Roof profiles
Acoustic RoofDek

Offering a range of tried and tested acoustic profiles which achieve various sound absorption ratings from A–D.

Our acoustic RoofDek product range is available with perforated webs to provide acoustic absorption. Two different open area percentage figures are in general use. The percentage of exposed area is the open area divided by the exposed area of steel following around the profiles. The percentage of cover area is the open area divided by the plan area of the soffit.

All RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction.

Request a bespoke product specific EN 15804 Type III EPD to help accrue points under building certification schemes such as LEED and BREEAM.

RoofDek D159 Perforated 3D render
RoofDek steel profiles
RoofDek D60 Perforated 3D render
Maplefields School
RoofDek D46 Perforated 3D render
RoofDek Tata Steel construction decking
Product specification

EN-Construction-Product-Acoustic RoofDek - D46 perforated

RoofDek D46 perforated
Specification details for RoofDek D46 perforated

EN-Construction-Product-Acoustic RoofDek - D46 perforated | Acoustic profile specification

Acoustic profile specification

D46 perforating information

Perforating pattern 4546 4.5mm holes at 6.3mm triangular centres. Pattern open area 46.0%.

Web perforated RoofDek D46 provides an open area 10.7% of exposed area, or 13.0% of the cover area.

 

D46 perforated profile

Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
Steel 0.70 Interior Liner & Galvatite 6.49 1614 2152 55 400 475
Steel 0.90 Interior Liner & Galvatite 8.35 2667 3003 65 400 550
Steel 1.20 Interior Liner & Galvatite 11.15 2959 3874 75 - 600
Aluminium 0.90 Stucco 2.89 1202* 1602 55 400 325
Aluminium 1.20 Mill 3.86 2037 2441 65 - 400

 

Notes
1. Aluminium profiles are subject to minimum order quantities.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min flange steel beam.
4. The Interior Liner colour on D135, D153 & D200 is RAL 9002.
    RAL 9001 is available upon specific request.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software, which includes [RoofDek Analysis Software].

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek - D60 perforated

RoofDek D60 perforated
Specification details for RoofDek D60 perforated

EN-Construction-Product-Acoustic RoofDek - D60 perforated | Acoustic profile specification

Acoustic profile specification

D60 perforating information

Perforating pattern 4546 4.5mm holes at 6.3mm triangular centres. Pattern open area 46.0%.

Web perforated D60 provides an open area 13.9% of exposed area, or 19.6% of the cover area.

 

D60 perforated profile

Material Gauge and finish(mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
Steel 0.70 Interior Liner & Galvatite 7.25 1647 2196 70 - 600
Steel 0.90 Interior Liner & Galvatite 9.33 2725 3425 80 - 675
Steel 1.20 Interior Liner & Galvatite 12.45 3621 4499 85 - 725
Aluminium 0.90 Stucco 3.23 1232 1642 70 - 475
Aluminium 1.20 Mill 4.31 2123 2778 80 - 525

Notes
1. Aluminium profiles are subject to minimum order quantities.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min flange steel beam.
4. The Interior Liner colour on D135, D153 & D200 is RAL 9002.
    RAL 9001 is available upon specific request.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software, which includes [RoofDek Analysis Software].

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek - D100 perforated

RoofDek D100 perforated
Specification details for RoofDek D100 perforated

EN-Construction-Product-Acoustic RoofDek - D100 perforated | Acoustic profile specification

Acoustic profile specification

D100 perforating information

Perforating pattern 4546 4.5mm holes at 6.3mm triangular centres. Pattern open area 46.0%.

Web perforated D100 provides an open area 13.3% of exposed area, or 21.1% of the cover area.

 

D100 perforated profile

Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
Steel 0.90 Interior Liner & Galvatite 10.92 3574 4453 120 - 975
Steel 1.20 Interior Liner & Galvatite 14.58 5212 6066 125 - 1050
Aluminium 0.90 Stucco 3.79 1647 2196 110 - 700
Aluminium 1.20 Mill 5.05 3062 3733 120 - 775

Notes
1. Aluminium profiles are subject to minimum order quantities.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min flange steel beam.
4. The Interior Liner colour on D135, D153 & D200 is RAL 9002.
    RAL 9001 is available upon specific request.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software, which includes [RoofDek Analysis Software].

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek - D137 perforated

RoofDek D137 perforated
Specification details for RoofDek D137 perforated

EN-Construction-Product-Acoustic RoofDek - D137 perforated | Acoustic profile specification

Acoustic profile specification

D137 perforating information

Perforating pattern 3327 3.3mm holes at 6.0mm triangular centres. Pattern open area 27%.

159.jpg

Web perforated D137 provides an open area 7.0% of exposed area, or 11.5% of the cover area.

 

D137 perforated profile

Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
Steel 0.75 Interior Liner 8.79 3152 4149 150 - 788
Steel 0.90 Interior Liner 10.55 4759 5269 160 - 1190
Steel 1.25 Interior Liner 14.68 6155 7598 180 - 1539
Aluminium 1.20 4.88 3710 4259 170 - 928

Notes
1. Aluminium profiles are subject to minimum order quantities.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min flange steel beam.
4. The Interior Liner colour on D137, D153 & D200 is RAL 9002.
    RAL 9001 is available upon specific request.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software, which includes [RoofDek Analysis Software].

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek - D153 perforated

RoofDek D153 perforated
Specification details for RoofDek D153 perforated

EN-Construction-Product-Acoustic RoofDek - D153 perforated | Acoustic profile specification

Acoustic profile specification

D153 perforating information

Perforating pattern P3L-S 3.0mm holes at 5.5mm square centres. Pattern open area 23.5%.

Web perforated D153 provides an open area 6.2% of exposed area, or 11.0% of the cover area.

 

D153 perforated profile

Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
Steel 0.75 Interior Liner 9.86 3421 4200 165 - 1100
Steel 0.88 Interior Liner 11.58 5012 5150 175 - 1150
Steel 1.25 Interior Liner 16.46 6730 7442 195 - 1250

Notes
1. Aluminium profiles are subject to minimum order quantities.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min flange steel beam.
4. The Interior Liner colour on D135, D153 & D200 is RAL 9002.
    RAL 9001 is available upon specific request.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software, which includes [RoofDek Analysis Software].

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek - D159 perforated

RoofDek D159 perforated
Specification details for RoofDek D159 perforated

EN-Construction-Product-Acoustic RoofDek - D159 perforated | Acoustic profile specification

Acoustic profile specification

D159 perforating information

Perforating pattern 3327 3.0mm holes at 6.0mm triangular centres. Pattern open area 27.0%.

Web perforated D159 provides an open area 7.6% of exposed area, or 14.2% of the cover area.

 

D159 perforated profile

Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
Steel 1.25 Interior Liner 17.80 7084 7853 220 - 1400
Aluminium 1.50 Mill 7.40 5222 5942 200 - 1100

Notes
1. Aluminium profiles are subject to minimum order quantities.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min flange steel beam.
4. The Interior Liner colour on D135, D153 & D200 is RAL 9002.
    RAL 9001 is available upon specific request.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software, which includes [RoofDek Analysis Software].

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek - D200 perforated

RoofDek D200 perforated
Specification details for RoofDek D200 perforated

EN-Construction-Product-Acoustic RoofDek - D200 perforated | Acoustic profile specification

Acoustic profile specification

D200 perforating information

Perforating pattern P3L-S 3.0mm holes at 5.5mm square centres. Pattern open area 23.5%.

Web perforated D200 provides an open area 5.0% of exposed area, or 10.0% of the cover area.

 

D200 perforated profile

Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
Steel 0.88 Interior Liner 13.13 3583 4778 260 - 1200
Steel 1.25 Interior Liner 18.67 7739 7890 280 - 1700
Steel 1.50 Interior Liner 22.41 8945 9494 300 - 1800

Notes
1. Aluminium profiles are subject to minimum order quantities.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min flange steel beam.
4. The Interior Liner colour on D135, D153 & D200 is RAL 9002.
    RAL 9001 is available upon specific request.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software, which includes [RoofDek Analysis Software].

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-Acoustic RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

If you have any questions or for further information click here to contact us.