Three types of metallic coating are available:
Galvanised steel (+Z) is coated with an almost pure zinc coating (>99% zinc).
Galvannealed steel (+ZF) is coated with a zinc coating containing
approximately 8-12% iron. For further information on our galvannealed coatings please visit our Automotive catalogue.
MagiZinc steel (+ZM) is coated with a zinc coating containing
additional magnesium and aluminium.
|Pure zinc (Z)||100 (7 µm/side)||600 (42 µm/side)|
|Zinc-iron (ZF)||100 (7 µm/side)||140 (10 µm/side)|
|MagiZinc (ZM)1||100 (7 µm/side)||200 (14 µm/side)|
Coating weight measured in g/m2 double-sided (µm, per side).
Coils with coatings > 350 g/m2 produced in the Netherlands will be supplied in oscillated coiled condition.
Coils coated with 600 g/m2 and produced in the Netherlands are only available in width range 980 to 1300 mm.
1MagiZinc (ZM) coatings up to 310 g/m2 available on request. For coating weights below 100 g/m2 please visit our Automotive catalogue.
Strip product catalogue booklet
Strip products and services catalogue 2018
This is a pdf version of the most recently issued printed booklet.
Sales terms and conditions
Strip products produced in IJmuiden
Metallic coated product families
Our cold-rolled forming steels are available in a wide range of grades and corrosion-resistant coatings.
Each grade is designed for specific applications and comes with a choice of surface quality. Extensive dimensional choice provides opportunities for cutting waste and maximising yield.
MagiZinc® improves corrosion resistance with half the thickness of conventional zinc coatings, increasing yield, reducing cost and facilitating stronger, lighter products.
It offers improved automotive corrosion protection and higher process efficiency.
Our range of metallic coated high-strength steels includes micro-alloyed, phosphorus-alloyed and bake-hardening grades. Available with various corrosion-resistant coatings, they are ideal for applications requiring strength without a weight penalty.
Tata Steel’s metallic coated structural steel behaves reliably in roll-forming and bending processes and is suitable for welding.
For exceptionally demanding applications, we have grades that exceed the minimum strength levels specified in EN 10346:2015.
- Agricultural components
- Building components
- Domestic appliances