10149-2)

Yes

Yes

Yes

Yes

Yes

Yes 1

Ympress® HSLA

 

 

 

 

Yes

Yes 1

Ympress® Laser

 

 

 

 

Yes

Yes 1

Structural steel

Yes

Yes

Yes

Yes

Yes

Yes 1

Boron manganese steel Yes Yes Yes Yes Yes  

Case-hardening steel

Yes

Yes

Yes

Yes

Yes

 

High-carbon steel

Yes

 

 

 

 

 

Dual phase steel

Yes

 

 

 

 

 

Hot forming steel

Yes

 

 

 

 

 

Valast® abrasion resistant steel

Yes

Yes

Yes

Yes

Yes

 

Steel for pressure vessels

Yes

 

 

 

 

 

Steel for gas cylinders

Yes

 

 

 

 

 

Steel for line pipe

Yes

 

 

 

 

 

Ship plate

Yes

 

 

 

 

 

1. Available for certain grades and thicknesses between 3.0mm and 6.0mm.
Please contact us on the availability of special tolerances to meet your requirements.
 
Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)
Nominal thickness Tolerances for a nominal width of
≤ 1200 > 1200 > 1500 > 1800
≤ 1500 ≤ 1800

 

≤ 2.00

± 0.13

± 0.14

± 0.16

-

> 2.00

≤ 2.50

± 0.14

± 0.16

± 0.17

± 0.19

> 2.50

≤ 3.00

± 0.15

± 0.17

± 0.18

± 0.20

> 3.00

≤ 4.00

± 0.17

± 0.18

± 0.20

± 0.20

> 4.00

≤ 5.00

± 0.18

± 0.20

± 0.21

± 0.22

> 5.00

≤ 6.00

± 0.20

± 0.21

± 0.22

± 0.23

> 6.00

≤ 8.00

± 0.22

± 0.23

± 0.23

± 0.26

> 8.00

≤ 11.00

± 0.24

± 0.25

± 0.25

± 0.28

All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
Re ≤ 300 N/mm2 (category A)
Nominal thickness Tolerances for a nominal width of
≤ 1200 > 1200 > 1500 > 1800
≤ 1500 ≤ 1800
 

≤ 2.00

± 0.17

± 0.19

± 0.21

-

> 2.00

≤ 2.50

± 0.18

± 0.21

± 0.23

± 0.25

> 2.50

≤ 3.00

± 0.20

± 0.22

± 0.24

± 0.26

> 3.00

≤ 4.00

± 0.22

± 0.24

± 0.26

± 0.27

> 4.00

≤ 5.00

± 0.24

± 0.26

± 0.28

± 0.29

> 5.00

≤ 6.00

± 0.26

± 0.28

± 0.29

± 0.31

> 6.00

≤ 8.00

± 0.29

± 0.30

± 0.31

± 0.35

> 8.00

≤ 10.00

± 0.32

± 0.33

± 0.34

± 0.40

> 10.00

≤ 12.50

± 0.35

± 0.36

± 0.37

± 0.43

> 12.50

≤ 15.00

± 0.37

± 0.38

± 0.40

± 0.46

> 15.00

≤ 25.00

± 0.40

± 0.42

± 0.45

± 0.50

All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm2 < Re ≤ 360 N/mm2 (category B)
Nominal thickness Tolerances for a nominal width of
≤ 1200 > 1200 > 1500 > 1800
≤ 1500 ≤ 1800

 

≤ 2.00

± 0.20

± 0.22

± 0.24

-

> 2.00

≤ 2.50

± 0.21

± 0.24

± 0.26

± 0.29

> 2.50

≤ 3.00

± 0.23

± 0.25

± 0.28

± 0.30

> 3.00

≤ 4.00

± 0.25

± 0.28

± 0.30

± 0.31

> 4.00

≤ 5.00

± 0.28

± 0.30

± 0.32

± 0.33

> 5.00

≤ 6.00

± 0.30

± 0.32

± 0.33

± 0.36

> 6.00

≤ 8.00

± 0.33

± 0.35

± 0.36

± 0.40

> 8.00

≤ 10.00

± 0.37

± 0.38

± 0.39

± 0.46

> 10.00

≤ 12.50

± 0.40

± 0.41

± 0.43

± 0.49

> 12.50

≤ 15.00

± 0.43

± 0.44

± 0.46

± 0.53

> 15.00

≤ 25.00

± 0.46

± 0.48

± 0.52

± 0.58

All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm2 < Re ≤ 420 N/mm2 (category C)
Nominal thickness

Tolerances for a nominal width of

≤ 1200 > 1200 > 1500 > 1800
≤ 1500 ≤ 1800

 

≤ 2.00

± 0.22

± 0.25

± 0.27

-

> 2.00

≤ 2.50

± 0.23

± 0.27

± 0.30

± 0.33

> 2.50

≤ 3.00

± 0.26

± 0.29

± 0.31

± 0.34

> 3.00

≤ 4.00

± 0.29

± 0.31

± 0.34

± 0.35

> 4.00

≤ 5.00

± 0.31

± 0.34

± 0.36

± 0.38

> 5.00

≤ 6.00

± 0.34

± 0.36

± 0.38

± 0.40

> 6.00

≤ 8.00

± 0.38

± 0.39

± 0.40

± 0.46

> 8.00

≤ 10.00

± 0.42

± 0.43

± 0.44

± 0.52

> 10.00

≤ 12.50

± 0.46

± 0.47

± 0.48

± 0.56

> 12.50

≤ 15.00

± 0.48

± 0.49

± 0.52

± 0.60

> 15.00

≤ 25.00

± 0.52

± 0.55

± 0.59

± 0.65

All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm2 < Re ≤ 900 N/mm2 (category D)

Nominal thickness

Tolerances for a nominal width of
≤ 1200 > 1200 > 1500 > 1800
≤ 1500 ≤ 1800

 

≤ 2.00

± 0.24

± 0.27

± 0.29

-

> 2.00

≤ 2.50

± 0.25

± 0.29

± 0.32

± 0.35

> 2.50

≤ 3.00

± 0.28

± 0.31

± 0.34

± 0.36

> 3.00

≤ 4.00

± 0.31

± 0.34

± 0.36

± 0.38

> 4.00

≤ 5.00

± 0.34

± 0.36

± 0.39

± 0.41

> 5.00

≤ 6.00

± 0.36

± 0.39

± 0.41

± 0.43

> 6.00

≤ 8.00

± 0.41

± 0.42

± 0.43

± 0.49

> 8.00

≤ 10.00

± 0.45

± 0.46

± 0.48

± 0.56

> 10.00

≤ 12.50

± 0.49

± 0.50

± 0.52

± 0.60

> 12.50

≤ 15.00

± 0.52

± 0.53

± 0.56

± 0.64

> 15.00

≤ 25.00

± 0.56

± 0.59

± 0.63

± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
Mill edges Trimmed edges
lower upper lower upper

 w ≤ 1200

0

20

0

3

 1200 < w ≤ 1850

0

20

0

5

 w > 1850

0

25

0

6

Tolerances  in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000mm:

• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.

 

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Category 1

C40

     
Nominal Thickness

≤ 1200

> 1200

> 1500

> 1800

≤ 1500

≤ 1800

> 1.47

≤ 2.00

40

40

40

40

> 2.00

≤ 2.50

40

40

50

50

> 2.50

≤ 3.00

40

40

50

50

> 3.00

≤ 6.00

40

50

50

50

> 6.00

≤ 11.00

50

50

50

50

 

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2

C40

     
Nominal Thickness

≤ 1200

> 1200

> 1500

> 1800

≤ 1500

≤ 1800

> 1.47

≤ 2.00

40

40

40

40

> 2.00

≤ 2.50

40

40

50

50

> 2.50

≤ 20.00

50

50

50

50

 

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
 and HSLA grades (S315MC in EN 10149-2:1996)

Category 3

C40

     
Nominal Thickness

≤ 1200

> 1200

> 1500

> 1800

≤ 1500

≤ 1800

> 1.47

≤ 2.00

50

50

60

60

> 2.00

≤ 2.50

50

60

60

60

> 2.50

≤ 3.00

50

60

60

60

> 3.00

≤ 20.00

60

60

70

70

 

Maximum Crown C40 in µm values of HSLA grades
 (S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4

C40

     
Nominal Thickness

≤ 1200

> 1200

> 1500

> 1800

≤ 1500

≤ 1800

> 1.47

≤ 2.00

60

70

70

70

> 2.00

≤ 2.50

60

70

80

80

> 2.50

≤ 3.00

60

70

80

80

> 3.00

≤ 5.00

70

70

80

80

> 5.00

≤ 20.00

80

80

80

80

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description

Availability

Coil diameter inner non-pickled

762mm

Coil diameter inner pickled

610mm standard

762mm on request

Tolerance on inner diameter

+0/-50mm

Coil diameter outer non-pickled

Outer diameter available is 10/7 x width

to reduce possibility of coil tipping over

Max. 2200mm

Min. 1050mm

Coil diameter outer pickled and oiled

Outer diameter available is 10/7 x width

to reduce possibility of coil tipping over

Outer diameter

limit 2200mm

Min. 1050mm

Coil weight

Max. 34 tonnes

Additional maximum limits from transport

limits and outer coil diameter

Some HR products may have different

coil weight ranges

KIM: width ≤ 1200mm

15.5 - 23.0 kg/mm width

KIM: 1200 < width ≤ 1700mm

12.1 - 21.7 kg/mm width

KIM: width > 1700mm

11.0 kg/mm width and 12.1 - 21.7 kg/mm width

Minimum tonnage per order

Please refer to price list for order quantity details

Minimum order quantities may apply

 

 

 

 

EN-Engineering-Product-Hot-Rolled-AbrasionResistant-Valast-DownloadTSN

Download

Download:

EN-Engineering-Product-Hot-Rolled-Valast Abrasion Resistant-Valast450 TSN

Valast 450

Specification details for Valast® 400/450

EN-Engineering-Product-Hot-Rolled-AbrasionResistant-Valast-OverviewTSN

Overview

Based on decades of steel know-how and extensive application knowledge, we have developed Valast abrasion resistant steel. Designed specifically for use in construction, mining and agriculture equipment. You can rely on Valast wear plate to keep performing in the toughest conditions. 

Steel hardness is vital to the development of high performance, abrasion resistant steel. Typically used in tipper bodies, dump trucks, asphalt pavers, cement trucks, chutes, garbage trucks, containers, excavator buckets and many more applications, this steel must withstand severe wear and tear to extend their operational life and minimise repair and replacement costs.

Reliable quality, together with the widest abrasion resistant strip dimensions on the market, result in multiple benefits for your processing operations – with scope to boost yield and cut waste. Thoroughly tested, fully accredited and available only via a proven supply chain, Valast gives you extra value.
 

Product features

Valast® 450 offers unique and distinguishing product features that benefit our customers significantly. These have been highlighted in the below icons. 

Valast abrasion resistant steel. Product features

Guaranteed impact toughness

Valast offers a guaranteed impact toughness of ≥ 34 J/cm2 at -40 degrees Celsius, making sure the product performs in even the coldest environments.

Custom sizes

Valast steel sheets come from hot-rolled steel coils that can be cut to any length at our own downstream facilities as well as at some carefully selected supply chain partners. Combining the flexible sheet lengths with the widest AR steel coil offering on the market allows customers to order the custom sizes that they need. This significantly reduces yield loss and helps customers to optimally nest for laser and cutting operations.

Weldability

Tata Steel's investment in a research and development programme has ensured a low CET of less than 0.33 in Valast 450 steel - ensuring that all conventional welding methods can be used.

CEV max
CET max PCM max
0.45 0.33 0.32

Consistent tight tolerances

Valast strip steel is made on the IJmuiden (the Netherlands) world-class hot strip mill. The thickness and width tolerances are world-class, enabling effortless automated processing of our material.

Customer Technical Services

Valast wear steel comes with the backing of excellent customer technical service engineers, helping with any product questions you might have. We can also offer our Advanced Engineering Services through which customers get design support to make sure one gets the best possible performance from our materials.

High quality surface finish

Tata Steel Europe’s Valast 450 has a superior surface quality compared to other offerings in the market place. The steel is tough but still offers those premium aesthetics that world-class equipment providers want to offer.

Certification

A 3.1 certificate is issued with Valast 450. Other certificate types are available on request. 

Product support

Our proactive customer technical services team offers technical consultancy and practical, hands-on support to help you to get the best from Valast 450. Using our steel know-how and application knowledge, we can assist you in maximising processing efficiency and end product performance.

EN-Engineering-Product-Hot-Rolled-AbrasionResistant-Valast 450-PropertiesTSN

Properties

Mechanical properties

3 ≤ thickness ≤ 11 mm
Valast 450  Valast 450 
(Typical value) (Guaranteed)
Hardness HBW 450 420 - 480
Yield strength1 Rp0.2 (N/mm2) 1225  
Tensile strength1 Rm (N/mm2) 1450  
Elongation 1 L0 = 5.65 √S0 (%) 9  
Bending radius     4.5t
1. Mechanical properties are tested in longitudinal direction, based on thicknesses between 4mm and 8mm.
    For other thicknesses please contact us.
2. Minimal radius at bending over 90° - bend line parallel to the rolling direction.


Impact strength

Direction
Temperature Guaranteed
Longitudinal -40°C ≥ 34 J/cm2

A value of 34 J/cm2corresponds to 27J for a full size 10x10mm test piece


Chemical composition

Valast meets the requirements of the cast analysis in the standard as shown in the table below:

Grade
Valast 450
C ≤ 0.230
Mn ≤ 1.000
P ≤ 0.020
S ≤ 0.005
Si ≤ 0.100
Alsol ≥ 0.015
Nb ≤ 0.060
V ≤ 0.100
Ti ≤ 0.060
Mo ≤ 0.250
B ≤ 0.005
All values are in weight%.

 

EN-Engineering-Product-Hot-Rolled-AbrasionResistant-Valast 450-DimensionsTSN

Dimensions

Dimensional capability – non-pickled

Dimensions in mm.

Thickness
Max. width 
From - up to Valast 450
2.00 - 3.001 1200
3.00 - 4.001 15002
4.00 - 5.00 17002
5.00 - 6.00 18502
6.00 - 7.00 19002
7.00 - 8.00 19502
8.00 - 10.00 2000
10.00 - 11.00 16252
1. Thicknesses below 4 mm and above 8 mm are under development. Please contact us for availability.
2. Larger widths are under development. Please contact us for availability.
The minimum width is 1000 mm.
For coil orders below 1500 mm wide a minimum order quantity may apply. Please contact us to discuss.
 

Tolerances

Thickness

Complies with ½ EN 10051.

Length, width, shape and flatness

Complies with EN 10051. Tighter tolerances available on request.

 

EN-EngineeringAutomotive-Product-Hot-rolled-All grades Shape and dimensional tolerances TSE

Shape and dimensional tolerances

Shape and dimensional tolerances

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:

length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

 

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in EN 10051:2010.

Tighter tolerances are available as shown below:

Product type Thickness tolerances available
  (% of full EN 10051:2010 tolerance)
  100% 75% 66% 60% 50% 33%

Steel for forming

Yes

Yes

Yes

Yes

Yes

Yes 1

High-strength low-alloy
(HSLA EN 10149-2)

Yes

Yes

Yes

Yes

Yes

Yes 1

Ympress® HSLA

 

 

 

 

Yes

Yes 1

Ympress® Laser

 

 

 

 

Yes

Yes 1

Structural steel

Yes

Yes

Yes

Yes

Yes

Yes 1

Boron manganese steel Yes Yes Yes Yes Yes  

Case-hardening steel

Yes

Yes

Yes

Yes

Yes

 

High-carbon steel

Yes

 

 

 

 

 

Dual phase steel

Yes

 

 

 

 

 

Hot forming steel

Yes

 

 

 

 

 

Valast® abrasion resistant steel

Yes

Yes

Yes

Yes

Yes

 

Steel for pressure vessels

Yes

 

 

 

 

 

Steel for gas cylinders

Yes

 

 

 

 

 

Steel for line pipe

Yes

 

 

 

 

 

Ship plate

Yes

 

 

 

 

 

1. Available for certain grades and thicknesses between 3.0mm and 6.0mm.
Please contact us on the availability of special tolerances to meet your requirements.
 
Tolerances on thickness for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)
Nominal thickness Tolerances for a nominal width of
≤ 1200 > 1200 > 1500 > 1800
≤ 1500 ≤ 1800

 

≤ 2.00

± 0.13

± 0.14

± 0.16

-

> 2.00

≤ 2.50

± 0.14

± 0.16

± 0.17

± 0.19

> 2.50

≤ 3.00

± 0.15

± 0.17

± 0.18

± 0.20

> 3.00

≤ 4.00

± 0.17

± 0.18

± 0.20

± 0.20

> 4.00

≤ 5.00

± 0.18

± 0.20

± 0.21

± 0.22

> 5.00

≤ 6.00

± 0.20

± 0.21

± 0.22

± 0.23

> 6.00

≤ 8.00

± 0.22

± 0.23

± 0.23

± 0.26

> 8.00

≤ 11.00

± 0.24

± 0.25

± 0.25

± 0.28

All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
Re ≤ 300 N/mm2 (category A)
Nominal thickness Tolerances for a nominal width of
≤ 1200 > 1200 > 1500 > 1800
≤ 1500 ≤ 1800
 

≤ 2.00

± 0.17

± 0.19

± 0.21

-

> 2.00

≤ 2.50

± 0.18

± 0.21

± 0.23

± 0.25

> 2.50

≤ 3.00

± 0.20

± 0.22

± 0.24

± 0.26

> 3.00

≤ 4.00

± 0.22

± 0.24

± 0.26

± 0.27

> 4.00

≤ 5.00

± 0.24

± 0.26

± 0.28

± 0.29

> 5.00

≤ 6.00

± 0.26

± 0.28

± 0.29

± 0.31

> 6.00

≤ 8.00

± 0.29

± 0.30

± 0.31

± 0.35

> 8.00

≤ 10.00

± 0.32

± 0.33

± 0.34

± 0.40

> 10.00

≤ 12.50

± 0.35

± 0.36

± 0.37

± 0.43

> 12.50

≤ 15.00

± 0.37

± 0.38

± 0.40

± 0.46

> 15.00

≤ 25.00

± 0.40

± 0.42

± 0.45

± 0.50

All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
300 N/mm2 < Re ≤ 360 N/mm2 (category B)
Nominal thickness Tolerances for a nominal width of
≤ 1200 > 1200 > 1500 > 1800
≤ 1500 ≤ 1800

 

≤ 2.00

± 0.20

± 0.22

± 0.24

-

> 2.00

≤ 2.50

± 0.21

± 0.24

± 0.26

± 0.29

> 2.50

≤ 3.00

± 0.23

± 0.25

± 0.28

± 0.30

> 3.00

≤ 4.00

± 0.25

± 0.28

± 0.30

± 0.31

> 4.00

≤ 5.00

± 0.28

± 0.30

± 0.32

± 0.33

> 5.00

≤ 6.00

± 0.30

± 0.32

± 0.33

± 0.36

> 6.00

≤ 8.00

± 0.33

± 0.35

± 0.36

± 0.40

> 8.00

≤ 10.00

± 0.37

± 0.38

± 0.39

± 0.46

> 10.00

≤ 12.50

± 0.40

± 0.41

± 0.43

± 0.49

> 12.50

≤ 15.00

± 0.43

± 0.44

± 0.46

± 0.53

> 15.00

≤ 25.00

± 0.46

± 0.48

± 0.52

± 0.58

All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
360 N/mm2 < Re ≤ 420 N/mm2 (category C)
Nominal thickness

Tolerances for a nominal width of

≤ 1200 > 1200 > 1500 > 1800
≤ 1500 ≤ 1800

 

≤ 2.00

± 0.22

± 0.25

± 0.27

-

> 2.00

≤ 2.50

± 0.23

± 0.27

± 0.30

± 0.33

> 2.50

≤ 3.00

± 0.26

± 0.29

± 0.31

± 0.34

> 3.00

≤ 4.00

± 0.29

± 0.31

± 0.34

± 0.35

> 4.00

≤ 5.00

± 0.31

± 0.34

± 0.36

± 0.38

> 5.00

≤ 6.00

± 0.34

± 0.36

± 0.38

± 0.40

> 6.00

≤ 8.00

± 0.38

± 0.39

± 0.40

± 0.46

> 8.00

≤ 10.00

± 0.42

± 0.43

± 0.44

± 0.52

> 10.00

≤ 12.50

± 0.46

± 0.47

± 0.48

± 0.56

> 12.50

≤ 15.00

± 0.48

± 0.49

± 0.52

± 0.60

> 15.00

≤ 25.00

± 0.52

± 0.55

± 0.59

± 0.65

All dimensions are mm.
Tolerances on thickness of steel grades with a specified minimum yield strength
420 N/mm2 < Re ≤ 900 N/mm2 (category D)

Nominal thickness

Tolerances for a nominal width of
≤ 1200 > 1200 > 1500 > 1800
≤ 1500 ≤ 1800

 

≤ 2.00

± 0.24

± 0.27

± 0.29

-

> 2.00

≤ 2.50

± 0.25

± 0.29

± 0.32

± 0.35

> 2.50

≤ 3.00

± 0.28

± 0.31

± 0.34

± 0.36

> 3.00

≤ 4.00

± 0.31

± 0.34

± 0.36

± 0.38

> 4.00

≤ 5.00

± 0.34

± 0.36

± 0.39

± 0.41

> 5.00

≤ 6.00

± 0.36

± 0.39

± 0.41

± 0.43

> 6.00

≤ 8.00

± 0.41

± 0.42

± 0.43

± 0.49

> 8.00

≤ 10.00

± 0.45

± 0.46

± 0.48

± 0.56

> 10.00

≤ 12.50

± 0.49

± 0.50

± 0.52

± 0.60

> 12.50

≤ 15.00

± 0.52

± 0.53

± 0.56

± 0.64

> 15.00

≤ 25.00

± 0.56

± 0.59

± 0.63

± 0.70

All dimensions are mm.

Tolerances on width

Tolerances in mm.

Nominal width w
Mill edges Trimmed edges
lower upper lower upper

 w ≤ 1200

0

20

0

3

 1200 < w ≤ 1850

0

20

0

5

 w > 1850

0

25

0

6

Tolerances  in mm for wide strip and slit wide strip
The tolerances for wide strip and slit wide strip comply with standard EN 10051:2010.

The specified values for wide strip do not apply to the uncropped ends of the coil (‘head’ and ‘tail’). The length of these uncropped ends is calculated using the following formula:
length (in metres) = 90/nominal thickness (in mm), with a maximum of 20 metres.

If required, this part of the coil can be removed, however an additional cost may be charged for this.

Edge camber

The deviation from the edge over a length of 5000mm:

• with mill edges, no more than 20mm
• with trimmed edges, no more than 15mm

Flatness

Requirements as regards flatness can be agreed at the time of enquiry.

Option for maximum crown values

The following high crown C40 options available for hot-rolled products.

Crown values on the C20-position as well as minimum crown values on both C20 and C40 position are also available on request.

 

Maximum Crown C40 in µm values for hot-rolled steel with a low carbon content for cold forming
(DD11-DD14 in EN 10111:2008)

Category 1

C40

     
Nominal Thickness

≤ 1200

> 1200

> 1500

> 1800

≤ 1500

≤ 1800

> 1.47

≤ 2.00

40

40

40

40

> 2.00

≤ 2.50

40

40

50

50

> 2.50

≤ 3.00

40

40

50

50

> 3.00

≤ 6.00

40

50

50

50

> 6.00

≤ 11.00

50

50

50

50

 

Maximum Crown C40 in µm values of structural steel grades
(S185-S235-S275 ≤ 10mm in EN 10025-2:2004)

Category 2

C40

     
Nominal Thickness

≤ 1200

> 1200

> 1500

> 1800

≤ 1500

≤ 1800

> 1.47

≤ 2.00

40

40

40

40

> 2.00

≤ 2.50

40

40

50

50

> 2.50

≤ 20.00

50

50

50

50

 

Maximum Crown C40 in µm values of structural steel grades(S275 > 10mm in EN 10025-2:2004)
 and HSLA grades (S315MC in EN 10149-2:1996)

Category 3

C40

     
Nominal Thickness

≤ 1200

> 1200

> 1500

> 1800

≤ 1500

≤ 1800

> 1.47

≤ 2.00

50

50

60

60

> 2.00

≤ 2.50

50

60

60

60

> 2.50

≤ 3.00

50

60

60

60

> 3.00

≤ 20.00

60

60

70

70

 

Maximum Crown C40 in µm values of HSLA grades
 (S355MC, S420MC, S460MC, S500MC, S550MC in EN 10149-2:1996)

Category 4

C40

     
Nominal Thickness

≤ 1200

> 1200

> 1500

> 1800

≤ 1500

≤ 1800

> 1.47

≤ 2.00

60

70

70

70

> 2.00

≤ 2.50

60

70

80

80

> 2.50

≤ 3.00

60

70

80

80

> 3.00

≤ 5.00

70

70

80

80

> 5.00

≤ 20.00

80

80

80

80

 

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights:

Description

Availability

Coil diameter inner non-pickled

762mm

Coil diameter inner pickled

610mm standard

762mm on request

Tolerance on inner diameter

+0/-50mm

Coil diameter outer non-pickled

Outer diameter available is 10/7 x width

to reduce possibility of coil tipping over

Max. 2200mm

Min. 1050mm

Coil diameter outer pickled and oiled

Outer diameter available is 10/7 x width

to reduce possibility of coil tipping over

Outer diameter

limit 2200mm

Min. 1050mm

Coil weight

Max. 34 tonnes

Additional maximum limits from transport

limits and outer coil diameter

Some HR products may have different

coil weight ranges

KIM: width ≤ 1200mm

15.5 - 23.0 kg/mm width

KIM: 1200 < width ≤ 1700mm

12.1 - 21.7 kg/mm width

KIM: width > 1700mm

11.0 kg/mm width and 12.1 - 21.7 kg/mm width

Minimum tonnage per order

Please refer to price list for order quantity details

Minimum order quantities may apply

 

 

 

 

EN-Engineering-Product-Hot-Rolled-AbrasionResistant-Valast-DownloadTSN

Download

Download: