• Choose Language
  • Service Centres - Benelux - General Industry

    MultiSteel offers one of the broadest multi-metal ranges in Europe, including HRP, CRC, HDG, DSP and OCS.
    Our facilities convert wide and light gauge strip coil into precision slit coil, de-coiled sheets, and multi-strand blanks with widths up to 1.8m, thickness from 0.2-3.0mm and a strength level up to 800 MPa.

    All products are produced to the highest standards (IATF 16949:2016 certified), and tailored to meet our customers’ needs across a whole range of industries such as construction, agricultural machinery, domestic appliances and general industry. Having direct access to water ensures an efficient and seamless inbound / outbound logistics from our mill all the way through to customers.

    • Multi-strand blanks
      We have special gear for cutting numerous flat rectangular blanks simultaneously at different blank widths, from main coils with a max width of up to 1850mm, in thicknesses from 0,3mm to 3mm.
    • Critical surface quality
      Our equipment and processing capabilities meet the highest surface requirement for outer panels for critical products such as full-finish hot-dip galvanised (HDG) and Organic Coated Steel (OCS).
    • Ultra-thin gauge
      MultiSteel is equipped with slitting capabilities starting from minimum gauge of 0,2mm and a min width of 25mm which requires accurate slitting gear and precision tooling.
    • Ymvit® steel for enamelling

      Ymvit® cold-rolled steel for enamelling provides strong coating adhesion and reliable deep drawing. Ymvit® Ultra grades provide improved resistance to carbon boiling.

      Applications include barbecues, bathroom furniture, heat-exchange panels, photovoltaic solar panels, white boards and wall panels.

    • Colorcoat HPS200 Ultra®

      Colorcoat HPS200 Ultra pre-finished steel combines outstanding performance with exceptional durability.

      With its market-leading guarantees and excellent sustainability credentials Colorcoat HPS200 Ultra is suitable for many different construction applications.

      Multisteel can process a variety of OCS products in different forms, including wide and slit coils, multi-strand blanks and add protective films. 

    MultiSteel Service Centre

    MultiSteel Service Centre

    Fregatweg 44b

    6222 NZ Maastricht

    The Netherlands

    General Enquiries:

    T +31 (0) 433 688444

    Overview

     

    Location

    MultiSteel – located in Maastricht, in the south-east of the Netherlands is close to a harbour.  Harbour access ensures efficient, seamless inbound and outbound logistics from our steel mill all the way through to customers.


    Technical expertise

    Tata Steel product specialists are experienced with our current products and have extensive knowledge about new developed products. We can also support your with the right material selection.
    Furthermore we have specialists in all relevant areas of process knowledge and modern state of the art R&D facility.

    Global support

    Our European steel service centers offer access to Tata Steel’s global network of sales offices. This means we can support customer operations throughout Europe and beyond.

    Just-in-time delivery

    We offer significant experience in meeting the automotive market’s demand for just-in-time deliveries. Our flexibility is combined with excellent geographical reach and technical expertise. This has enabled us to become the preferred route-to-market for both direct and indirect deliveries to original equipment manufacturers and their subcontractors. Our multilingual teams are here to support you and answer all your queries.

    Applications and quality

    Steel processed at MultiSteel is used for a variety of modern components. 

    We are an IATF 16949:2016 certified Steel Service Centre which ensures a high level of quality standards.

    Products

    We process the following products:

    • Hot-rolled
      • Ympress®
    • Cold-rolled
      • Ymvit®
    • Direct-rolled
      • Ymagine®
    • Metallic coated
      • hot-dip galvanised
      • MagiZinc®
      • Electrozinc-plated
      • Galfan®
      • Galvannealed
      • hot-dip aluminised
      • Galvalume
      • Aluzinc
    • Pre-finished or organic coated
      • Colorcoat HPS200 ULTRA®
      • Colorcoat Prisma®
      • laminated

     



    back to top

    Processing capability

    MultiSteel has four production lines at its disposal that provide the possibility to make a wide variety of products. Strip steel and small coils can be produced on slitter 1 and slitter 2, sheet metal on the multi-blanker and small sheets on the mini-blanker.

    Processing unit Width   Thickness   Comments
      Min (mm) Max (mm) Min (mm) Max (mm)  
    Slitter 1 400 1850 0.3 3 Up to 40 individual slits across coil width
    Slitter 2 400 1550 0.2 1.5 Up to 40 individual slits across coil width
    Miniblanker 200 1050 0.3 0.8  Stacking up to 1250mm length blanks
    Mutiblanker 300 1850 0.3 3 Stacking up to 6000mm length blanks

    Maximum strength level is 800 MPa   
    Maximum 20t coil weight

    Please consult our sales department regarding specific technical feasibility of dimensional combinations, tolerances and grades.

     

    Contact

     

    Multisteel Service Center
    Fregatweg 44b
    6222 NZ Maastricht
    The Netherlands

    General Enquiries:
    T: +31 (0) 433 688444
    E: multisteel@tatasteeleurope.com

    site map



    back to top

     

    Overview

    Overview

     

    Location

    MultiSteel – located in Maastricht, in the south-east of the Netherlands is close to a harbour.  Harbour access ensures efficient, seamless inbound and outbound logistics from our steel mill all the way through to customers.


    Technical expertise

    Tata Steel product specialists are experienced with our current products and have extensive knowledge about new developed products. We can also support your with the right material selection.
    Furthermore we have specialists in all relevant areas of process knowledge and modern state of the art R&D facility.

    Global support

    Our European steel service centers offer access to Tata Steel’s global network of sales offices. This means we can support customer operations throughout Europe and beyond.

    Just-in-time delivery

    We offer significant experience in meeting the automotive market’s demand for just-in-time deliveries. Our flexibility is combined with excellent geographical reach and technical expertise. This has enabled us to become the preferred route-to-market for both direct and indirect deliveries to original equipment manufacturers and their subcontractors. Our multilingual teams are here to support you and answer all your queries.

    Applications and quality

    Steel processed at MultiSteel is used for a variety of modern components. 

    We are an IATF 16949:2016 certified Steel Service Centre which ensures a high level of quality standards.

    Products

    We process the following products:

    • Hot-rolled
      • Ympress®
    • Cold-rolled
      • Ymvit®
    • Direct-rolled
      • Ymagine®
    • Metallic coated
      • hot-dip galvanised
      • MagiZinc®
      • Electrozinc-plated
      • Galfan®
      • Galvannealed
      • hot-dip aluminised
      • Galvalume
      • Aluzinc
    • Pre-finished or organic coated
      • Colorcoat HPS200 ULTRA®
      • Colorcoat Prisma®
      • laminated

     



    back to top

    Processing capability

    Processing capability

    MultiSteel has four production lines at its disposal that provide the possibility to make a wide variety of products. Strip steel and small coils can be produced on slitter 1 and slitter 2, sheet metal on the multi-blanker and small sheets on the mini-blanker.

    Processing unit Width   Thickness   Comments
      Min (mm) Max (mm) Min (mm) Max (mm)  
    Slitter 1 400 1850 0.3 3 Up to 40 individual slits across coil width
    Slitter 2 400 1550 0.2 1.5 Up to 40 individual slits across coil width
    Miniblanker 200 1050 0.3 0.8  Stacking up to 1250mm length blanks
    Mutiblanker 300 1850 0.3 3 Stacking up to 6000mm length blanks

    Maximum strength level is 800 MPa   
    Maximum 20t coil weight

    Please consult our sales department regarding specific technical feasibility of dimensional combinations, tolerances and grades.

     

    Downloads

    Contact

    Contact

     

    Multisteel Service Center
    Fregatweg 44b
    6222 NZ Maastricht
    The Netherlands

    General Enquiries:
    T: +31 (0) 433 688444
    E: multisteel@tatasteeleurope.com

    site map



    back to top