Colorcoat High Reflect
Specification details

EN-Construction-Product-Colorcoat High Reflect | Product benefits

Product benefits

<ul> <li>≥ 85% reflectance, reducing the amount of energy required to achieve the same level of lighting.</li> <li>Significantly reduces CO2 emissions by 2-3% per year, helping to achieve compliance with tightening regulations.</li> <li><span>Can improve daylight factor by 10%.<br/> </span></li> <li><span>Possible energy savings of up to 12% per annum.<br/> </span></li> <li><span><span>Smooth 30μm polyester coating.<br/> </span></span></li> <li><span><span>Galvanised substrate with Zinc metallic coating or equivalent for very good corrosion resistance.<br/> </span></span></li> <li><span><span>High-performance reverse side backing coat specially formulated for use in construction applications providing good adhesion to standard systems.</span></span></li> </ul>

EN-Construction-Product-Colorcoat High Reflect | Product performance

Product performance

<p>Colorcoat® High Reflect is carefully manufactured in a controlled process to ensure consistent quality and is suitable for interior roof and wall liner trays, cassette systems and composite panels in dry and unpolluted environments. Foam composite panels should always be stacked liner to liner with Colorcoat® High Reflect until cool.</p> <p> </p> <p>Colorcoat® High Reflect is not suitable for external applications and to ensure it is fitted in the optimum condition, outdoor storage should be minimised during the construction process.</p> <p> </p> <p>Colorcoat® High Reflect can be expected to last the life of the building in normal, controlled, dry and unpolluted environments.</p> <p> </p> <p>Tata Steel has a range of Colorcoat® products suitable for different environments and applications.</p> <p> </p>

EN-Construction-Product-Colorcoat High Reflect | Typical properties

Typical properties
 Properties     Test standard
Nominal organic
coating thickness
μm* 30 EN 13523-1
Specular Gloss (60°) % 25-35 EN 13523-2
Resistance to rapid
deformation
(Reverse impact)
J > 9 EN 13523-5
Paint adhesion
(cross hatch)
  No pick off EN 13523-6
Flexibility:
Minimum bend radius
T 5T (16°C) EN 13523-7
Adhesion T 3T EN 13523 - 7
Reflectance (Y value) % ≥ 85%  
Pencil hardness
(Surface marking)
  HB – 5H EN 13523-4
Solvent resistance
(MEK rubs)
  > 100 EN 13523-11
Corrosion resistance:
Salt spray
hours 500 EN 13523-8
Corrosion resistance:
Humidity
hours 500 EN 13523-26
Fire performance    Class 0 surface BS 476 Part 6&7
Reaction to fire   A1 EN 13501-1 
Internal environment classification   CP12 EN 10169

*μm = micron

General notes
The figures contained in this table are typical properties and do not constitute a specification. These figures relate to the topcoat.