Roof profiles

RoofDek - Steel roof decking

Building Systems UK (a Tata Steel enterprise) offers a comprehensive range of structural steel roof decking products, manufactured in the UK, ranging from 32mm to 200mm deep and a range of structural liner trays.

To download the BIM objects for the RoofDek product range please click on the 'Download BIM Objects' tab below

Request a bespoke product specific EN 15804 Type III EPD to help accrue points under building certification schemes such as LEED and BREEAM.

 

RoofDek software Tata Steel construction decking
RoofDek Tata Steel construction decking
RoofDek Tata Steel construction decking
RoofDek Tata Steel construction decking
Roofdek swimming pool BSUK tata steel construction
RoofDek Tata Steel construction decking
RoofDek steel profiles
RoofDek Tata Steel construction decking
RoofDek Tata Steel construction decking
RoofDek Tata Steel construction decking
RoofDek Tata Steel construction decking
RoofDek Tata Steel construction decking
RoofDek Tata Steel construction decking
RoofDek D46 3D render
RoofDek Tata Steel construction decking
RoofDek D32S 3D render
RoofDek Tata Steel construction decking
RoofDek Tata Steel construction decking
RoofDek Tata Steel construction decking
Product specification

EN-Construction-Product-RoofDek - D32S

RoofDek D32S
Specification details for RoofDek D32S

EN-Construction-Product-RoofDek - D32S | Structural profile specification

Structural profile specification
RoofDek D32S 3D render

RoofDek D32S is part of the shallow deck profile range which enables designers to find the balance between efficiency, aesthetics and structural performance. 

Profile Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
D32S Steel 0.70 Interior Liner & Galvatite 6.67 1650* 1800 40 - 408
Steel 0.90 Interior Liner & Galvatite 8.58 1875* 2300 45 - 485
Steel 1.20 Interior Liner & Galvatite 11.46 2100* 2800 50 - 526

 

Notes
1. When RoofDek is supplied with Colorcoat HPS200 Ultra® pre finished steel, the above load span tables do not apply. Please contact our technical team for the load span tables in this instance. 
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min. flange steel beam.
4. Load spans calculated to Eurocode 3 and 9.

If you have any questions or for further information click here to contact us.

 

EN-Construction-Product-RoofDek - D32S | Download BIM objects

Download BIM objects

BIM: The way you want it

The DNA Profiler has been designed to allow you to access Tata Steel’s product information (3d parametric objects & data) how you want, when you want, to the level of detail you want, in the format you want.

Product Name Link
RoofDek D32 0.70mm steel BIM DNA Profiler
RoofDek D32 0.90mm Alu BIM DNA Profiler
RoofDek D32 0.90mm steel BIM DNA Profiler
RoofDek D32 1.20mm Alu BIM DNA Profiler
RoofDek D32 1.20mm steel BIM DNA Profiler

In addition to our DNA Profiler, you can access our BIM content at BIMobject.com

Product Name Link
RoofDek D100 (Deep Deck) BIM Object

 

 

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

​​​​​​​If you have any questions or for further information click here to contact us.

EN-Construction-sustainability-optemis-carbon-lite

Optemis™ Carbon Lite

The launch of Optemis Carbon Lite is an important step in our ongoing decarbonisation journey. It demonstrates our progress and represents a unique solution for customers in the form of a flexible, lower CO2 steel offering.

Optemis Carbon Lite is a fully certified in-setting scheme with COsavings achieved from implemented projects, verified by a 3rd party auditor, DNV, and credited to our CO2 bank.  Our continued commitment to decarbonisation means reductions in CO2 emissions can now be passed on to our customers, enabling them to achieve immediate Scope 3 emission savings.

Revenues generated from the sale of Optemis Carbon Lite declarations are used to fund additional decarbonisation projects, generating further CO2 savings to be verified by DNV and speeding up our decarbonisation efforts.

By buying Optemis Carbon Lite from Tata Steel UK we, and our customers, will be actively contributing to a reduction in atmospheric CO2.

Find out more about Optemis Carbon Lite


Please accept marketing cookies to reach this.

Picture100.png

 

EN-Construction-Book a CPD

Book a CPD

We offer a range of face to face and online CPDs aimed at Engineers and Architects

These free seminars can be booked at any time between 9am and 5pm. Our online webinars can all be delivered via Skype for Business and Teams, but we can consider other platforms if this will not work for your practice.

Below outline the CPDs we have available - Book yours today

  • Decarbonising your structural hollow section designs
  • Essentials of Structural Hollow Sections
  • Welded Joints in Tubular Steelwork - Eurocode 3 Part 1-8
  • Concrete Filled Hollow Sections - Composite Design – Eurocode 4
  • Composite Floor Deck in Construction
  • Structural Roof Deck in Construction
  • Specifying metal clad envelope systems in accordance with ADB2 of the building regulations and the value of large scale system testing
  • RIBA 2030 climate challenge: How steel building envelope solutions contribute
  • Pre-finished steel standing seam systems for roof & wall cladding
  • CDM regulations 2015 and their impact on steel building envelope specification.
  • Steel building envelope systems for non-domestic buildings
  • Steel for roof and wall cladding

Book your CPD today

RIBA Approved CPD tata steel

 

 

 

 

 

 

EN-Construction-Product-RoofDek - D35

RoofDek D35
Specification details for RoofDek D35

EN-Construction-Product-RoofDek - D35 | Structural profile specification

Structural profile specification
RoofDek Tata Steel construction decking

RoofDek D35 is part of the shallow deck profile range which enables designers to find the balance between efficiency, aesthetics and structural performance. 

Profile Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum factory curve (mm) Cantillever (mm)
D35 Steel 0.70 Interior Liner & Galvatite 7.08 1803 2519 40 400 470
Steel 0.90 Interior Liner & Galvatite 9.11 2114 2835 50 400 529
Steel 1.20 Interior Liner & Galvatite 12.16 2404 3224 60 - 601
Aluminium 0.90 Stucco 3.16 1311 1960 40 400 378
Aluminium 1.20 Mill 4.21 1525 2267 50 - 423

Notes
1. When RoofDek is supplied with Colorcoat HPS200 Ultra® pre finished steel, the above load span tables do not apply. Please contact our technical team for the load span tables in this instance.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min. flange steel beam.
4. Load spans calculated to Eurocode 3 and 9.

If you have any questions or for further information click here to contact us.

Request a product sample

EN-Construction-Product-RoofDek - D35 | Download BIM objects

Download BIM objects

BIM: The way you want it

The DNA Profiler has been designed to allow you to access Tata Steel’s product information (3d parametric objects & data) how you want, when you want, to the level of detail you want, in the format you want.

Product Name Link
RoofDek D35 0.70mm steel BIM DNA Profiler
RoofDek D35 0.90mm Alu BIM DNA Profiler
RoofDek D35 0.90mm steel BIM DNA Profiler
RoofDek D35 1.20mm Alu BIM DNA Profiler
RoofDek D35 1.20mm steel BIM DNA Profiler

In addition to our DNA Profiler, you can access our BIM content at BIMobject.com

Product Name Link
RoofDek D35 (Deep Deck) BIM Object

​​​​​​​​​​​​​​

 

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-sustainability-optemis-carbon-lite

Optemis™ Carbon Lite

The launch of Optemis Carbon Lite is an important step in our ongoing decarbonisation journey. It demonstrates our progress and represents a unique solution for customers in the form of a flexible, lower CO2 steel offering.

Optemis Carbon Lite is a fully certified in-setting scheme with COsavings achieved from implemented projects, verified by a 3rd party auditor, DNV, and credited to our CO2 bank.  Our continued commitment to decarbonisation means reductions in CO2 emissions can now be passed on to our customers, enabling them to achieve immediate Scope 3 emission savings.

Revenues generated from the sale of Optemis Carbon Lite declarations are used to fund additional decarbonisation projects, generating further CO2 savings to be verified by DNV and speeding up our decarbonisation efforts.

By buying Optemis Carbon Lite from Tata Steel UK we, and our customers, will be actively contributing to a reduction in atmospheric CO2.

Find out more about Optemis Carbon Lite


Please accept marketing cookies to reach this.

Picture100.png

 

EN-Construction-Product-RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

​​​​​​​If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek-D35-downloads

Downloads

Select from below downloads

EN-Construction-Book a CPD

Book a CPD

We offer a range of face to face and online CPDs aimed at Engineers and Architects

These free seminars can be booked at any time between 9am and 5pm. Our online webinars can all be delivered via Skype for Business and Teams, but we can consider other platforms if this will not work for your practice.

Below outline the CPDs we have available - Book yours today

  • Decarbonising your structural hollow section designs
  • Essentials of Structural Hollow Sections
  • Welded Joints in Tubular Steelwork - Eurocode 3 Part 1-8
  • Concrete Filled Hollow Sections - Composite Design – Eurocode 4
  • Composite Floor Deck in Construction
  • Structural Roof Deck in Construction
  • Specifying metal clad envelope systems in accordance with ADB2 of the building regulations and the value of large scale system testing
  • RIBA 2030 climate challenge: How steel building envelope solutions contribute
  • Pre-finished steel standing seam systems for roof & wall cladding
  • CDM regulations 2015 and their impact on steel building envelope specification.
  • Steel building envelope systems for non-domestic buildings
  • Steel for roof and wall cladding

Book your CPD today

RIBA Approved CPD tata steel

 

 

 

 

 

 

EN-Construction-Product-RoofDek - D46

RoofDek D46
Specification details for RoofDek D46

EN-Construction-Product-RoofDek - D46 | Structural profile specification

Structural profile specification

RoofDek D46 is part of the shallow deck profile range which enables designers to find the balance between efficiency, aesthetics and structural performance. 

Profile Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum factory curve (mm) Cantillever (mm)
D46 Steel 0.70 Interior Liner & Galvatite 7.20 2433 3120 55 400 608
Steel 0.90 Interior Liner & Galvatite 9.26 2708 3631 65 400 677
Steel 1.20 Interior Liner & Galvatite 12.37 2994 4015 75 - 749
Aluminium 0.90 Stucco 3.21 1762 2501 55 400 466
Aluminium 1.20 Mill 4.28 2051 2761 65 - 515

Notes
1. When RoofDek is supplied with Colorcoat HPS200 Ultra® pre finished steel, the above load span tables do not apply. Please contact our technical team for the load span tables in this instance.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min. flange steel beam.
4. Load spans calculated to Eurocode 3 and 9.

If you have any questions or for further information click here to contact us.

Request a product sample

EN-Construction-Product-RoofDek - D46 | Download BIM objects

Download BIM objects

BIM: The way you want it

The DNA Profiler has been designed to allow you to access Tata Steel’s product information (3d parametric objects & data) how you want, when you want, to the level of detail you want, in the format you want.

Product Name Link
RoofDek D46 0.70mm steel BIM DNA Profiler
RoofDek D46 0.70mm steel - Colorcoat BIM DNA Profiler
RoofDek D46 0.70mm steel perforated BIM DNA Profiler
RoofDek D46 0.70mm steel perforated - Colorcoat BIM DNA Profiler
RoofDek D46 0.90mm Alu BIM DNA Profiler
RoofDek D46 0.90mm Alu perforated BIM DNA Profiler
RoofDek D46 0.90mm steel BIM DNA Profiler
RoofDek D46 0.90mm steel perforated BIM DNA Profiler
RoofDek D46 1.20mm Alu BIM DNA Profiler
RoofDek D46 1.20mm Alu peforared BIM DNA Profiler
RoofDek D46 1.20mm steel BIM DNA Profiler
RoofDek D46 1.20mm steel perforated BIM DNA Profiler

In addition to our DNA Profiler, you can access our BIM content at BIMobject.com

Product Name Link
RoofDek D46 BIM Object

​​​​​​​​​​​​​​

 

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-sustainability-optemis-carbon-lite

Optemis™ Carbon Lite

The launch of Optemis Carbon Lite is an important step in our ongoing decarbonisation journey. It demonstrates our progress and represents a unique solution for customers in the form of a flexible, lower CO2 steel offering.

Optemis Carbon Lite is a fully certified in-setting scheme with COsavings achieved from implemented projects, verified by a 3rd party auditor, DNV, and credited to our CO2 bank.  Our continued commitment to decarbonisation means reductions in CO2 emissions can now be passed on to our customers, enabling them to achieve immediate Scope 3 emission savings.

Revenues generated from the sale of Optemis Carbon Lite declarations are used to fund additional decarbonisation projects, generating further CO2 savings to be verified by DNV and speeding up our decarbonisation efforts.

By buying Optemis Carbon Lite from Tata Steel UK we, and our customers, will be actively contributing to a reduction in atmospheric CO2.

Find out more about Optemis Carbon Lite


Please accept marketing cookies to reach this.

Picture100.png

 

EN-Construction-Product-RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

​​​​​​​If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek-D46-downloads

Downloads

Select from below downloads

EN-Construction-Book a CPD

Book a CPD

We offer a range of face to face and online CPDs aimed at Engineers and Architects

These free seminars can be booked at any time between 9am and 5pm. Our online webinars can all be delivered via Skype for Business and Teams, but we can consider other platforms if this will not work for your practice.

Below outline the CPDs we have available - Book yours today

  • Decarbonising your structural hollow section designs
  • Essentials of Structural Hollow Sections
  • Welded Joints in Tubular Steelwork - Eurocode 3 Part 1-8
  • Concrete Filled Hollow Sections - Composite Design – Eurocode 4
  • Composite Floor Deck in Construction
  • Structural Roof Deck in Construction
  • Specifying metal clad envelope systems in accordance with ADB2 of the building regulations and the value of large scale system testing
  • RIBA 2030 climate challenge: How steel building envelope solutions contribute
  • Pre-finished steel standing seam systems for roof & wall cladding
  • CDM regulations 2015 and their impact on steel building envelope specification.
  • Steel building envelope systems for non-domestic buildings
  • Steel for roof and wall cladding

Book your CPD today

RIBA Approved CPD tata steel

 

 

 

 

 

 

EN-Construction-Product-RoofDek - D60

RoofDek D60
Specification details for RoofDek D60

EN-Construction-Product-RoofDek - D60 | Structural profile specification

Structural profile specification
RoofDek Tata Steel construction decking

 

RoofDek D60 is part of the shallow deck profile range which enables designers to find the balance between efficiency, aesthetics and structural performance.

Profile Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
D60 Steel 0.70 Interior Liner & Galvatite 8.34 3022 3772 70 - 756
Steel 0.90 Interior Liner & Galvatite 10.73 3348 4489 80 - 837
Steel 1.20 Interior Liner & Galvatite 14.32 3672 4923 85 - 918
Aluminium 0.90 Stucco 3.72 2300 3060 70 - 575
Aluminium 1.20 Mill 4.96 2542 3408 80 - 635

Notes
1. When RoofDek is supplied with Colorcoat HPS200 Ultra® pre finished steel, the above load span tables do not apply. Please contact our technical team for the load span tables in this instance.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min. flange steel beam.
4. Load spans calculated to Eurocode 3 and 9.

If you have any questions or for further information click here to contact us.

Request a product sample

EN-Construction-Product-RoofDek - D60 | Download BIM objects

Download BIM objects

BIM: The way you want it

The DNA Profiler has been designed to allow you to access Tata Steel’s product information (3d parametric objects & data) how you want, when you want, to the level of detail you want, in the format you want.

Product Name Link
RoofDek D60 0.70mm steel BIM DNA Profiler
RoofDek D60 0.70mm steel - Colorcoat BIM DNA Profiler
RoofDek D60 0.70mm steel perforated BIM DNA Profiler
RoofDek D60 0.70mm steel perforated - Colorcoat BIM DNA Profiler
RoofDek D60 0.90mm Alu BIM DNA Profiler
RoofDek D60 0.90mm Alu perforated BIM DNA Profiler
RoofDek D60 0.90mm steel BIM DNA Profiler
RoofDek D60 0.90mm steel perforated BIM DNA Profiler
RoofDek D60 1.20mm Alu BIM DNA Profiler
RoofDek D60 1.20mm Alu peforared BIM DNA Profiler
RoofDek D60 1.20mm steel BIM DNA Profiler
RoofDek D60 1.20mm steel perforated BIM DNA Profiler

In addition to our DNA Profiler, you can access our BIM content at BIMobject.com

Product Name Link
RoofDek D60 (Shallow Deck) BIM Object

​​​​​​​​​​​​​​

 

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-sustainability-optemis-carbon-lite

Optemis™ Carbon Lite

The launch of Optemis Carbon Lite is an important step in our ongoing decarbonisation journey. It demonstrates our progress and represents a unique solution for customers in the form of a flexible, lower CO2 steel offering.

Optemis Carbon Lite is a fully certified in-setting scheme with COsavings achieved from implemented projects, verified by a 3rd party auditor, DNV, and credited to our CO2 bank.  Our continued commitment to decarbonisation means reductions in CO2 emissions can now be passed on to our customers, enabling them to achieve immediate Scope 3 emission savings.

Revenues generated from the sale of Optemis Carbon Lite declarations are used to fund additional decarbonisation projects, generating further CO2 savings to be verified by DNV and speeding up our decarbonisation efforts.

By buying Optemis Carbon Lite from Tata Steel UK we, and our customers, will be actively contributing to a reduction in atmospheric CO2.

Find out more about Optemis Carbon Lite


Please accept marketing cookies to reach this.

Picture100.png

 

EN-Construction-Product-RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

​​​​​​​If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek-D60-downloads

Downloads

Select from below downloads

EN-Construction-Book a CPD

Book a CPD

We offer a range of face to face and online CPDs aimed at Engineers and Architects

These free seminars can be booked at any time between 9am and 5pm. Our online webinars can all be delivered via Skype for Business and Teams, but we can consider other platforms if this will not work for your practice.

Below outline the CPDs we have available - Book yours today

  • Decarbonising your structural hollow section designs
  • Essentials of Structural Hollow Sections
  • Welded Joints in Tubular Steelwork - Eurocode 3 Part 1-8
  • Concrete Filled Hollow Sections - Composite Design – Eurocode 4
  • Composite Floor Deck in Construction
  • Structural Roof Deck in Construction
  • Specifying metal clad envelope systems in accordance with ADB2 of the building regulations and the value of large scale system testing
  • RIBA 2030 climate challenge: How steel building envelope solutions contribute
  • Pre-finished steel standing seam systems for roof & wall cladding
  • CDM regulations 2015 and their impact on steel building envelope specification.
  • Steel building envelope systems for non-domestic buildings
  • Steel for roof and wall cladding

Book your CPD today

RIBA Approved CPD tata steel

 

 

 

 

 

 

EN-Construction-Product-RoofDek - D100

RoofDek D100
Specification details for RoofDek D100

EN-Construction-Product-RoofDek - D100 | Structural profile specification

Structural profile specification
RoofDek Tata Steel construction decking

RoofDek D100 is part of our deep deck profile range which has exceptional strength and span capability, providing a rugged structural platform for all roofing types. They are ideal for large span buildings where they reduce the need for purlins. 

Profile Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
D100 Steel 0.70 Interior Liner & Galvatite 9.64 4409 4696 110 - 1102
Steel 0.90 Interior Liner & Galvatite 12.41 4788 5869 120 - 1197
Steel 1.20 Interior Liner & Galvatite 16.57 5245 7034 125 - 1311
Aluminium 0.90 Stucco 4.30 3298 3769 110 - 825
Aluminium 1.20 Mill 5.74 3642 4883 120 - 910

Notes
1. When RoofDek is supplied with Colorcoat HPS200 Ultra® pre finished steel, the above load span tables do not apply. Please contact our technical team for the load span tables in this instance.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min flange steel beam.
4. For maximum Load/Span in double span conditions, contract the technical department.
5. The Interior Liner colour on D135, D153 and D200 is RAL9002.

If you have any questions or for further information click here to contact us.

Request a product sample

EN-Construction-Product-RoofDek - D100 | Download BIM objects

Download BIM objects

BIM: The way you want it

The DNA Profiler has been designed to allow you to access Tata Steel’s product information (3d parametric objects & data) how you want, when you want, to the level of detail you want, in the format you want.

Product Name Link
RoofDek D100 0.7mm steel BIM DNA Profiler
RoofDek D100 0.7mm steel - Colorcoat BIM DNA Profiler
RoofDek D100 0.9mm Alu BIM DNA Profiler
RoofDek D100 0.9mm Alu perforated BIM DNA Profiler
RoofDek D100 0.9mm steel BIM DNA Profiler
RoofDek D100 0.9mm steel perforated BIM DNA Profiler
RoofDek D100 1.2mm Alu BIM DNA Profiler
RoofDek D100 1.2mm Alu perforated BIM DNA Profiler
RoofDek D100 1.2mm steel BIM DNA Profiler
RoofDek D100 1.2mm steel perforated BIM DNA Profiler

In addition to our DNA Profiler, you can access our BIM content at BIMobject.com

Product Name Link
RoofDek D100 (Deep Deck) BIM Object

 

 

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-sustainability-optemis-carbon-lite

Optemis™ Carbon Lite

The launch of Optemis Carbon Lite is an important step in our ongoing decarbonisation journey. It demonstrates our progress and represents a unique solution for customers in the form of a flexible, lower CO2 steel offering.

Optemis Carbon Lite is a fully certified in-setting scheme with COsavings achieved from implemented projects, verified by a 3rd party auditor, DNV, and credited to our CO2 bank.  Our continued commitment to decarbonisation means reductions in CO2 emissions can now be passed on to our customers, enabling them to achieve immediate Scope 3 emission savings.

Revenues generated from the sale of Optemis Carbon Lite declarations are used to fund additional decarbonisation projects, generating further CO2 savings to be verified by DNV and speeding up our decarbonisation efforts.

By buying Optemis Carbon Lite from Tata Steel UK we, and our customers, will be actively contributing to a reduction in atmospheric CO2.

Find out more about Optemis Carbon Lite


Please accept marketing cookies to reach this.

Picture100.png

 

EN-Construction-Product-RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

​​​​​​​If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek-D100-downloads

Downloads

Select from below downloads

EN-Construction-Book a CPD

Book a CPD

We offer a range of face to face and online CPDs aimed at Engineers and Architects

These free seminars can be booked at any time between 9am and 5pm. Our online webinars can all be delivered via Skype for Business and Teams, but we can consider other platforms if this will not work for your practice.

Below outline the CPDs we have available - Book yours today

  • Decarbonising your structural hollow section designs
  • Essentials of Structural Hollow Sections
  • Welded Joints in Tubular Steelwork - Eurocode 3 Part 1-8
  • Concrete Filled Hollow Sections - Composite Design – Eurocode 4
  • Composite Floor Deck in Construction
  • Structural Roof Deck in Construction
  • Specifying metal clad envelope systems in accordance with ADB2 of the building regulations and the value of large scale system testing
  • RIBA 2030 climate challenge: How steel building envelope solutions contribute
  • Pre-finished steel standing seam systems for roof & wall cladding
  • CDM regulations 2015 and their impact on steel building envelope specification.
  • Steel building envelope systems for non-domestic buildings
  • Steel for roof and wall cladding

Book your CPD today

RIBA Approved CPD tata steel

 

 

 

 

 

 

EN-Construction-Product-RoofDek - D137

RoofDek D137
Specification details for RoofDek D137

EN-Construction-Product-RoofDek - D137 | Structural profile specification

Structural profile specification
RoofDek Tata Steel construction decking

RoofDek D137 is part of our deep deck profile range which has exceptional strength and span capability, providing a rugged structural platform for all roofing types. They are ideal for large span buildings where they reduce the need for purlins.

Profile Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
D137 Steel 0.75 Interior Liner & Galvatite 9.45 4930 4988 150 - 1233
Steel 0.90 Interior Liner & Galvatite 11.35 5570 6168 160 - 1393
Steel 1.25 Interior Liner & Galvatite 15.78 6176 8281 180 - 1544
Aluminium 1.20 5.25 4189 5039 170 - 1047

Notes
1. When RoofDek is supplied with Colorcoat HPS200 Ultra® pre finished steel, the above load span tables do not apply. Please contact our technical team for the load span tables in this instance.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min flange steel beam.
4. For maximum Load/Span in double span conditions, contract the technical department.
5. The Interior Liner colour on D137, D153 and D200 is RAL9002.

If you have any questions or for further information click here to contact us.

Request a product sample

EN-Construction-Product-RoofDek - D137 | Download BIM objects

Download BIM objects

BIM: The way you want it

The DNA Profiler has been designed to allow you to access Tata Steel’s product information (3d parametric objects & data) how you want, when you want, to the level of detail you want, in the format you want.

Product Name Link
RoofDek D135 0.75mm steel perforated BIM DNA Profiler
RoofDek D135 0.75mm steel perforated BIM DNA Profiler
RoofDek D135 0.88mm steel BIM DNA Profiler
RoofDek D135 0.88mm steel perforated BIM DNA Profiler
RoofDek D135 1.25mm steel BIM DNA Profiler
RoofDek D135 1.25mm steel perforated BIM DNA Profiler

In addition to our DNA Profiler, you can access our BIM content at BIMobject.com

Product Name Link
RoofDek D135 BIM Object

​​​​​​​​​​​​​​

 

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-sustainability-optemis-carbon-lite

Optemis™ Carbon Lite

The launch of Optemis Carbon Lite is an important step in our ongoing decarbonisation journey. It demonstrates our progress and represents a unique solution for customers in the form of a flexible, lower CO2 steel offering.

Optemis Carbon Lite is a fully certified in-setting scheme with COsavings achieved from implemented projects, verified by a 3rd party auditor, DNV, and credited to our CO2 bank.  Our continued commitment to decarbonisation means reductions in CO2 emissions can now be passed on to our customers, enabling them to achieve immediate Scope 3 emission savings.

Revenues generated from the sale of Optemis Carbon Lite declarations are used to fund additional decarbonisation projects, generating further CO2 savings to be verified by DNV and speeding up our decarbonisation efforts.

By buying Optemis Carbon Lite from Tata Steel UK we, and our customers, will be actively contributing to a reduction in atmospheric CO2.

Find out more about Optemis Carbon Lite


Please accept marketing cookies to reach this.

Picture100.png

 

EN-Construction-Product-RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

​​​​​​​If you have any questions or for further information click here to contact us.

EN-Construction-Book a CPD

Book a CPD

We offer a range of face to face and online CPDs aimed at Engineers and Architects

These free seminars can be booked at any time between 9am and 5pm. Our online webinars can all be delivered via Skype for Business and Teams, but we can consider other platforms if this will not work for your practice.

Below outline the CPDs we have available - Book yours today

  • Decarbonising your structural hollow section designs
  • Essentials of Structural Hollow Sections
  • Welded Joints in Tubular Steelwork - Eurocode 3 Part 1-8
  • Concrete Filled Hollow Sections - Composite Design – Eurocode 4
  • Composite Floor Deck in Construction
  • Structural Roof Deck in Construction
  • Specifying metal clad envelope systems in accordance with ADB2 of the building regulations and the value of large scale system testing
  • RIBA 2030 climate challenge: How steel building envelope solutions contribute
  • Pre-finished steel standing seam systems for roof & wall cladding
  • CDM regulations 2015 and their impact on steel building envelope specification.
  • Steel building envelope systems for non-domestic buildings
  • Steel for roof and wall cladding

Book your CPD today

RIBA Approved CPD tata steel

 

 

 

 

 

 

EN-Construction-Product-RoofDek - D153

RoofDek D153
Specification details fro RoofDek 153

EN-Construction-Product-RoofDek - D153 | Structural profile specification

Structural profile specification
RoofDek Tata Steel construction decking

RoofDek D153 is part of our deep deck profile range which has exceptional strength and span capability, providing a rugged structural platform for all roofing types. They are ideal for large span buildings where they reduce the need for purlins.

Profile Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
D153 Steel 0.75 Interior Liner 10.50 5162 4898 165 - 1291
Steel 0.88 Interior Liner 12.33 5946 5865 175 - 1487
Steel 1.25 Interior Liner 17.54 6737 8150 195 - 1684

Notes
1. When RoofDek is supplied with Colorcoat HPS200 Ultra® pre finished steel, the above load span tables do not apply. Please contact our technical team for the load span tables in this instance.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min flange steel beam.
4. For maximum Load/Span in double span conditions, contract the technical department.
5. The Interior Liner colour on D135, D153 and D200 is RAL9002.

​​​​​​​If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek - D153 | Download BIM objects

Download BIM objects

BIM: The way you want it

The DNA Profiler has been designed to allow you to access Tata Steel’s product information (3d parametric objects & data) how you want, when you want, to the level of detail you want, in the format you want.

Product Name Link
RoofDek D153 0.75mm steel BIM DNA Profiler
RoofDek D153 0.75mm steel Alu perforated BIM DNA Profiler
RoofDek D153 0.88mm steel BIM DNA Profiler
RoofDek D153 0.88mm steel perforated BIM DNA Profiler
RoofDek D153 1.25mm steel BIM DNA Profiler
RoofDek D153 1.25mm steel perforated BIM DNA Profiler

In addition to our DNA Profiler, you can access our BIM content at BIMobject.com

Product Name Link
RoofDek D153 (Deep Deck) BIM Object

EN-Construction-Product-RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-sustainability-optemis-carbon-lite

Optemis™ Carbon Lite

The launch of Optemis Carbon Lite is an important step in our ongoing decarbonisation journey. It demonstrates our progress and represents a unique solution for customers in the form of a flexible, lower CO2 steel offering.

Optemis Carbon Lite is a fully certified in-setting scheme with COsavings achieved from implemented projects, verified by a 3rd party auditor, DNV, and credited to our CO2 bank.  Our continued commitment to decarbonisation means reductions in CO2 emissions can now be passed on to our customers, enabling them to achieve immediate Scope 3 emission savings.

Revenues generated from the sale of Optemis Carbon Lite declarations are used to fund additional decarbonisation projects, generating further CO2 savings to be verified by DNV and speeding up our decarbonisation efforts.

By buying Optemis Carbon Lite from Tata Steel UK we, and our customers, will be actively contributing to a reduction in atmospheric CO2.

Find out more about Optemis Carbon Lite


Please accept marketing cookies to reach this.

Picture100.png

 

EN-Construction-Product-RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

​​​​​​​If you have any questions or for further information click here to contact us.

EN-Construction-Book a CPD

Book a CPD

We offer a range of face to face and online CPDs aimed at Engineers and Architects

These free seminars can be booked at any time between 9am and 5pm. Our online webinars can all be delivered via Skype for Business and Teams, but we can consider other platforms if this will not work for your practice.

Below outline the CPDs we have available - Book yours today

  • Decarbonising your structural hollow section designs
  • Essentials of Structural Hollow Sections
  • Welded Joints in Tubular Steelwork - Eurocode 3 Part 1-8
  • Concrete Filled Hollow Sections - Composite Design – Eurocode 4
  • Composite Floor Deck in Construction
  • Structural Roof Deck in Construction
  • Specifying metal clad envelope systems in accordance with ADB2 of the building regulations and the value of large scale system testing
  • RIBA 2030 climate challenge: How steel building envelope solutions contribute
  • Pre-finished steel standing seam systems for roof & wall cladding
  • CDM regulations 2015 and their impact on steel building envelope specification.
  • Steel building envelope systems for non-domestic buildings
  • Steel for roof and wall cladding

Book your CPD today

RIBA Approved CPD tata steel

 

 

 

 

 

 

EN-Construction-Product-RoofDek - D159

RoofDek D159
Specification details for RoofDek D159

EN-Construction-Product-RoofDek - D159 | Structural profile specification

Structural profile specification
RoofDek Tata Steel construction decking

RoofDek D159 is part of our deep deck profile range which has exceptional strength and span capability, providing a rugged structural platform for all roofing types. They are ideal for large span buildings where they reduce the need for purlins.

Profile Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
D159 Steel 1.25 Interior Liner 19.19 7101 8595 220 - 1775
Aluminium 1.50 Mill 7.97 5243 6559 200 - 1311

Notes
1. When RoofDek is supplied with Colorcoat HPS200 Ultra® pre finished steel, the above load span tables do not apply. Please contact our technical team for the load span tables in this instance.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min flange steel beam.
4. For maximum Load/Span in double span conditions, contract the technical department.
5. The Interior Liner colour on D135, D153 and D200 is RAL9002.

If you have any questions or for further information click here to contact us.

Request a product sample

EN-Construction-Product-RoofDek - D159 | Download BIM objects

Download BIM objects

BIM: The way you want it

The DNA Profiler has been designed to allow you to access Tata Steel’s product information (3d parametric objects & data) how you want, when you want, to the level of detail you want, in the format you want.

Product Name Link
RoofDek D159 1.25mm steel BIM DNA Profiler
RoofDek D159 1.25mm steel perforated BIM DNA Profiler
RoofDek D159 1.5mm Alu BIM DNA Profiler
RoofDek D159 1.5mm Alu perforated BIM DNA Profiler

In addition to our DNA Profiler, you can access our BIM content at BIMobject.com

Product Name Link
RoofDek D159 BIM Object

 

 

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-sustainability-optemis-carbon-lite

Optemis™ Carbon Lite

The launch of Optemis Carbon Lite is an important step in our ongoing decarbonisation journey. It demonstrates our progress and represents a unique solution for customers in the form of a flexible, lower CO2 steel offering.

Optemis Carbon Lite is a fully certified in-setting scheme with COsavings achieved from implemented projects, verified by a 3rd party auditor, DNV, and credited to our CO2 bank.  Our continued commitment to decarbonisation means reductions in CO2 emissions can now be passed on to our customers, enabling them to achieve immediate Scope 3 emission savings.

Revenues generated from the sale of Optemis Carbon Lite declarations are used to fund additional decarbonisation projects, generating further CO2 savings to be verified by DNV and speeding up our decarbonisation efforts.

By buying Optemis Carbon Lite from Tata Steel UK we, and our customers, will be actively contributing to a reduction in atmospheric CO2.

Find out more about Optemis Carbon Lite


Please accept marketing cookies to reach this.

Picture100.png

 

EN-Construction-Product-RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

​​​​​​​If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek-D159-downloads

Downloads

Select from below downloads

EN-Construction-Book a CPD

Book a CPD

We offer a range of face to face and online CPDs aimed at Engineers and Architects

These free seminars can be booked at any time between 9am and 5pm. Our online webinars can all be delivered via Skype for Business and Teams, but we can consider other platforms if this will not work for your practice.

Below outline the CPDs we have available - Book yours today

  • Decarbonising your structural hollow section designs
  • Essentials of Structural Hollow Sections
  • Welded Joints in Tubular Steelwork - Eurocode 3 Part 1-8
  • Concrete Filled Hollow Sections - Composite Design – Eurocode 4
  • Composite Floor Deck in Construction
  • Structural Roof Deck in Construction
  • Specifying metal clad envelope systems in accordance with ADB2 of the building regulations and the value of large scale system testing
  • RIBA 2030 climate challenge: How steel building envelope solutions contribute
  • Pre-finished steel standing seam systems for roof & wall cladding
  • CDM regulations 2015 and their impact on steel building envelope specification.
  • Steel building envelope systems for non-domestic buildings
  • Steel for roof and wall cladding

Book your CPD today

RIBA Approved CPD tata steel

 

 

 

 

 

 

EN-Construction-Product-RoofDek - D200

RoofDek D200
Specification details for RoofDek D200

EN-Construction-Product-RoofDek - D200 | Structural profile specification

Structural profile specification
RoofDek Tata Steel construction decking

RoofDek D200 is part of our deep deck profile range which has exceptional strength and span capability, providing a rugged structural platform for all roofing types. They are ideal for large span buildings where they reduce the need for purlins.

Profile Material Gauge and finish (mm) Weight (kg/m2) Load/Span maximum single span (mm) Load/Span maximum double span (mm) Minimum self curve (m) Minimum Factory curve (mm) Cantillever (mm)
D200 Steel 0.88 Interior Liner 13.81 5698 6405 260 - 1424
Steel 1.25 Interior Liner 19.65 8403 9217 280 - 2101
Steel 1.50 Interior Liner 23.59 8947 10781 300 - 2237

Notes
1. When RoofDek is supplied with Colorcoat HPS200 Ultra® pre finished steel, the above load span tables do not apply. Please contact our technical team for the load span tables in this instance.
2. Calculations accord to Eurocode, however a fixings check is also required.
3. Load table is based on the deck bearing onto 100mm min flange steel beam.
4. For maximum Load/Span in double span conditions, contract the technical department.
5. The Interior Liner colour on D135, D153 and D200 is RAL9002.

If you have any questions or for further information click here to contact us.

Request a product sample

EN-Construction-Product-RoofDek - D200 | Download BIM objects

Download BIM objects

BIM: The way you want it

The DNA Profiler has been designed to allow you to access Tata Steel’s product information (3d parametric objects & data) how you want, when you want, to the level of detail you want, in the format you want.

Product Name Link
RoofDek D200 0.88mm steel BIM DNA Profiler
RoofDek D200 0.88mm steel perforated BIM DNA Profiler
RoofDek D200 1.25mm steel BIM DNA Profiler
RoofDek D200 1.25mm steel perforated BIM DNA Profiler
RoofDek D200 1.5mm steel perforated BIM DNA Profiler
RoofDek D200 1.5mm steel perforated BIM DNA Profiler

In addition to our DNA Profiler, you can access our BIM content at BIMobject.com

Product Name Link
RoofDek D200 BIM Object

​​​​​​​​​​​​​​

 

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek quick selector

RoofDek quick selector

The increasing complexity of roof decking projects makes any software aimed at easing the process very welcome indeed.

To aid this, Tata Steel introduced the RoofDek quick selector, a web based structural analysis tool. It allows a user to rapidly select the most appropriate deck for the application and structural requirements using a PC or tablet, including iPad.

The software provides an optimised RoofDek specification, and it also allows the user to choose an alternative RoofDek profile. The RoofDek quick selector page contains pre-populated span and load figures as an example, but users can then modify these to their own requirements to find the right decking profile for a given project. All calculations are carried in accordance with Eurocode 3 on one screen and may be printed out as a record of the design.

The RoofDek quick Selector augments Tata Steel’s suite of roof decking software.

If you have any questions or for further information click here to contact us.

EN-Construction-Product-RoofDek | RoofDek Analysis Software, Powered by Tekla Tedds

RoofDek Analysis Software, Powered by Tekla Tedds

Our RoofDek Analysis Software has been created in partnership with leading software developer, Trimble, using their widely-adopted structural calculation software, Tekla Tedds, as the platform for the deck analysis software.

This software compliments and enhances our RoofDek quick selector, allowing users to conduct full deck analysis.

It also completely satisfies the need to comply with Eurocode 3 Design of Steel Structures and Eurocode 9 – Design of Aluminium Structures.

Users are able to input up to four spans, two of which can be cantilevers. Extended end laps can be included as internal supports. Thickness of deck can be varied each side of extended end laps.

If you have any questions or for further information click here to contact us.

EN-Construction-sustainability-optemis-carbon-lite

Optemis™ Carbon Lite

The launch of Optemis Carbon Lite is an important step in our ongoing decarbonisation journey. It demonstrates our progress and represents a unique solution for customers in the form of a flexible, lower CO2 steel offering.

Optemis Carbon Lite is a fully certified in-setting scheme with COsavings achieved from implemented projects, verified by a 3rd party auditor, DNV, and credited to our CO2 bank.  Our continued commitment to decarbonisation means reductions in CO2 emissions can now be passed on to our customers, enabling them to achieve immediate Scope 3 emission savings.

Revenues generated from the sale of Optemis Carbon Lite declarations are used to fund additional decarbonisation projects, generating further CO2 savings to be verified by DNV and speeding up our decarbonisation efforts.

By buying Optemis Carbon Lite from Tata Steel UK we, and our customers, will be actively contributing to a reduction in atmospheric CO2.

Find out more about Optemis Carbon Lite


Please accept marketing cookies to reach this.

Picture100.png

 

EN-Construction-Product-RoofDek | Design support

Design support

We maintain a friendly technical help desk which is freely available to all architects, engineers and contractors to assist with all aspects of RoofDek and liner tray design. The services we offer include:

Specification service - Our RoofDek team are able to provide a comprehensive specification service. Assistance in creating NBS specifications for RoofDek and trays can be provided to ensure the correct deck or tray is specified for the right application.

Design calculations & diaphragm design - To assist the specifier, the team are able to provide design calculations for live, dead, wind and snow drift loads and where required diaphragm design calculations.

Sound absorption and reduction - RoofDek perforated decking provides excellent sound absorption characteristics, our technical team can provide details of systems tested for both absorption and reduction. We also offer indicative acoustic calculations on differing build ups.

Roof Safety - Our technical department can provide details of non fragility performance of the RoofDek itself and the use of fall prevention and fall arrest systems on RoofDek roofs.

Inhouse CPD seminars - Primarily aimed at engineers and architects, these free seminars last around 50 minutes, ending with a question & answer session and are delivered by our experienced regional teams.

Topics include:

  • Structural roof deck in construction
  • Composite floor deck in construction
  • Sustainable steel cladding refurbishment solutions
  • Factory tour of Insulated panel lines

To request a CPD seminar please click here.

​​​​​​​If you have any questions or for further information click here to contact us.

EN-Construction-Book a CPD

Book a CPD

We offer a range of face to face and online CPDs aimed at Engineers and Architects

These free seminars can be booked at any time between 9am and 5pm. Our online webinars can all be delivered via Skype for Business and Teams, but we can consider other platforms if this will not work for your practice.

Below outline the CPDs we have available - Book yours today

  • Decarbonising your structural hollow section designs
  • Essentials of Structural Hollow Sections
  • Welded Joints in Tubular Steelwork - Eurocode 3 Part 1-8
  • Concrete Filled Hollow Sections - Composite Design – Eurocode 4
  • Composite Floor Deck in Construction
  • Structural Roof Deck in Construction
  • Specifying metal clad envelope systems in accordance with ADB2 of the building regulations and the value of large scale system testing
  • RIBA 2030 climate challenge: How steel building envelope solutions contribute
  • Pre-finished steel standing seam systems for roof & wall cladding
  • CDM regulations 2015 and their impact on steel building envelope specification.
  • Steel building envelope systems for non-domestic buildings
  • Steel for roof and wall cladding

Book your CPD today

RIBA Approved CPD tata steel